Shark Navigator Lift-Away ADV LA322 Vacuum Cleaner Manual

The Shark Navigator Lift-Away ADV LA322 is a versatile upright vacuum cleaner featuring Lift-Away technology for portable above-floor cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, a motorized brushroll for carpets and hard floors, multiple cleaning modes (upright, Lift-Away, handheld), a large dust cup capacity, swivel steering for maneuverability, and various attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized floor nozzle, dust cup with HEPA filter, hose, wand, and accessory attachments.

Assembly & Setup

Unpack all parts from the box. Assemble on a flat, stable surface.

1. Attach the handle: Align the handle with the top of the vacuum body and push down until it clicks into place.
2. Connect the hose: Insert the hose end into the port on the front of the vacuum until it locks.
3. Attach the wand: Insert the wand into the hose grip until it clicks.
4. Install the floor nozzle: Align the nozzle with the bottom of the vacuum and push until it clicks securely.
5. Insert the HEPA filter: Place the filter into the filter compartment at the top of the dust cup.

WARNING! Ensure the vacuum is unplugged during assembly. Check that all parts are securely connected before first use.

First-Time Use

Plug the power cord into a standard 120V outlet. Ensure the dust cup is empty and the filter is installed.

1. Select surface setting: Use the Power/Surface switch to select CARPET, HARD FLOOR, or OFF (for bare floors or delicate rugs).
2. Turn on vacuum: Press the ON/OFF switch to the "I" position.
3. Begin cleaning: Push the vacuum forward and back in slow, overlapping strokes.
4. Use Lift-Away mode: Press the Lift-Away release button to detach the pod for cleaning stairs, furniture, or using attachments.
5. Empty dust cup: Press the dust cup release button and empty contents into trash when full.

CAUTION! Keep hair, loose clothing, fingers, and feet away from openings and moving parts. Do not use on wet surfaces.

Specifications

• Model: Navigator Lift-Away ADV LA322.
• Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
• Cleaning Modes: Upright, Lift-Away, Handheld.
• Motorized Brushroll: Yes, with automatic adjustment.
• Steering: Swivel steering for 360° maneuverability.
• Dust Cup Capacity: [Specify capacity, e.g., 1.5 quarts].
• Cord Length: [Specify length, e.g., 25 feet].
• Attachments: Pet Multi-Tool, Crevice Tool, Upholstery Tool, Dusting Brush.
• Power Source: 120V AC, 60Hz.
• Weight: [Specify approximate weight].

Controls and Modes

Main Controls: ON/OFF switch, Power/Surface switch (Carpet/Hard Floor/Off), Wand Release Pedal, Lift-Away Release Button, Dust Cup Release Button.

Cleaning Modes: Upright Mode: For cleaning carpets and hard floors. Lift-Away Mode: Detach the pod for portable cleaning of stairs, under furniture, and above-floor areas. Handheld Mode: Use with hose and attachments for detailed cleaning of upholstery, ceilings, and tight spaces.

Brushroll Control: The Power/Surface switch turns the motorized brushroll ON for carpets, adjusts it for hard floors, or OFF for delicate area rugs or to prevent scattering debris.

Using Attachments

Attachments connect to the end of the wand or directly to the hose in Lift-Away or Handheld mode.

1. Detach the wand: Press the Wand Release Pedal and pull the wand out.
2. Select attachment: Choose the appropriate tool (e.g., Crevice Tool for tight spaces).
3. Connect: Push the attachment onto the end of the wand or hose until it clicks.
4. Begin cleaning: Turn on the vacuum and guide the attachment over the surface.

Tip: The Pet Multi-Tool combines a bristle brush and upholstery tool for pet hair on furniture and stairs.

Cleaning Different Surfaces

Adjust settings and mode based on the surface.

1. Carpets: Set Power/Surface switch to CARPET. Use slow, overlapping passes.
2. Hard Floors (wood, tile, vinyl): Set switch to HARD FLOOR.
3. Delicate Rugs: Set switch to OFF to disable the brushroll.
4. Stairs: Use Lift-Away mode with the motorized floor nozzle or an attachment.
5. Upholstery & Draperies: Use Handheld mode with the Upholstery Tool or Dusting Brush.
6. CreVices & Edges: Use Handheld mode with the Crevice Tool.

WARNING! Do not vacuum up large, hard, or sharp objects, liquids, or hot ashes. Do not use on wet surfaces.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty Dust Cup: Press the release button and empty when debris reaches the MAX line. Clean the inside with a dry cloth.
2. Clean Filters:
   • Pre-Motor Foam Filter: Rinse with cold water every month. Air dry completely for 24 hours before reinstalling.
   • HEPA Filter: Tap gently to remove dust every 3 months. Replace every 12-18 months or as needed.
3. Clear Brushroll: Turn off and unplug the vacuum. Use scissors to cut away wrapped hair, strings, or fibers from the brushroll ends. Ensure it spins freely.
4. Check for Blockages: If suction is weak, check the hose, wand, attachments, and floor nozzle for clogs.

CAUTION! Always unplug the vacuum before performing any maintenance. Filters must be COMPLETELY DRY before reinstallation to prevent motor damage.

Regulatory Information

This appliance complies with relevant safety standards. Copyright and trademarks are property of SharkNinja Operating LLC. For customer service, replacement parts, or additional information, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Service: For issues not resolved above, contact SharkNinja Customer Service at 1-800-798-7398 or visit www.sharkclean.com. Do not attempt to repair the motor yourself.