Shark LV801C Vacuum Cleaner Manual

The Shark LV801C is a versatile upright vacuum cleaner featuring powerful suction, a Lift-Away canister design, Anti-Allergen Complete Seal Technology with HEPA filter, motorized brushroll for carpets and hard floors, swivel steering for maneuverability, multiple cleaning modes, and a variety of attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum body, Lift-Away canister, motorized brushroll, swivel steering, HEPA filter, dust cup, hose, and accessory tools.

Feature	Description
Lift-Away Design	Detachable canister for portable above-floor cleaning
Anti-Allergen Complete Seal	Sealed system with HEPA filter traps 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and automatically adjusts for hard floors
Swivel Steering	Enhanced maneuverability around furniture and obstacles
Cleaning Modes	Upright, Lift-Away, and handheld modes
Accessory Storage	On-board storage for crevice tool, dusting brush, and upholstery tool
Dust Cup	Large capacity, easy-empty container
Power Cord	25-foot cord with cord wrap
Washable Filters	HEPA and pre-motor filters are washable for maintenance
LED Headlights	Illuminates dark areas under furniture

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Insert handle into upright body until it clicks into place.
Install hose: Connect hose to the vacuum body and canister ports.
Attach wand: Insert wand into hose grip until secure.
Install accessories: Store tools on-board or attach as needed.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Before cleaning, perform initial setup and check functions.

Check filters: Ensure HEPA and pre-motor filters are properly installed.
Empty dust cup: Ensure dust cup is empty before use.
Select mode: Choose upright or Lift-Away mode based on cleaning needs.
Adjust height: Set brushroll height appropriate for floor type (carpet/hard floor).
Test suction and brushroll: Turn on to confirm normal operation.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: Shark LV801C.
Type: Upright vacuum with Lift-Away canister.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Brushroll: Motorized, auto-adjusting for carpets/hard floors.
Cord Length: 25 feet.
Dust Cup Capacity: 1.5 dry quarts.
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Weight: Approximately 14 lbs.
Warranty: Limited 5-year warranty.

Controls and Settings

Main controls located on handle and body.

Handle Controls: Power switch, brushroll on/off, mode selector (upright/Lift-Away).

Settings: Brushroll height adjustment (carpet/hard floor), suction power control (if applicable), LED headlight switch. Use mode selector to switch between upright vacuuming and portable Lift-Away cleaning. Brushroll can be turned off for delicate surface cleaning.

Using Attachments

Attachments enhance cleaning versatility for above-floor areas.

Detach canister: Press release button to separate canister from upright body.
Connect tools: Attach desired tool (crevice, dusting brush, upholstery) to wand or hose end.
Select suction setting: Use appropriate suction power for attachment.
Clean: Use tool on upholstery, stairs, ceilings, and tight spaces.
Reattach: Return canister to upright body after use.

Tip: Store attachments on-board for quick access during cleaning.

Cleaning Modes

Three primary cleaning modes for different surfaces.

Upright Mode: For carpets and large floor areas. Use motorized brushroll for deep cleaning.
Lift-Away Mode: Detach canister for portable cleaning of stairs, furniture, and above-floor areas.
Handheld Mode: Use hose with attachments for spot cleaning and tight spaces.
Brushroll Control: Turn off brushroll for hard floors or delicate rugs.
Suction Control: Adjust if model includes variable suction settings.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty Dust Cup: Empty after each use or when full. Press release button to remove cup.

Clean Filters: Wash HEPA and pre-motor filters every 3 months (or as needed) with cold water. Air dry completely for 24 hours before reinstalling.

Clear Brushroll: Regularly remove hair and debris wrapped around brushroll. Use scissors or cleaning tool provided.

Check Hose and Attachments: Ensure no clogs in hose, wand, or tools.

Inspect Power Cord: Check for damage before each use.

CAUTION! Always unplug vacuum before maintenance. Do not operate with wet filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clog, dirty filters	Empty dust cup; check hose, wand, and tools for clogs; clean or replace filters.
Brushroll not spinning	Debris wrap, belt issue	Unplug and clear brushroll of debris; check belt for wear and replace if needed.
Vacuum won't turn on	Power cord, outlet, switch	Check power cord connection; test outlet; ensure power switch is on.
Canister not detaching	Release button stuck	Unplug, press release button firmly; check for obstructions.
Unusual noise	Foreign object in brushroll or hose	Unplug and inspect brushroll, hose, and attachments for blockages.

Reset: Unplug for 60 seconds, then restart if motor overheats.

Service: 1-800-798-7398; sharkclean.com