Shark Navigator LIFT-AWAY ADV LA320 Series Vacuum Cleaner Manual

The Shark Navigator LIFT-AWAY ADV LA320 Series is a versatile upright vacuum cleaner featuring Lift-Away technology for portable above-floor cleaning, Anti-Allergen Complete Seal technology to trap dust and allergens, a motorized brushroll for carpets, a large-capacity dust cup, multiple attachments (crevice tool, dusting brush, pet multi-tool), and various cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Emptying the Dust Cup 8. Maintenance & Filter Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with handle, Lift-Away pod, motorized floor nozzle, hose, wand, and accessory tools.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	Sealed system with HEPA filter to trap 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and agitates debris
Large Capacity Dust Cup	Easy-empty, no-touch dust cup
Cleaning Modes	Upright, Lift-Away, and handheld modes
Accessory Storage	On-board storage for crevice tool and dusting brush
Pet Multi-Tool	Specialized attachment for pet hair on furniture and stairs
Power Cord	25-foot power cord with cord wrap
Fingertip Controls	On/off switch and brushroll on/off on handle
Wand Release Pedal	Foot pedal to detach wand for above-floor cleaning

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

Attach the handle: Insert handle into top of vacuum body until it clicks into place.
Connect the hose: Attach hose end to the port on the front of the vacuum body.
Attach the wand: Insert wand into the hose grip until it clicks.
Attach floor nozzle: Align nozzle with the vacuum body and push until it locks.
Install filters: Ensure both pre-motor and post-motor HEPA filters are properly seated.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in power cord and select cleaning mode.

Select mode: Use upright for carpets/floors; press Lift-Away release button for portable cleaning.
Adjust suction: Use brushroll on/off switch for hard floors vs. carpets.
Use attachments: Detach wand and attach desired tool (crevice, dusting brush, pet tool).
Empty dust cup: Press release button to remove and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll. Do not vacuum wet surfaces.

Specifications

Model: Shark Navigator LIFT-AWAY ADV LA320 Series.
Technology: Anti-Allergen Complete Seal with HEPA filter.
Dust Cup Capacity: 1.3 dry quarts.
Cord Length: 25 feet.
Cleaning Path Width: 10 inches.
Attachments Included: Crevice tool, dusting brush, pet multi-tool.
Filters: Pre-motor foam & felt, post-motor HEPA filter.
Power Source: 120V AC, 60Hz.
Weight: 14.2 lbs.

Controls and Settings

Main controls located on handle and body. Handle: Power on/off switch, brushroll on/off button. Body: Lift-Away release button, dust cup release, wand release pedal.

Cleaning Modes: Upright (for floors), Lift-Away (detached pod for stairs/upholstery), Handheld (with hose and tools).

Suction Control: Brushroll on for carpets; off for hard floors to prevent scattering debris. Height Adjustment: Automatic on motorized nozzle. Accessory Selection: Choose based on surface (crevice for tight spaces, dusting brush for surfaces, pet tool for hair).

Cleaning Modes & Attachments

Upright Mode: For carpets and bare floors. Lift-Away Mode: Detach pod for stairs, furniture, above-floor cleaning. Handheld Mode: Use hose with attachments for detailed cleaning.

Select attachment based on task: Crevice tool for edges/corners; dusting brush for shelves; pet multi-tool for upholstery.
Attach tool to end of wand or directly to hose.
Switch to appropriate mode and begin cleaning.

Tip: For best results on carpets, make slow, overlapping passes.

Emptying the Dust Cup

Empty dust cup when it reaches MAX fill line.

Turn off and unplug vacuum.
Press dust cup release button on body.
Hold over trash can; press bottom release latch to open door.
Shake gently to empty debris.
Close door and reattach dust cup until it clicks.

WARNING! Do not operate with full dust cup. Empty after each use for optimal performance.

Maintenance & Filter Care

Regular maintenance ensures peak performance. Clean filters every 3 months; replace HEPA filter every 12-18 months.

Pre-motor filter: Rinse under cold water; air dry 24 hours before reinstalling.
Post-motor HEPA filter: Tap gently to remove dust; replace when visibly worn.
Brushroll: Remove debris (hair, strings) regularly; check for wear.
Check hose and attachments for clogs.

CAUTION! Ensure all parts are completely dry before reassembly. Use only Shark brand replacement filters.

Regulatory Information

This vacuum cleaner complies with FCC Part 15 for Class B digital devices. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, nozzle, and filters for blockages.
Brushroll not spinning	Obstruction/overheat	Turn off, unplug, and remove debris from brushroll; wait 45 minutes if overheated.
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet; ensure on/off switch is engaged.
Unusual noise	Debris in airway	Inspect hose, wand, and nozzle for obstructions; remove foreign objects.
Dust escaping	Filter not installed	Ensure all filters are properly seated and clean; replace if damaged.

Reset: Unplug for 45 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com