Shark Navigator Lift-Away Deluxe NV360 26 Vacuum Cleaner Manual

The Shark Navigator Lift-Away Deluxe NV360 26 is a versatile upright vacuum cleaner featuring Lift-Away technology for portable above-floor cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, a motorized brushroll for carpets and hard floors, a large dust cup capacity, multiple attachments (crevice tool, dusting brush, pet multi-tool), swivel steering for maneuverability, and various cleaning modes. Powered by a standard electrical outlet. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized floor nozzle, wand, hose, and accessory set.

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

1. Attach the wand: Insert the wand into the socket on the main body until it clicks securely.
2. Connect the hose: Attach the hose end to the port on the vacuum body.
3. Attach floor nozzle: Slide the floor nozzle onto the wand until it locks into place.
4. Install accessories: Store crevice tool, dusting brush, and pet multi-tool on the accessory holder.
5. Plug into a standard electrical outlet.

WARNING! Ensure all parts are securely connected before use to prevent detachment during operation.

First-Time Use

Before first use, ensure filters are installed correctly and dust cup is empty.

1. Check filters: Ensure both the pre-motor and HEPA filters are properly seated in their compartments.
2. Select floor setting: Use the floor selector switch to match your surface (Carpet/Hard Floor).
3. Power on: Press the power foot pedal or switch on the handle.
4. Test attachments: Attach the hose and wand for above-floor cleaning; use accessories as needed.
5. Adjust suction: Use the floor selector or brushroll on/off for optimal cleaning on different surfaces.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark Navigator Lift-Away Deluxe NV360 26.
• Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
• Floor Nozzle: Motorized brushroll with automatic carpet/hard floor detection.
• Dust Cup Capacity: [Specify capacity, e.g., 1.2 dry quarts].
• Attachments: Crevice tool, dusting brush, pet multi-tool.
• Cord Length: [Specify length, e.g., 25 feet].
• Power Source: 120V AC, 60Hz.
• Weight: [Specify weight, e.g., 14 lbs].
• Warranty: Limited warranty as specified by SharkNinja.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, brushroll on/off button. Body: Floor selector switch (Carpet/Hard Floor), wand release button, hose release.

Operation Modes: Upright mode for floors, Lift-Away mode for portable cleaning. Suction Control: Adjust via floor selector. Brushroll Control: On for carpets, Off for hard floors/delicate rugs.

Accessory Use: Attach tools to wand or hose end for above-floor cleaning.

Cleaning Modes & Attachments

Upright Mode: For cleaning floors; use floor selector and brushroll as needed. Lift-Away Mode: Detach pod for cleaning stairs, furniture, ceilings, and other above-floor areas.

1. To activate Lift-Away: Press the release button on the pod and lift away from the floor nozzle.
2. Attach hose and wand: Connect to the pod for extended reach.
3. Use attachments: Select appropriate tool for the task (crevice tool for tight spaces, dusting brush for surfaces, pet multi-tool for upholstery).
4. Return to upright: Place pod back onto floor nozzle until it clicks into place.

Tip: For best results on carpets, make slow, overlapping passes. For hard floors, turn brushroll off if desired.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty dust cup: When dust reaches MAX line, or after each use.
2. Clean filters: Rinse pre-motor filter monthly; replace HEPA filter as needed (every 6-12 months).
3. Check brushroll: Regularly remove hair and debris wrapped around brushroll.
4. Inspect hose and wand: Clear any blockages to maintain suction.
5. Store properly: Wrap cord around cord hooks; store attachments on holder.

WARNING! Unplug vacuum before performing any maintenance. Do not use damaged parts.

Emptying the Dust Cup

Empty dust cup when it reaches the MAX line to maintain suction.

1. Turn off and unplug vacuum.
2. Press dust cup release button and remove cup from body.
3. Hold over trash can; press bottom latch to open door and empty contents.
4. Close door securely and reattach dust cup until it clicks.

CAUTION! Empty dust cup outdoors or in a well-ventilated area if containing fine dust or allergens.

Filter Care

Two filters: Pre-motor foam filter and post-motor HEPA filter.

1. Pre-motor filter: Rinse with cold water every month. Allow to air dry completely (24 hours) before reinstalling.
2. HEPA filter: Replace every 6-12 months under normal use, or more often if used frequently or for allergen control. Do not wash.
3. To access filters: Remove dust cup; filters are located in compartments behind the cup.

Important: Never operate vacuum without filters installed. Dry filters completely to prevent mold and motor damage.

Regulatory Information

This appliance complies with relevant safety standards. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, replacement parts, or warranty service, visit sharkclean.com or contact customer service at 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in. Check all connections and filters.

Service: For repairs not covered in manual, contact Shark Customer Service: 1-800-798-7398 or sharkclean.com.