Shark LA300 Series Vacuum Cleaner Manual

The Shark LA300 Series is a versatile upright vacuum cleaner designed for deep carpet cleaning and multi-surface use. It features advanced swivel steering, a lift-away pod for portable cleaning, a HEPA filter system, multiple suction settings, LED headlights, and a variety of specialized attachments. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Upright body with swivel steering, Lift-Away pod, Motorized brushroll, HEPA filter, Dust cup, Power cord, and accessory storage.

Assembly & Setup

Unpack and inspect all parts. Assemble on a clean, flat surface.

1. Attach the handle: Insert the handle into the upright body until it clicks securely.
2. Install the wand: Slide the wand into the back of the unit until it locks.
3. Attach the hose: Connect the hose to the designated port on the pod.
4. Store accessories: Place the crevice tool, upholstery tool, and dusting brush in the built-in caddy.
5. Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Do not force connections.

First-Time Use

Before first use, perform a quick test to ensure proper operation.

1. Power on: Press the power button located on the handle.
2. Select floor setting: Use the dial on the body to choose between Carpet, Hard Floor, or Bare Floor mode.
3. Test suction: Run the vacuum on a small area to ensure brushroll spins and suction is strong.
4. Check attachments: Remove and reattach each accessory to ensure proper fit.
5. Empty dust cup: After initial test, empty the dust cup to clear any manufacturing debris.

CAUTION! Keep hair, loose clothing, and fingers away from the brushroll while the vacuum is running.

Specifications

• Model Series: LA300 Series.
• Power Source: 120V AC, 60Hz.
• Cord Length: 25 feet.
• Filtration: HEPA filter, washable foam and felt filters.
• Dust Cup Capacity: 1.2 dry quarts.
• Cleaning Modes: Upright, Lift-Away, Handheld.
• Attachments Included: Crevice tool, Upholstery tool, Dusting brush.
• Weight: 14.5 lbs (upright mode).
• Warranty: Limited 5-year warranty.

Controls and Settings

Main controls are located on the handle and body. Handle: Power button, Suction release trigger. Body: Floor selector dial, Brushroll on/off switch, Lift-Away release button.

Settings: Carpet Mode (high suction, brushroll on), Hard Floor Mode (medium suction, brushroll on), Bare Floor Mode (low suction, brushroll off). Lift-Away: Press release button to detach pod for portable cleaning. Accessory Use: Attach tools to the end of the wand or hose for above-floor cleaning.

Using Attachments

Attachments enhance cleaning for specific tasks.

1. Crevice Tool: For tight spaces like between cushions, along baseboards, and in corners.
2. Upholstery Tool: For cleaning sofas, chairs, stairs, and car interiors.
3. Dusting Brush: For delicate surfaces like blinds, lampshades, and keyboards.
4. Quick-Release Wand: Extends reach for cleaning ceilings, fans, and under furniture.

Tip: Ensure the vacuum is in Lift-Away or Handheld mode when using attachments for above-floor cleaning.

Cleaning Modes

Three primary cleaning modes for different surfaces.

1. Upright Mode: Use for large carpeted and hard floor areas. The brushroll agitates dirt for deep cleaning.
2. Lift-Away Mode: Detach the pod to clean stairs, furniture, and other above-floor areas without carrying the full unit.
3. Handheld Mode: Remove the pod and attach the hose directly for quick spot cleaning and tight spaces.

WARNING! Always turn off the vacuum and unplug it before switching modes or removing attachments.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty Dust Cup: Empty after each use or when the full line is reached.
2. Clean Filters: Rinse the HEPA and foam filters every 3 months under cold water; air dry completely for 24 hours before reinstalling.
3. Clear Brushroll: Regularly remove hair and debris wrapped around the brushroll. Use the included cleaning tool.
4. Check for Blockages: Inspect the hose, wand, and nozzle for clogs if suction decreases.
5. Store Properly: Store in a cool, dry place. Wrap the cord around the cord hooks.

CAUTION! Never use the vacuum without all filters installed and completely dry.

Safety Information

Read all instructions before use. Keep away from children. Do not use to pick up liquids, burning materials, or sharp objects. Unplug before performing maintenance. Do not use with damaged cord or plug. If vacuum is not working properly, has been dropped, damaged, or left outdoors, contact Shark Customer Service.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B. This device may not cause harmful interference and must accept any interference received. Copyright © SharkNinja Operating LLC. Shark and Lift-Away are registered trademarks of SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; www.sharkclean.com