Shark Navigator DELUXE NV41 Vacuum Cleaner Manual

The Shark Navigator DELUXE NV41 is an upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal technology with a HEPA filter, a motorized brushroll for carpets and hard floors, swivel steering for maneuverability, a large-capacity dust cup, and multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with Lift-Away pod, motorized brushroll, swivel steering, dust cup with HEPA filter, hose, wand, and cleaning attachments.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach the handle: Insert handle into upright body until it clicks into place.
2. Connect the hose: Attach hose to the designated port on the vacuum body.
3. Install the wand: Insert wand into the hose cuff until secure.
4. Attach cleaning tools: Store tools on the onboard caddy or attach as needed.
5. Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before operation. Keep fingers away from brushroll during assembly.

First-Time Use

Before cleaning, perform a quick check and setup.

1. Inspect filter: Ensure HEPA filter is properly seated in the dust cup.
2. Check brushroll: Remove any packaging or debris from the brushroll area.
3. Select floor setting: Adjust height dial based on floor surface (low for hard floors, higher for carpets).
4. Power on: Press the power switch; the brushroll will engage automatically on carpet mode.
5. Test Lift-Away: Press the release button to detach the pod for handheld cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Ensure dust cup is empty before first use.

Specifications

• Model: Shark Navigator DELUXE NV41.
• Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
• Floor Types: Carpets, hard floors, low-pile rugs.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Dust Cup Capacity: 1.2 dry quarts.
• Cord Length: 25 feet.
• Power Source: 120V AC, 60Hz.
• Weight: 12.5 lbs.
• Warranty: Limited 5-year warranty (see manual for details).

Controls and Components

Main controls located on handle and body. Handle: Power switch, brushroll on/off button. Body: Height adjustment dial, Lift-Away release button, wand release, dust cup release.

Attachments: Crevice tool (for tight spaces), dusting brush (for shelves and blinds), upholstery tool (for furniture).

Settings: Height adjustment (multiple settings), brushroll on/off (for hard floors or delicate rugs), power (on/off). Maintenance: Dust cup empty indicator, filter access door, brushroll cleaning tool included.

Using the Vacuum

For upright cleaning: Ensure vacuum is in locked upright position. For Lift-Away mode: Press release button to detach pod.

1. Select floor type: Adjust height dial accordingly.
2. Turn on: Press power switch; green light indicates operation.
3. Vacuum forward and back slowly for best carpet agitation.
4. Use hose and wand: Detach pod, attach desired tool for above-floor cleaning.
5. Turn off and unplug after use.

Tip: Empty dust cup when it reaches the MAX fill line to maintain suction.

Cleaning Modes & Attachments

Supports upright, Lift-Away handheld, and above-floor cleaning with tools.

1. Upright mode: For carpets and large floor areas.
2. Lift-Away mode: Detach pod to clean stairs, under furniture, and other hard-to-reach areas.
3. Crevice tool: For corners, edges, and between cushions.
4. Dusting brush: For delicate surfaces like lampshades, keyboards, and blinds.
5. Upholstery tool: For sofas, chairs, and car interiors.
6. Brushroll on/off: Turn off for hard floors or delicate rugs to prevent scattering debris.

WARNING! Do not use attachments to vacuum liquids or sharp objects. Keep hair and strings away from brushroll.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty dust cup: Press release button; empty contents into trash; reinstall.
2. Clean filters: Rinse HEPA filter and pre-motor filter with cold water every month; air dry completely for 24 hours before reinstalling.
3. Clear brushroll: Use cleaning tool to remove hair and fibers; check monthly.
4. Inspect hose and attachments: Remove clogs with a long, flexible object.
5. Store properly: Wrap cord around cord hooks; store in a dry place.

CAUTION! Always unplug vacuum before maintenance. Do not operate with wet filters.

Regulatory Information

This vacuum cleaner complies with FCC Part 15 Subpart B for Class B digital devices. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds if motor overheats; check and clear all blockages.

Service: 1-800-798-7398; sharkclean.com