Shark MESSMASTER VS105QBI Vacuum Cleaner Manual

The Shark MESSMASTER VS105QBI is a powerful upright vacuum cleaner designed for deep cleaning carpets and hard floors. It features a DuoClean PowerFins brushroll, Anti-Allergen Complete Seal technology, LED headlights, a large-capacity dust cup, and multiple cleaning modes. This manual covers safety instructions, assembly, operation, maintenance, troubleshooting, and specifications to ensure optimal performance and longevity of your vacuum.

Features at a Glance

Key components: Main vacuum body with motor, DuoClean PowerFins brushroll, Handle with controls, Large-capacity dust cup, Anti-Allergen Complete Seal filtration system, LED headlights, and various attachments.

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat, stable surface.

1. Attach the handle: Align handle with main body and push until it clicks into place.
2. Install the dust cup: Ensure it is securely locked into position.
3. Attach the hose and wand: Connect to the front of the vacuum until they click.
4. Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed correctly and the dust cup is empty.

1. Select cleaning mode: Use mode selector to choose CARPET, HARD FLOOR, or BOOST.
2. Adjust height: The vacuum auto-adjusts to most carpet heights.
3. Begin cleaning: Press power switch and push vacuum forward and back in slow, overlapping strokes.
4. Use attachments: For above-floor cleaning, detach wand and attach desired tool.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark MESSMASTER VS105QBI.
• Power Source: 120V AC, 60Hz.
• Motor: High-efficiency, sealed system.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 25 feet.
• Weight: 15 lbs.
• Warranty: 5-year limited warranty.
• Operating Temp: 40°F to 104°F (4°C to 40°C).

Controls and Settings

Main controls located on handle and body. Handle: Power switch, Mode selector (Carpet/Hard Floor/Boost), Handle release button. Body: Dust cup release, Brushroll access latch, Cord wrap hooks.

LED Indicators: Power ON (blue), Boost mode (red), Filter check (amber).

Settings: Carpet mode (default for medium pile), Hard Floor mode (reduces suction for debris pickup), Boost mode (maximum suction for deep cleaning).

Cleaning Modes & Attachments

Use appropriate mode for surface type. Attachments for specialized cleaning.

1. Carpet Mode: For carpets and rugs; brushroll spins at standard speed.
2. Hard Floor Mode: For tile, wood, laminate; brushroll slows to prevent scattering debris.
3. Boost Mode: For high-traffic areas or deep-cleaning needs; increases suction power.
4. Attachments: Crevice tool (tight spaces), dusting brush (surfaces), upholstery tool (furniture).

Tip: Always turn off vacuum before switching modes or attaching tools.

Maintenance & Care

Regular maintenance ensures peak performance and extends vacuum life.

1. Check brushroll monthly: Remove hair and debris wrapped around brushroll.
2. Inspect hose and wand: Clear any blockages.
3. Wipe exterior: Use dry cloth to clean body and handle.
4. Store properly: Wrap cord, store in dry area away from heat sources.

WARNING! Unplug vacuum before performing any maintenance. Do not use water on electrical parts.

Emptying the Dust Cup

Empty dust cup when full or after each use for best suction.

1. Turn off and unplug vacuum.
2. Press dust cup release button and remove cup.
3. Hold over trash can; press bottom release to open door and empty debris.
4. Close door securely and reattach dust cup until it clicks.

CAUTION! Empty dust cup outdoors if possible to minimize dust exposure. Do not overfill.

Filter Cleaning & Replacement

Filters should be cleaned every 3 months and replaced annually for optimal performance.

To clean foam and felt filters: Rinse under cold water until water runs clear. Air dry completely (24 hours) before reinstalling. HEPA filter: Tap gently to remove dust; do not wash. Replace if damaged or excessively dirty.

Note: Vacuum will not operate properly if filters are wet or incorrectly installed.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product is covered by a 5-year limited warranty. Refer to warranty card for details.

Troubleshooting

Reset: Unplug vacuum for 30 minutes if motor overheats; plug back in.

Service: 1-800-798-7398; www.sharkclean.com