Shark Navigator LIFT-AWAY ADV LA300C Series Vacuum Cleaner Manual

The Shark Navigator LIFT-AWAY ADV LA300C Series is a versatile upright vacuum cleaner featuring Lift-Away technology for portable deep cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, a motorized brushroll for carpets, a wide upholstery tool, a crevice tool, a dusting brush, and a pet power brush. It includes a 25-foot power cord, a large-capacity dust cup, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Emptying the Dust Cup 8. Filter Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized floor nozzle, hose, wand, and accessory tools.

Feature	Description
Lift-Away Technology	Detachable pod for portable above-floor cleaning
Anti-Allergen Complete Seal	HEPA filter traps 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and agitates debris
Wide Upholstery Tool	For cleaning furniture, stairs, and auto interiors
Crevice Tool	For tight spaces and edges
Dusting Brush	For delicate surfaces and dusting
Pet Power Brush	Motorized tool for pet hair on furniture
Carpet/Floor Selector	Switch between carpet and hard floor settings
Large Capacity Dust Cup	Easy-empty, bagless dust cup
25-Foot Power Cord	Extended reach for large areas

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat surface.

Attach the wand: Insert the wand into the hose port on the vacuum body until it clicks.
Connect the hose: Attach the hose to the wand and the pod inlet.
Attach floor nozzle: Connect the motorized floor nozzle to the wand or pod.
Install filters: Ensure both the pre-motor and HEPA filters are correctly seated.
Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in the vacuum; select the appropriate cleaning mode.

Select floor type: Use the Carpet/Hard Floor selector on the floor nozzle.
Power on: Press the power button on the main body.
Use Lift-Away mode: Press the release button to detach the pod for above-floor cleaning.
Attach tools: Connect desired tools to the hose end for detailed cleaning.
Adjust suction: Use the suction control slider on the hose handle if equipped.

CAUTION! Keep hair, loose clothing, and fingers away from the brushroll. Do not vacuum large objects.

Specifications

Model Series: LA300C.
Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
Power Cord: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Attachments: Motorized floor nozzle, wide upholstery tool, crevice tool, dusting brush, pet power brush.
Cleaning Modes: Upright, Lift-Away portable, above-floor with tools.
Filters: Pre-motor foam filter, post-motor HEPA filter.
Power Source: 120V AC, 60Hz.
Weight: Approximately 14 lbs.

Controls and Settings

Main Body: Power ON/OFF button, Lift-Away release button, suction release (if equipped). Floor Nozzle: Carpet/Hard Floor selector switch, brushroll ON/OFF (if equipped).

Hose Handle: Suction control slider, tool release button.

Operation: Select upright mode for floors; press Lift-Away release to detach pod for stairs, furniture, and tight spaces. Use tool buttons to switch attachments quickly. The power cord wrap hooks are located on the rear of the vacuum.

Cleaning Modes & Attachments

Upright Mode: For carpets and large floor areas. Lift-Away Mode: Detach pod for portable cleaning.

Motorized Floor Nozzle: For carpets; turn brushroll OFF for delicate rugs.
Wide Upholstery Tool: Attach to hose for furniture and stairs.
Crevice Tool: For corners, edges, and tight spaces.
Dusting Brush: For blinds, shelves, and electronics.
Pet Power Brush: Connect to hose for pet hair removal on fabric.

Tip: Clear the area of small objects before vacuuming to prevent clogs.

Emptying the Dust Cup

Empty the dust cup when it reaches the MAX fill line.

Turn off and unplug the vacuum.
Press the dust cup release button and lift the cup away.
Hold over a trash can; press the bottom release latch to open the door.
Tap gently to remove debris. For stuck debris, use a soft brush.
Close the door securely and reattach the dust cup until it clicks.

WARNING! Do not operate with a full dust cup. Empty after each use for optimal performance.

Filter Maintenance

Clean filters regularly to maintain suction and air quality.

Pre-motor foam filter: Rinse under cold water every month. Air dry for 24 hours before reinstalling.
HEPA filter: Tap gently to remove dust every 3 months. Replace every 12-18 months.
Check filter compartment for debris; ensure seals are clean and intact.

CAUTION! Never operate the vacuum without filters. Ensure filters are completely dry before reinstallation.

Care & Storage

Unplug before cleaning or maintenance. Wipe exterior with a dry cloth. Store in a cool, dry place.

CAUTION! Do not use liquids or cleaners on the vacuum. Keep away from heat sources and water.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clog, dirty filters	Empty dust cup; check hose and nozzle for clogs; clean or replace filters.
Brushroll not spinning	Obstruction, belt issue	Unplug and clear debris from brushroll; inspect belt for wear.
Vacuum won't turn on	Power source, internal fault	Check outlet and power cord; ensure unit is plugged in securely.
Overheating	Clogged filters, full dust cup	Allow to cool; clean filters and empty dust cup; check for blockages.
Lift-Away pod not detaching	Release button stuck, misalignment	Press release firmly; ensure pod is correctly seated; check for obstructions.

Reset: Unplug for 60 minutes if unit overheats.

Service: 1-800-798-7398; sharkclean.com