Shark Lift-Away NV601UK Series Vacuum Cleaner Manual

The Shark Lift-Away NV601UK Series is a versatile upright vacuum cleaner featuring Lift-Away technology for portable cleaning, Anti-Allergen Complete Seal Technology with a HEPA filter, powered floor nozzle for carpets and hard floors, LED headlights, multiple cleaning modes, and a range of attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, powered floor nozzle, wand, hose, and accessory kit.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	HEPA filter traps 99.9% of dust and allergens
Powered Floor Nozzle	Motorized brush roll for carpets and hard floors
LED Headlights	Illuminates dark areas under furniture
Cleaning Modes	Upright, Lift-Away, Handheld
Accessory Storage	Crevice tool, dusting brush, upholstery tool stored on board
Dust Cup Release	Easy-empty dust cup with one-touch release
Brush Roll Control	On/Off switch for hard floors vs carpets
Wand Release	Quick-release button for adjusting wand length
Power Cord	Long cord with cord wrap hooks

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

Attach wand to vacuum body: Insert wand into socket until it clicks.
Connect hose: Attach hose end to port on vacuum body.
Attach floor nozzle: Align nozzle with wand base and push until secured.
Install filters: Place HEPA filter and pre-motor filter as indicated.
Plug into AC power.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all filters are installed and dust cup is empty.

Select cleaning mode: Choose Upright for floors or Lift-Away for above-floor cleaning.
Adjust brush roll: Turn ON for carpets, OFF for hard floors.
Power on: Press foot pedal or power button.
Begin cleaning: Push vacuum forward on floor surface.
Use attachments: Detach wand or hose for tools as needed.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

Model: NV601UK Series.
Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
Power Source: 220-240V AC, 50Hz.
Cord Length: 8 meters.
Dust Cup Capacity: 1.5 liters.
Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
Cleaning Modes: Upright, Lift-Away, Handheld.
Warranty: 5-year limited warranty (UK).
Weight: 6.8 kg (assembled).

Controls and Settings

Main controls located on vacuum body and handle.

On-Body Controls: Power switch/foot pedal, Brush Roll On/Off, Lift-Away release button, Dust Cup release.

Handle Controls: Power trigger (Lift-Away mode), Suction control slider.

Settings: Upright mode (default), Lift-Away mode (detach pod), Handheld mode (remove wand and attach tool directly to hose). Brush roll setting: ON for carpets (agitates fibers), OFF for hard floors (suction only). Suction power: Adjust via slider on handle for delicate fabrics.

Using Attachments

Accessories stored on vacuum: Crevice tool, dusting brush, upholstery tool.

Detach hose or wand from vacuum.
Select attachment and insert into end of hose or wand.
Use for specific tasks: Crevice tool for tight spaces, dusting brush for shelves, upholstery tool for furniture.
Return attachment to storage clips after use.

Tip: For high reach, attach tool to wand extension for ceilings and curtains.

Cleaning Modes

Three primary modes for versatile cleaning.

Upright Mode: For floors. Vacuum remains intact; push across floor.
Lift-Away Mode: Press release button to detach pod; carry for stairs, furniture, and above-floor cleaning.
Handheld Mode: Remove wand; attach hose directly to tool for spot cleaning.

WARNING! Always turn off and unplug before switching modes or removing parts.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full or after each use.
Clean filters: Remove and tap HEPA filter monthly; wash pre-motor filter every 3 months (air dry completely).
Clear brush roll: Turn off and unplug; remove debris from brush roll regularly.
Check hose and wand: Remove blockages if suction reduces.

CAUTION! Do not use vacuum without filters installed. Ensure all parts are dry before reassembly.

Care & Storage

Unplug before storage. Store in a cool, dry place.

Wrap power cord around cord hooks. Ensure dust cup is empty and filters are clean. Store attachments on board. Avoid storing in damp areas.

CAUTION! Do not store with wet filters; avoid extreme temperatures.

Regulatory Information

Complies with UK/EU safety standards. Waste Electrical and Electronic Equipment (WEEE) directive: Do not dispose with household waste; recycle appropriately. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.co.uk or contact 0800 862 0453.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; check and clean filters; clear hose/wand blockages.
Brush roll not spinning	Obstruction, belt issue, mode setting	Turn off and clear debris; ensure brush roll is ON for carpets; check belt if accessible.
Vacuum won't turn on	Power source, cord, switch	Check plug socket; inspect cord for damage; ensure power switch is engaged.
Lift-Away pod not detaching	Release button not fully pressed	Press release button firmly while lifting pod away from floor nozzle.
Overheating or smell	Blockage, full filters	Turn off and unplug; let cool; check for clogs; clean filters.

Reset: Turn off, unplug for 60 minutes, then restart.

Service: 0800 862 0453; www.sharkclean.co.uk