Shark Navigator DLX NV70 26 Vacuum Cleaner Manual

The Shark Navigator DLX NV70 26 is a lightweight, upright vacuum cleaner featuring a Lift-Away pod for portable cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, a motorized brushroll for carpets, a wide upholstery tool, a dusting brush, and a crevice tool. It includes a 26-foot power cord, swivel steering for maneuverability, and a large capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with handle, Lift-Away pod, Motorized brushroll, HEPA filter, Dust cup, Hose, Wand, and accessory tools.

Assembly & Setup

Unpack all parts from the box. Ensure all components are present.

1. Attach the Handle: Insert the handle into the top of the upright body until it clicks into place.
2. Install the Hose: Connect the hose end to the port on the front of the vacuum body.
3. Attach the Wand: Insert the wand into the hose grip until secure.
4. Attach Floor Nozzle: Slide the floor nozzle onto the bottom of the upright body until it locks.
5. Install Filters: Place the pre-motor foam filter and post-motor HEPA filter into their respective compartments.
6. Plug in the power cord.

WARNING! Ensure the vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Before first use, perform a quick test to ensure proper assembly.

1. Power On: Plug in the vacuum and press the power foot switch on the floor nozzle.
2. Select Mode: For floor cleaning, use the upright mode. For above-floor cleaning, press the Lift-Away release button to detach the pod.
3. Adjust Height: Use the carpet height selector on the floor nozzle (for carpets or bare floors).
4. Test Attachments: Attach the desired tool to the wand or hose end and test suction.

CAUTION! Keep hair, loose clothing, and fingers away from the brushroll intake.

Specifications

• Model: Shark Navigator DLX NV70 26.
• Type: Upright vacuum with Lift-Away pod.
• Cord Length: 26 feet.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Dust Cup Capacity: 1.5 dry quarts.
• Brushroll: Motorized, self-cleaning.
• Attachments Included: Wide upholstery tool, dusting brush, crevice tool.
• Power Source: 120V AC, 60Hz.
• Weight: Approximately 14 lbs.
• Warranty: 5-year limited warranty.

Controls and Parts

Main Controls: Power foot switch, Carpet height selector, Brushroll on/off switch, Lift-Away release button, Dust cup release button.

Key Parts: Handle with controls, Upright body, Lift-Away pod, Hose, Wand, Floor nozzle with motorized brushroll, HEPA filter compartment, Pre-motor foam filter, On-board tool holders.

Operation: Use the power foot switch to turn on/off. Use the brushroll on/off switch for hard floors. Press the Lift-Away button to detach the pod for stairs and furniture.

Cleaning Modes

Upright Mode: For cleaning carpets and bare floors. Lift-Away Mode: Detach the pod for portable cleaning of stairs, upholstery, and under furniture.

1. For Floors: Ensure the vacuum is in upright mode. Select appropriate carpet height.
2. For Above-Floor: Press the Lift-Away release button. Carry the pod and use the hose and wand with attachments.
3. Tool Use: Attach the desired tool (upholstery, brush, crevice) to the wand or hose end.

Tip: Turn off the brushroll when cleaning hard floors to prevent scattering debris.

Maintenance & Emptying

Regular maintenance ensures optimal performance.

1. Empty Dust Cup: Press the dust cup release button and remove. Empty contents into trash. Reinstall until it clicks.
2. Clean Filters: Remove and rinse the pre-motor foam filter under cold water every month. Let air dry for 24 hours before reinstalling.
3. Check HEPA Filter: Replace the HEPA filter every 12-18 months or as needed.
4. Clear Brushroll: Turn off and unplug the vacuum. Use a coin or scissors to remove hair and fibers wrapped around the brushroll.
5. Inspect Hose and Wand: Check for clogs and clear if necessary.

WARNING! Always unplug the vacuum before performing any maintenance. Do not operate with wet filters.

Attachments & Tools

Wide Upholstery Tool: For furniture and auto interiors. Dusting Brush: For delicate surfaces. Crevice Tool: For corners and tight spaces.

Storage: All tools clip onto the on-board holders on the vacuum body and wand for convenient access.

Care & Storage

Unplug before storing. Wind the power cord around the cord hooks. Store in a cool, dry place. Ensure the dust cup is empty and filters are dry.

CAUTION! Do not store near heat sources or with a wet dust cup or filters.

Regulatory Information

This appliance complies with FCC Part 15. Copyright © SharkNinja Operating LLC. Shark and Navigator are registered trademarks. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com