Shark LA700 Vacuum Cleaner Manual

The Shark LA700 is a powerful upright vacuum cleaner featuring advanced suction technology, a HEPA filtration system, multiple cleaning modes, LED headlights, a large-capacity dust cup, and various attachments for versatile cleaning. Designed for home use on carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with motorized brush roll, LED headlights, dust cup with HEPA filter, wand, hose, and accessory attachments.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach wand: Insert wand into upright body until it clicks.
2. Connect hose: Attach hose to wand and body ports.
3. Install filter: Place HEPA filter into dust cup compartment.
4. Attach tools: Store attachments on onboard caddy.
5. Plug into power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brush roll.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

1. Power on: Press foot pedal or power button.
2. Select mode: Use dial for hard floor, carpet, or max suction.
3. Adjust height: For carpets, set brush roll to appropriate height.
4. Begin cleaning: Push vacuum forward slowly for best results.
5. Empty dust cup: Press release button when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model: Shark LA700 Upright Vacuum.
• Power: 120V, 60Hz, 10A motor.
• Suction Power: Adjustable with multiple settings.
• Filtration: HEPA filter, washable pre-motor filter.
• Dust Cup Capacity: 1.5 liters.
• Cord Length: 25 feet.
• Weight: 12 lbs.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power button, suction control dial. Body: Brush roll on/off, dust cup release, wand release.

Settings: Suction dial (Low/Medium/High/Max), brush roll switch (On/Off), LED lights (auto-on).

Maintenance indicators: Filter check light (if equipped). Accessory storage: On-board caddy for tools.

Using Attachments

Convert to handheld for above-floor cleaning.

1. Remove wand: Press wand release button.
2. Attach tool: Connect desired tool to hose end.
3. Select suction: Adjust dial for appropriate power.
4. Clean: Use for upholstery, crevices, dusting.
5. Return to upright: Reattach wand until click.

Tip: Use dusting brush for delicate surfaces, crevice tool for tight spaces.

Cleaning Modes

Three primary modes for different surfaces.

1. Hard Floor Mode: Brush roll off, suction optimized for hard surfaces.
2. Carpet Mode: Brush roll on, adjusts height for carpet pile.
3. Max Suction Mode: Maximum power for deep cleaning or high-pile carpets.
4. Handheld Mode: For attachments and above-floor cleaning.

WARNING! Do not use hard floor mode on carpets; may cause damage.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: After each use or when full.
2. Clean filters: Wash HEPA and pre-motor filters monthly (air dry).
3. Clear brush roll: Remove hair and debris weekly.
4. Check hose/wand: Remove clogs if suction reduces.
5. Inspect cord: Do not use if damaged.

CAUTION! Unplug before maintenance. Do not use wet filters.

Regulatory Information

FCC Part 15: Class B device; complies with residential interference limits. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. UL listed for safety.

Troubleshooting

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-798-7398; www.sharkclean.com