Shark IZ363HT Vacuum Cleaner Manual

The Shark IZ363HT is a cordless, bagless, stick vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal, LED headlights, a removable pod for handheld cleaning, and a rechargeable lithium-ion battery. It includes a wall-mounted docking station, a crevice tool, a dusting brush, and a multi-surface pet tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes & Operation 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean PowerFins brushroll, removable handheld pod, LED headlights, battery indicator, wall-mounted docking station, crevice tool, dusting brush, multi-surface pet tool.

FeatureDescription
DuoClean PowerFinsCombines a soft brushroll and PowerFins to capture large debris and deep-down dirt
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Removable Handheld PodDetaches for above-floor cleaning and spot cleaning
Cordless & BaglessPowered by a rechargeable lithium-ion battery; dust cup empties easily
Battery IndicatorLED lights show remaining battery charge
Wall DockFor convenient storage and charging
POWER ButtonTurns vacuum on/off
Mode SelectorSwitches between Eco and Max suction modes
Release ButtonsFor detaching handheld pod and accessories

Assembly & Installation

Unpack and inspect all contents. Ensure all parts are present.

  1. Install the wall dock: Choose a location near an outlet. Use included screws and anchors to mount dock securely to wall.
  2. Charge the vacuum: Place vacuum onto dock, ensuring charging pins align. Initial charge for at least 4 hours.
  3. Attach cleaning tools: Insert crevice tool, dusting brush, or pet tool into the handheld pod or wand as needed.
  4. Assemble main unit: The wand attaches to the main body with a click; the handheld pod clicks onto the wand.

WARNING! Ensure wall dock is securely mounted to prevent falling. Use correct charger provided.

First-Time Setup

After assembly and charging, prepare for first use.

  1. Fully charge: Leave on dock until battery indicator shows full (all LEDs lit).
  2. Check filter: Ensure foam and felt filters are installed correctly in dust cup.
  3. Test functions: Press POWER to turn on; switch between Eco and Max modes.
  4. Test attachments: Attach crevice tool and pet tool to ensure secure fit.

CAUTION! Do not use vacuum if it appears damaged. Keep away from water.

Specifications

Controls and Settings

Main controls located on handle and body.

Handle: POWER button, Mode Selector (Eco/Max), Battery Indicator LEDs.

Body: Release button for handheld pod, Dust Cup release button, Brushroll access latch.

Settings: Eco mode for longer runtime on hard floors and low-pile carpets; Max mode for deep cleaning on carpets and high-pile rugs. Battery indicator shows 3 levels: Green (high), Amber (medium), Red (low/charging needed).

Using Attachments

Attachments connect to wand or handheld pod for specialized cleaning.

  1. Detach handheld pod: Press release button on main body to remove pod.
  2. Attach tool: Insert crevice tool, dusting brush, or pet tool into end of pod or wand until it clicks.
  3. Use for cleaning: For upholstery, use pet tool; for tight spaces, use crevice tool; for shelves, use dusting brush.
  4. Reattach pod: Align pod with wand and click into place.

Tip: Ensure attachments are fully clicked in to prevent falling off during use.

Cleaning Modes & Operation

Operates as a full-size stick vacuum or handheld vacuum.

  1. Turn on: Press POWER button; select Eco or Max mode with Mode Selector.
  2. Floor cleaning: Glide over floors; LED lights activate automatically.
  3. Above-floor cleaning: Detach handheld pod with desired attachment.
  4. Empty dust cup: Press release button, hold over trash, and open bottom lid.
  5. Check brushroll: Regularly remove hair and debris from brushroll.
  6. Recharge: Place on dock after use; battery indicator will show charging status.

WARNING! Do not vacuum wet spills, large objects, or hot ashes. Keep hair, loose clothing, and fingers away from brushroll.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use.
  2. Clean filters monthly: Rinse foam and felt filters under water; air dry completely for 24 hours before reinstalling.
  3. Clear brushroll: Use scissors to cut away wrapped hair and fibers.
  4. Check for blockages: Inspect wand, hose, and nozzle if suction decreases.
  5. Store on dock when not in use to keep battery charged.

CAUTION! Do not use vacuum without filters installed. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of separately from household waste.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery depleted/not chargingPlace on dock; ensure charging pins connect; wait 10 minutes then try.
Weak suctionFull dust cup/blockage/dirty filtersEmpty dust cup; check for blockages in wand and nozzle; clean filters.
Brushroll not spinningObstruction/hair wrapTurn off, unplug, and clear brushroll of debris and hair.
Battery drains quicklyOld battery/Max mode overuseUse Eco mode for routine cleaning; replace battery if needed after 3-5 years.
Vacuum won't charge on dockDirty contacts/misalignmentClean charging pins on vacuum and dock; reposition vacuum on dock.

Reset: Remove from dock, hold POWER for 10 seconds, then re-dock.

Service: 1-800-798-7398; sharkclean.com

Shark IZ363HT Vacuum Cleaner Manual © - All Rights Reserved 2025