Shark Lift-Around NP319E Vacuum Cleaner Manual

The Shark Lift-Around NP319E is a versatile cordless stick vacuum cleaner featuring a detachable pod for portable, above-floor cleaning. It includes a motorized brush roll for carpets, a crevice tool, an upholstery tool, a wall-mount charging dock, and a HEPA filter. The vacuum offers multiple power modes, a LED headlight, and is designed for quick transitions between floor cleaning and handheld use. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motorized floor nozzle, Detachable handheld pod, Charging dock, Crevice tool, Upholstery tool, HEPA filter, LED headlight.

Assembly & Installation

Unpack and inspect all contents. Assemble for first use.

1. Attach the floor nozzle: Align the nozzle with the stick handle until it clicks into place.
2. Install the wall dock: Mount the charging dock on a wall using provided screws, ensuring it is near an outlet.
3. Charge the vacuum: Place the vacuum onto the dock; the indicator light will show charging status.
4. Attach tools: Store the crevice and upholstery tools on the dock or vacuum body as designed.

WARNING! Ensure the vacuum is powered OFF and not charging during assembly. Use caution when handling the motorized brush roll.

First-Time Setup

Fully charge before first use; familiarize yourself with controls.

1. Initial Charge: Place on dock; charge until indicator light turns solid (approx. 4 hours).
2. Power On: Press the power button; the vacuum will start in standard mode.
3. Select Mode: Press the power button again to cycle through power modes (Eco, Standard, Max).
4. Test Detachment: Press the release button to detach the pod for handheld use.
5. Test Tools: Attach the crevice or upholstery tool to the handheld pod.

CAUTION! Do not use the vacuum on wet surfaces or to pick up liquids, ashes, or large hard objects.

Specifications

• Model: Shark Lift-Around NP319E.
• Type: Cordless Stick Vacuum with Detachable Handheld.
• Battery: Rechargeable Lithium-Ion.
• Run Time: Up to 30 minutes (varies by power mode).
• Charging Time: Approximately 4 hours.
• Filtration: HEPA Filter.
• Dust Cup Capacity: 0.5 dry quarts.
• Attachments: Motorized floor nozzle, Crevice tool, Upholstery tool.
• Power Source: 120V AC charging dock.
• Weight: 7.5 lbs (approx.).

Controls and Settings

Main controls located on the handle. Power Button: Turns vacuum on/off and cycles through Eco (low power/long runtime), Standard (balanced), and Max (high power/short runtime) modes. Release Button: Detaches the pod. Dust Cup Release: Button to empty collected debris. LED Indicators: Show battery status (charging/low/full) and power mode.

Charging Dock: LED indicates charging (flashing) and full charge (solid).

To switch to handheld mode: Press the release button while holding the handle, lift the pod away from the stick. To reattach: Align the pod with the stick and push until it clicks.

Using Attachments

For above-floor cleaning, detach the pod and attach the desired tool.

1. Detach the pod: Press the release button on the handle.
2. Select tool: Choose crevice tool for edges and tight spaces; upholstery tool for furniture.
3. Attach tool: Press the tool onto the nozzle of the handheld pod until it clicks.
4. Clean: Turn on the pod using the same power button.
5. Store: Tools can be clicked onto the storage clips on the charging dock.

Tip: For best suction, ensure the filter and dust cup are empty before using attachments.

Cleaning Modes & Operation

Optimize cleaning based on surface and battery life.

1. Floor Cleaning: Use the full vacuum in stick mode. The motorized brush roll activates automatically on carpets.
2. Mode Selection: Press power button to cycle. Use Eco for hard floors and maintenance, Standard for carpets, Max for high-traffic areas.
3. Handheld Cleaning: Detach pod for stairs, furniture, car interiors, and ceilings.
4. LED Headlight: Automatically turns on when vacuum is powered, illuminating under furniture.
5. Recharging: Return vacuum to dock after use. Indicator flashes while charging, turns solid when full.

WARNING! Keep hair, loose clothing, fingers, and feet away from openings and the motorized brush roll.

Emptying the Dust Cup

Empty the dust cup after each use or when the full indicator appears.

1. Turn off and detach the vacuum from the dock.
2. Hold the dust cup over a trash can.
3. Press the dust cup release button; the bottom will open, releasing debris.
4. Close the dust cup door until it clicks shut.
5. For thorough cleaning, the filter can be removed and tapped clean (see Maintenance).

CAUTION! Empty dust cup into a sealed trash bag if cleaning allergens. Do not use water to clean the dust cup unless specified as washable.

Care & Maintenance

Regular maintenance ensures peak performance and longevity.

• Filter Cleaning: Remove and tap HEPA filter over trash every month. Rinse only if marked washable; air dry completely for 24 hours before reinserting.
• Brush Roll Care: Regularly remove hair and fibers wrapped around the brush roll. Use scissors to cut and remove debris.
• Exterior Cleaning: Wipe with a dry cloth. Do not use abrasive cleaners or immerse in water.
• Battery Care: For storage longer than a month, store with a 50% charge in a cool, dry place.
• Storage: Store on the charging dock to keep it charged and ready.

CAUTION! Always turn off and remove from charger before performing maintenance. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of their respective owners. Battery contains lithium-ion; dispose of according to local regulations. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: For electronic issues, remove from dock, hold power button for 10 seconds, then place back on dock.

Service: 1-800-798-7398; sharkclean.com