Shark LIFT-AWAY NV590UK Series Vacuum Cleaner Manual

The Shark LIFT-AWAY NV590UK Series is a versatile upright vacuum cleaner featuring Lift-Away technology for portable deep cleaning, Anti-Allergen Complete Seal technology with a HEPA filter, motorized brushroll for carpets and hard floors, multiple cleaning modes (floor, above-floor, handheld), large dust cup capacity, swivel steering for maneuverability, and various attachments (crevice tool, dusting brush, pet multi-tool). Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized floor nozzle, wand, handle with controls, dust cup with HEPA filter, and accessory set.

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

1. Attach the wand: Insert the wand into the socket on the vacuum body until it clicks.
2. Attach the handle: Slide the handle onto the top of the wand and press down until secure.
3. Connect the hose: Attach the hose end to the port on the vacuum body.
4. Install the floor nozzle: Align the nozzle with the wand connector and push until it clicks into place.
5. Insert filters: Ensure both the pre-motor and HEPA filters are correctly installed in the dust cup.

WARNING! Ensure the vacuum is unplugged during assembly. Check all connections are secure before first use.

First-Time Use

Plug the vacuum into a standard electrical outlet. Select the appropriate cleaning mode.

1. Select floor surface: Use the Power/Surface switch to select CARPET or HARD FLOOR.
2. Turn on: Press the power button on the handle.
3. Engage brushroll: Ensure the brushroll is ON for carpets; can be turned OFF for delicate rugs.
4. Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.
5. Use Lift-Away mode: Press the release button to detach the pod for stairs or above-floor cleaning.

CAUTION! Keep hair, loose clothing, fingers, and feet away from openings and moving parts.

Specifications

• Model Series: NV590UK.
• Technology: Lift-Away, Anti-Allergen Complete Seal with HEPA filter.
• Power Source: 220-240V AC, 50-60Hz.
• Cord Length: Approx. 7.5 meters.
• Dust Cup Capacity: 1.2 Litres.
• Cleaning Modes: Floor, Above-floor, Handheld.
• Attachments: Crevice tool, dusting brush, pet multi-tool, upholstery tool.
• Filtration: Pre-motor foam filter & post-motor HEPA filter.
• Warranty: 5-year limited warranty (subject to registration).

Controls and Modes

Main controls located on the handle and vacuum body.

Handle: Power button, Brushroll on/off button. Body: Power/Surface switch (Carpet/Hard Floor), Wand release pedal, Hose release button, Lift-Away release button.

Cleaning Modes:
Floor Mode: Full vacuum assembly for carpets and hard floors.
Above-Floor Mode: Detach wand and use with desired attachment for furniture, curtains, etc.
Handheld Mode: Detach Lift-Away pod and use with hose and short nozzle for tight spaces, stairs, or cars.

Using Attachments

Attach tools to the wand or hose for specialized cleaning.

1. Ensure vacuum is off.
2. Detach wand or hose as needed for the cleaning task.
3. Press the accessory onto the end of the wand or hose until it clicks.
4. Turn on vacuum and begin cleaning.
5. Common uses: Crevice tool for edges and corners; Dusting brush for shelves and blinds; Pet Multi-Tool for pet hair on furniture; Upholstery tool for sofas and chairs.

Tip: For best suction, ensure attachments are clicked firmly into place and hose/wand is not kinked.

Cleaning & Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Check for blockages: Regularly inspect hose, wand, nozzle, and accessories for clogs.
2. Clean the brushroll: Remove hair and debris wrapped around the brushroll regularly. Press the tabs to release the brushroll cover for access.
3. Inspect belts: Periodically check the drive belt for wear or damage (consult manual for replacement).
4. Wipe exterior: Use a dry cloth to clean the vacuum body and attachments.

WARNING! Always unplug the vacuum before performing any maintenance or checking for blockages.

Emptying the Dust Cup

Empty the dust cup when it reaches the MAX fill line.

1. Turn off and unplug the vacuum.
2. Press the dust cup release button and lift the cup away from the vacuum body.
3. Hold the dust cup over a bin. Press the bottom release latch to open the door, allowing debris to fall out.
4. Close the door securely until it clicks.
5. Reattach the dust cup to the vacuum body, ensuring it clicks into place.

CAUTION! Empty dust cup outdoors or in a well-ventilated area if containing fine dust or allergens.

Filter Care

Clean filters regularly to maintain suction and filtration.

Pre-motor Foam Filter: Rinse under cold water every month. Squeeze out excess water and let air dry for 24 hours COMPLETELY before reinstalling.
HEPA Filter: Tap gently over a bin to remove dust every 1-3 months. Do not wash. Replace every 12-18 months or as needed.
Important: Never operate the vacuum without ALL filters installed and completely dry.

Regulatory Information

This appliance complies with relevant UK and EU safety and EMC directives. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check local regulations for disposal of electronic goods. Copyright © SharkNinja Operating LLC. Shark and Lift-Away are trademarks of SharkNinja Operating LLC. For support in the UK, visit www.sharkclean.co.uk or contact 0800 862 0453.

Troubleshooting

Reset: Unplug vacuum for 60 seconds, then plug back in.

Service: For UK: 0800 862 0453; www.sharkclean.co.uk