Shark IZ320EUT Vacuum Cleaner Manual

The Shark IZ320EUT is a cordless, bagless, upright vacuum cleaner with DuoClean technology, LED headlights, Anti-Allergen Complete Seal, and a removable, rechargeable battery. It features multiple cleaning modes, a large dust cup capacity, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Battery & Charging 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean floor head, Removable battery, Charging dock, Crevice tool, Upholstery tool, Dusting brush, and Pet multi-tool.

FeatureDescription
DuoClean TechnologyCombines a bristle brush and soft roller for carpets and hard floors
LED HeadlightsIlluminates dark areas under furniture
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
Removable BatteryLithium-ion battery for cordless operation; charges on dock
Large Dust CupEasy-empty, bagless dust cup with 0.7 qt capacity
Cleaning ModesNormal, Eco, and Boost for different cleaning needs
POWER ButtonTurns vacuum on/off
MODE ButtonCycles through cleaning modes (Normal/Eco/Boost)
Battery IndicatorLED lights show remaining battery charge
Floor SelectorSwitch for carpets or hard floors

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Insert the battery: Align battery with slot on back of vacuum; push until it clicks.
  2. Attach the floor head: Connect the wand to the floor head until it locks.
  3. Attach the wand to the vacuum body: Insert wand into body and lock into place.
  4. Place charging dock: Position dock on a flat, stable surface near an outlet.
  5. Plug in charger: Connect charger to dock and plug into 120V AC outlet.

WARNING! Ensure vacuum is turned off during assembly. Keep small parts away from children.

First-Time Use

Fully charge the battery before first use.

  1. Charge battery: Place vacuum on dock; charging indicator will light. Full charge takes approx. 4 hours.
  2. Select floor type: Use floor selector switch on floor head (Carpet/Hard Floor).
  3. Power on: Press POWER button; vacuum will start in Normal mode.
  4. Select cleaning mode: Press MODE button to cycle through Normal, Eco, and Boost.
  5. Begin cleaning: Push vacuum forward and back over surfaces.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brush roll.

Specifications

Controls and Settings

Main controls located on handle and body.

Handle: POWER button, MODE button, Battery indicator (4 LEDs).

Floor Head: Floor selector switch (Carpet/Hard Floor), Brush roll release button.

Cleaning Modes: Normal (balanced cleaning), Eco (extended run time), Boost (max suction for tough messes). Battery Indicator: LEDs show charge level (4=full, 1=low).

Using Attachments

For above-floor cleaning, detach wand and connect tools.

  1. Turn off vacuum.
  2. Press wand release button to detach wand from floor head.
  3. Connect desired attachment to end of wand or directly to hose.
  4. Turn vacuum on and clean.
  5. Common tools: Crevice tool (tight spaces), Upholstery tool (furniture), Dusting brush (surfaces), Pet multi-tool (pet hair).

Tip: Ensure attachments are fully clicked into place before use.

Cleaning Modes

Optimize cleaning and battery life with three modes.

  1. Normal Mode: Default setting for everyday cleaning.
  2. Eco Mode: Reduces power for longer run time; ideal for light cleaning.
  3. Boost Mode: Maximum suction for concentrated messes like pet hair or deep dirt.
  4. To switch: Press MODE button; indicator light will show current mode.
  5. Run times: Approx. 40 min (Eco), 25 min (Normal), 10 min (Boost).

WARNING! Boost mode drains battery quickly. Return to Normal or Eco when finished.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty Dust Cup: Press release button; remove cup and empty into trash. Clean filter after every 5-10 uses.

Clean Filters: Rinse pre-motor and post-motor filters under water; air dry completely for 24 hours before reinstalling.

Check Brush Roll: Remove floor head; clear any hair or debris wrapped around brush roll.

Clean Sensors: Wipe LED headlights and sensors with dry cloth.

CAUTION! Always turn off and remove battery before maintenance. Do not use damaged filters.

Battery & Charging

Battery is removable and rechargeable.

  1. Charging: Place vacuum on dock; ensure charging pins align. Indicator lights will pulse during charge.
  2. Battery Care: For best life, avoid fully depleting battery. Store in a cool, dry place.
  3. Battery Removal: Press battery release button and slide battery out.
  4. Battery Indicator: 4 LEDs on handle show remaining charge.

WARNING! Use only Shark-approved charger and battery. Do not expose battery to fire or extreme heat.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of properly according to local regulations.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery not charged/insertedCharge battery fully; ensure it's clicked into place.
Reduced suctionFull dust cup/clogged filterEmpty dust cup; check and clean filters; clear hose blockages.
Brush roll not spinningDebris wrapped around rollTurn off, remove floor head, and clear brush roll of obstructions.
Battery drains quicklyUsing Boost mode/filters dirtyUse Eco or Normal mode for general cleaning; clean filters.
Vacuum not chargingDirty contacts/dock issueClean charging contacts on vacuum and dock; ensure dock is plugged in.

Reset: Remove battery for 1 minute, then reinsert.

Service: 1-800-798-7398; www.sharkclean.com

Shark IZ320EUT Vacuum Cleaner Manual © - All Rights Reserved 2025