Shark LIFT-AWAY PRO Vacuum Cleaner Manual

The Shark LIFT-AWAY PRO is a versatile upright vacuum cleaner featuring Lift-Away technology for portable cleaning, powerful suction with Anti-Allergen Complete Seal, a motorized brushroll for carpets and hard floors, a large-capacity dust cup with HEPA filter, multiple cleaning modes (Floor, Lift-Away, Handheld), various attachments (crevice tool, dusting brush, pet multi-tool), and swivel steering for maneuverability. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized brushroll, dust cup with HEPA filter, handle with controls, hose, wand, and attachment set.

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat surface.

1. Attach the handle: Align handle with top of vacuum body and push until it clicks into place.
2. Install the wand: Insert wand into hose connector until secure.
3. Attach hose: Connect hose end to port on vacuum body; ensure tight fit.
4. Install floor nozzle: Align nozzle with vacuum base and press down until it locks.
5. Plug into standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Before first use, ensure all parts are properly assembled and filters are installed.

1. Check filters: Ensure HEPA filter and pre-motor filter are correctly seated.
2. Select mode: Use mode selector switch to choose Floor mode for carpets/hard floors.
3. Adjust suction: Use power/suction slider on handle for desired suction level.
4. Begin cleaning: Press power button on handle; vacuum will start.
5. Empty dust cup after first use to ensure optimal performance.

CAUTION! Do not vacuum wet surfaces, large debris, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark LIFT-AWAY PRO.
• Power Source: 120V AC, 60Hz.
• Suction Power: Adjustable via power slider.
• Cord Length: 25 feet retractable.
• Dust Cup Capacity: 1.5 dry quarts.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Brushroll: Motorized, self-adjusting for carpets/hard floors.
• Attachments: Crevice tool, dusting brush, pet multi-tool, upholstery tool.
• Weight: 14.5 lbs (assembled).
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and vacuum body. Handle: Power button, suction slider, wand release button. Vacuum body: Mode selector (Floor/Lift-Away), brushroll on/off switch, dust cup release.

Settings Overview: Power: On/Off button. Suction Control: Slider for low/medium/high suction. Mode Selector: Switch between Floor mode (attached) and Lift-Away mode (detached). Brushroll Control: On/Off switch for motorized brushroll (in Floor mode). Filter Access: Button to remove dust cup and access filters.

Using Cleaning Modes

Three primary cleaning modes: Floor, Lift-Away, and Handheld.

1. Floor Mode: For carpets and hard floors. Ensure brushroll is on for carpets; turn off for hard floors to prevent scattering debris.
2. Lift-Away Mode: Press release button on back to detach pod; use hose and wand for above-floor cleaning (stairs, furniture).
3. Handheld Mode: Detach pod and remove wand; use with attachments for tight spaces, upholstery, or car interiors.

Tip: Use suction slider to reduce suction for delicate fabrics in Handheld mode.

Using Attachments

Attachments store on vacuum body or wand. To use:

1. Ensure vacuum is in Lift-Away or Handheld mode.
2. Press wand release button to remove wand if needed.
3. Select attachment and push onto end of hose or wand until it clicks.
4. Common uses: Crevice tool (tight spaces), dusting brush (surfaces, blinds), pet multi-tool (hair removal), upholstery tool (furniture).

WARNING! Do not use attachments to vacuum liquids or sharp objects. Always turn off vacuum before changing attachments.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Empty Dust Cup: Press release button; empty contents into trash; reinstall until click.
2. Clean Filters: Remove HEPA and pre-motor filters monthly; rinse with cold water and air dry completely (24 hours) before reinstalling.
3. Clear Brushroll: Turn off and unplug; remove nozzle; cut away wrapped hair/debris with scissors.
4. Check Hose/Nozzle for Clogs: Detach and inspect if suction is weak; clear any blockages.
5. Exterior Cleaning: Wipe with dry cloth; do not use liquids on electrical parts.

CAUTION! Always unplug vacuum before maintenance. Ensure filters are completely dry before use to prevent motor damage.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a 5-year limited warranty. Proper disposal: Do not dispose with household waste; recycle according to local regulations.

Troubleshooting

Reset: Unplug for 30 minutes if overheating occurs; plug back in.

Service: 1-800-798-7398; sharkclean.com