Shark Navigator Lift-Away NV352 26 Vacuum Cleaner Manual

The Shark Navigator Lift-Away NV352 26 is a versatile upright vacuum cleaner featuring Lift-Away technology for portable above-floor cleaning, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets, a wide upholstery tool, a crevice tool, and a dusting brush. It includes a 26-foot power cord, a large-capacity dust cup, and multiple cleaning modes (Floor, Lift-Away, Handheld). Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes 7. Using Attachments 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, dust cup with HEPA filter, motorized brushroll, hose, wand, and accessory tools.

FeatureDescription
Lift-Away TechnologyDetachable pod for portable cleaning of stairs, furniture, and above-floor areas
Anti-Allergen Complete SealSealed system with HEPA filter to trap 99.9% of dust and allergens
Motorized BrushrollDeep cleans carpets and agitates embedded dirt
Wide Upholstery ToolFor cleaning sofas, cushions, and car interiors
Crevice ToolFor tight spaces, corners, and along edges
Dusting BrushSoft brush for delicate surfaces and dusting
26-Foot Power CordExtended reach for large rooms without unplugging
Large Capacity Dust CupEasy-to-empty container for less frequent disposal
Floor/Lift-Away SelectorSwitch between upright floor cleaning and portable mode
Brushroll On/OffDisable brushroll for hard floors or delicate rugs

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

  1. Attach the wand: Insert the wand into the hose port on the vacuum body until it clicks.
  2. Connect the hose: Attach the hose to the wand and the pod inlet, ensuring secure connections.
  3. Install accessories: Store the crevice tool, dusting brush, and upholstery tool on the accessory holder.
  4. Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Before cleaning, perform initial setup and check functions.

  1. Check filter: Ensure the HEPA filter is properly seated in the dust cup lid.
  2. Select mode: Use the Floor/Lift-Away selector to choose the desired cleaning mode.
  3. Adjust height: For carpets, set the floor nozzle to the appropriate height setting.
  4. Test suction: Turn on the vacuum and verify suction power and brushroll operation.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and cords away from the brushroll.

Specifications

Controls and Settings

Main controls located on the vacuum body and handle.

On-Body Controls: POWER switch, Floor/Lift-Away selector, Brushroll On/Off switch, Cord wrap hooks.

Handle Controls: Wand release button, hose grip.

Settings: Floor nozzle height adjustment (for carpets), suction power control (via brushroll on/off), accessory selection for different surfaces.

Cleaning Modes

Three primary modes for versatile cleaning.

  1. Floor Mode (Upright): For carpets and bare floors. Engage brushroll for carpets; turn off for hard floors.
  2. Lift-Away Mode: Detach the pod from the floor nozzle for portable cleaning of stairs, under furniture, and above-floor areas.
  3. Handheld Mode: Remove the pod from the wand and attach tools directly for spot cleaning and tight spaces.

Tip: Use the appropriate mode and attachment for the surface to maximize cleaning efficiency.

Using Attachments

Attachments enhance cleaning for specific tasks.

  1. Motorized Brushroll: For deep cleaning carpets. Ensure it is free of tangles before use.
  2. Wide Upholstery Tool: Attach to the hose or wand for cleaning sofas, mattresses, and car seats.
  3. Crevice Tool: Use for edges, corners, between cushions, and other tight spaces.
  4. Dusting Brush: For delicate surfaces like blinds, lampshades, and keyboards.

WARNING! Do not use the motorized brushroll on hard floors without turning it off to avoid damage.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

  1. Empty Dust Cup: Unplug the vacuum. Press the dust cup release button and empty contents into trash.
  2. Clean Filters: Rinse the HEPA filter and pre-motor filter with cold water every 3 months. Air dry completely for 24 hours before reinstalling.
  3. Clear Brushroll: Regularly remove hair and debris wrapped around the brushroll. Use scissors if necessary.
  4. Check for Clogs: Inspect the hose, wand, and nozzle for obstructions if suction decreases.

CAUTION! Always unplug the vacuum before maintenance. Never use the vacuum without filters installed.

Regulatory Information

This vacuum cleaner complies with FCC Part 15 Subpart B for Class B digital devices. It meets applicable safety standards. Copyright © SharkNinja Operating LLC. All trademarks are owned by SharkNinja Operating LLC. For support, visit sharkclean.com or call 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord/outletCheck plug connection; try a different outlet; ensure POWER switch is on.
Loss of suctionFull dust cup/clogEmpty dust cup; check and clear clogs in hose, wand, or nozzle; clean filters.
Brushroll not spinningTangled debris/switchUnplug and clear brushroll of hair and debris; ensure Brushroll On/Off switch is set to ON.
Vacuum is overheatingClogged filters/full cupUnplug and let cool. Empty dust cup and clean filters; check for blockages.
Unusual noiseForeign object in brushroll or hoseUnplug and inspect brushroll, hose, and wand for obstructions; remove any debris.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com

Shark Navigator Lift-Away NV352 26 Vacuum Cleaner Manual © - All Rights Reserved 2025