Shark NAVIGATOR LIFT-AWAY NV354Q Series Vacuum Cleaner Manual

The Shark NAVIGATOR LIFT-AWAY NV354Q Series is a versatile upright vacuum cleaner featuring Lift-Away technology for portable cleaning, Anti-Allergen Complete Seal technology with a HEPA filter, powered floor nozzle for carpets and hard floors, swivel steering for maneuverability, large-capacity dust cup, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, powered floor nozzle, swivel steering handle, dust cup with HEPA filter, crevice tool, dusting brush, and upholstery tool.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	Sealed system with HEPA filter traps 99.9% of dust and allergens
Powered Floor Nozzle	Motorized brush roll for deep carpet cleaning and hard floors
Swivel Steering	Enhanced maneuverability around furniture and obstacles
Large Capacity Dust Cup	Easy-empty, no bags required
Attachments	Crevice tool, dusting brush, upholstery tool included
Fingertip Controls	On/off, brush roll on/off, suction power settings on handle
Wand Release	Quick-release button for adjusting wand length
Floor Selector Switch	Adjusts brush roll for carpets or hard floors
Headlight	LED light on floor nozzle illuminates dark areas

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

Attach handle: Insert handle into top of vacuum body until it clicks into place.
Connect hose: Attach hose end to the vacuum body port, ensuring secure connection.
Install wand: Insert wand into handle socket; press release button to adjust length.
Attach floor nozzle: Connect wand to floor nozzle until it clicks.
Install filters: Place foam and felt filters into dust cup; install HEPA filter in back.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug into standard 120V outlet; turn on power switch.

Select floor setting: Use switch on floor nozzle for carpets or hard floors.
Adjust suction: Use power settings on handle for desired suction level.
Begin vacuuming: Push vacuum forward on floors; use back-and-forth motions.
Empty dust cup: Press release button to remove and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll. Do not vacuum wet surfaces.

Specifications

Model Series: NV354Q.
Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
Floor Nozzle: Powered brush roll with LED headlight.
Attachments: Crevice tool, dusting brush, upholstery tool.
Dust Cup Capacity: 1.5 quarts.
Cord Length: 25 feet.
Power Source: 120V AC, 60Hz.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Located on handle and floor nozzle. Handle: Power ON/OFF switch, suction power settings (Low/High), brush roll ON/OFF. Floor Nozzle: Floor selector switch (Carpet/Hard Floor), headlight. Lift-Away: Release button to detach pod.

Operation: Turn on power switch; select floor type; adjust suction as needed. Use brush roll ON/OFF for delicate rugs. For above-floor cleaning, detach Lift-Away pod.

Using Attachments

For stairs, furniture, ceilings, and tight spaces.

Detach wand from floor nozzle.
Choose attachment: Crevice tool for edges; dusting brush for surfaces; upholstery tool for furniture.
Connect to wand or hose end.
Turn on vacuum and clean.

Tip: Use dusting brush on blinds and lampshades; crevice tool in corners.

Lift-Away Mode

Enables portable cleaning without full vacuum weight.

Press Lift-Away release button on vacuum body.
Lift pod away from floor nozzle; carry by handle.
Attach hose to pod; use wand and attachments as needed.
Return pod to docking station on floor nozzle to reconnect.

WARNING! Ensure pod is securely docked before upright vacuuming. Do not lift by hose.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup after each use; wash with water monthly (air dry completely).
Clean filters: Foam and felt filters every 3 months; HEPA filter every 12 months.
Clear brush roll: Remove debris and hair from brush roll weekly.
Check hose and attachments for clogs; clear if necessary.

CAUTION! Unplug vacuum before maintenance. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brush roll not spinning	Debris/switch off	Clear brush roll of debris; ensure brush roll switch is ON.
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; check circuit breaker.
Lift-Away pod not detaching	Release button/lock	Press release button firmly; ensure pod is unlocked from dock.
Unusual noise	Obstruction in system	Turn off and unplug; inspect hose, wand, and nozzle for foreign objects.

Reset: Unplug for 1 minute; plug back in.

Service: 1-800-798-7398; sharkclean.com