Shark Navigator Deluxe NV42 Series Vacuum Cleaner Manual

The Shark Navigator Deluxe NV42 Series is an upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, a HEPA filter, motorized brushroll, swivel steering, and multiple cleaning modes. It is designed for deep cleaning carpets, bare floors, and above-floor surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Filter Care 8. Emptying the Dust Cup 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lift-Away pod, motorized brushroll, HEPA filter, dust cup, hose, wand, and cleaning attachments.

FeatureDescription
Lift-Away TechnologyDetachable pod for portable above-floor cleaning
Anti-Allergen Complete SealTraps dust and allergens inside the vacuum
HEPA FilterCaptures 99.9% of dust and allergens
Motorized BrushrollDeep cleans carpets and agitates debris
Swivel SteeringManeuvers easily around furniture
Cleaning ModesCarpet, Bare Floor, and Lift-Away modes
Dust CupEasy-empty, bagless container
AttachmentsCreVice tool, pet multi-tool, dusting brush
Power SwitchTurns vacuum on/off
Brushroll On/OffDisengages brushroll for bare floors

Assembly & Setup

Unpack and inspect contents. Assemble according to instructions.

  1. Attach wand: Insert wand into vacuum body until it clicks.
  2. Connect hose: Attach hose to wand and vacuum pod.
  3. Install filter: Place HEPA filter into filter compartment.
  4. Attach floor nozzle: Connect floor nozzle to wand or pod.
  5. Plug into AC power.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from brushroll.

First-Time Use

Before first use, ensure assembly is complete and filter is installed.

  1. Select cleaning mode: Choose Carpet, Bare Floor, or Lift-Away mode.
  2. Adjust height setting: Use dial on floor nozzle for carpet pile.
  3. Turn on: Press power switch; engage brushroll if needed.
  4. Begin cleaning: Push vacuum forward and back slowly.
  5. Empty dust cup when full indicator appears.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

Controls and Settings

Main controls located on vacuum body and handle.

On-Body: Power switch, brushroll on/off button, Lift-Away release button, height adjustment dial.

Handle: Hose release button, wand release button.

Cleaning Modes: Upright (carpet/bare floor), Lift-Away (portable pod). Height Settings: Adjust dial for low, medium, high pile carpets. Brushroll Control: Turn off for bare floors or delicate rugs.

Cleaning Modes & Attachments

Use appropriate mode and attachment for each surface.

  1. Upright Mode: For carpets and large floor areas.
  2. Lift-Away Mode: Detach pod for stairs, furniture, and above-floor cleaning.
  3. Attachments: Connect to hose end for specific tasks:
    • CreVice Tool: Tight spaces, corners.
    • Pet Multi-Tool: Pet hair on furniture.
    • Dusting Brush: Shelves, blinds.
    • Upholstery Tool: Couches, curtains.

Tip: Turn off brushroll when using attachments on bare floors.

Maintenance & Filter Care

Regular maintenance ensures optimal performance.

  1. Clean filters monthly: Remove HEPA and foam filters; rinse with water; air dry 24 hours.
  2. Check brushroll: Remove debris (hair, strings) from brushroll regularly.
  3. Inspect hose and wand: Clear clogs if suction decreases.
  4. Replace HEPA filter every 12-18 months (or as needed).

WARNING! Always unplug vacuum before maintenance. Do not operate with wet filters.

Emptying the Dust Cup

Empty dust cup when full or after each use.

  1. Turn off and unplug vacuum.
  2. Press dust cup release button; remove cup.
  3. Hold over trash; press bottom latch to open door.
  4. Shake gently to empty contents.
  5. Close door; reattach dust cup until it clicks.

CAUTION! Empty dust cup outdoors or in well-ventilated area to minimize dust exposure.

Care & Storage

Unplug before cleaning. Wipe exterior with dry cloth; store in dry area.

CAUTION! Do not store with wet filters. Keep cord wrapped loosely.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Loss of suctionFull dust cup/clogEmpty dust cup; check hose, wand, and nozzle for clogs.
Brushroll not spinningDebris/overheatClear brushroll of debris; let motor cool 60 minutes.
Vacuum won't turn onPower/switchCheck outlet and power cord; ensure switch is on.
Dust escapingFilter not sealedEnsure filters are clean and properly installed.
Unusual noiseObstructionTurn off; check for blockages in hose, wand, or nozzle.

Reset: Unplug for 60 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com

Shark Navigator Deluxe NV42 Series Vacuum Cleaner Manual © - All Rights Reserved 2025