Shark MESSMASTER VS100 Series Vacuum Cleaner Manual

The Shark MESSMASTER VS100 Series is a powerful, versatile vacuum cleaner designed for tackling tough household messes. It features a high-efficiency motor, multi-surface brushroll, advanced filtration system, lift-away canister mode, and various attachments for above-floor cleaning. This manual covers safety instructions, key features, assembly, operation, maintenance, troubleshooting, and warranty information to ensure optimal performance and longevity of your vacuum.

Features at a Glance

Key components: Motorized floor nozzle, Lift-away canister, HEPA filter, Dust cup, Handle with controls, Crevice tool, Upholstery tool, Dusting brush.

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat, stable surface.

1. Attach the handle: Insert handle into the top of the vacuum body until it clicks securely.
2. Connect the wand: Insert the wand into the floor nozzle and then into the vacuum body.
3. Install the floor nozzle: Align the nozzle with the wand connector and push until it locks.
4. Attach the hose: Connect the hose to the port on the front of the vacuum.
5. Store attachments: Place crevice tool, upholstery tool, and dusting brush in the onboard caddy.

WARNING! Ensure all parts are securely connected before use to prevent injury or damage. Keep fingers clear of moving parts during assembly.

First-Time Use

Plug the power cord into a standard 120V AC outlet. Ensure the dust cup is empty and filters are installed.

1. Select floor setting: Use the brushroll switch to select "Carpet" or "Hard Floor" as needed.
2. Adjust suction: For delicate rugs or drapes, lower the suction power using the control dial.
3. Begin vacuuming: Press the power button and push the vacuum forward in slow, overlapping strokes.
4. Use lift-away mode: Step on the wand release pedal to detach the canister for stairs or furniture.
5. Empty dust cup: Press the release button to remove and empty the dust cup when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep the vacuum away from hair, cords, and loose clothing to avoid entanglement.

Specifications

• Model Series: VS100 Series.
• Power Source: 120V AC, 60Hz.
• Motor: High-efficiency, sealed system.
• Filtration: HEPA filter, washable foam filter.
• Dust Cup Capacity: 1.2 dry quarts.
• Cord Length: 25 feet.
• Attachments Included: Crevice tool, Upholstery tool, Dusting brush.
• Weight: 14.5 lbs (assembled).
• Warranty: 5-year limited warranty (see manual for details).

Controls and Settings

Main controls located on the handle and body. Handle: Power button, Suction control dial. Body: Brushroll on/off switch, Wand release pedal, Dust cup release button.

Settings Overview: Power: On/Off toggle. Suction Control: Adjustable from MIN to MAX. Brushroll Switch: ON for carpets, OFF for hard floors/delicate rugs. Lift-Away Mode: Activated via wand release pedal for portable cleaning.

Indicator Lights: Filter check light (if equipped) alerts when filters need cleaning. Cord wrap: Use hooks on rear of vacuum to store power cord.

Using Attachments

Attach tools to the hose end for above-floor cleaning.

1. Detach the hose from the vacuum body if in upright mode.
2. Select tool: Crevice tool for tight spaces; Upholstery tool for furniture; Dusting brush for surfaces.
3. Connect tool: Push firmly onto the end of the hose or extension wand.
4. Turn on vacuum and clean as needed.
5. Return tools to onboard caddy after use.

Tip: For high-reach areas, attach the tool to the extension wand. Ensure the vacuum is turned off when changing attachments.

Maintenance & Cleaning

Regular maintenance ensures peak performance and extends vacuum life.

1. Empty dust cup: After each use or when full. Press release button, remove, and empty into trash.
2. Clean filters: Remove HEPA and foam filters monthly (or as needed). Rinse with cold water and air dry completely for 24 hours before reinstalling.
3. Clear brushroll: Regularly remove hair and debris wrapped around the brushroll. Use scissors if necessary.
4. Check for clogs: If suction decreases, inspect hose, wand, and nozzle for blockages.
5. Inspect belt: If brushroll does not spin, check belt for wear and replace if damaged.

WARNING! Always unplug vacuum before performing any maintenance. Do not use damaged belts or filters. Ensure all parts are completely dry before reassembly.

Storage & Care

Store in a cool, dry place. Wrap cord around cord hooks. Empty dust cup and clean filters before long-term storage.

CAUTION! Do not store vacuum with a wet dust cup or damp filters to prevent mold and odors. Keep away from heat sources and direct sunlight.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. Shark, MESSMASTER, and associated designs are trademarks of SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug vacuum for 60 minutes to reset thermal protector if overheated.

Service: 1-800-798-7398; www.sharkclean.com. Do not attempt to repair motor yourself.