Shark IZ320 Series Vacuum Cleaner Manual

The Shark IZ320 Series is a cordless stick vacuum cleaner featuring DuoClean PowerFins technology, a self-cleaning brushroll, LED headlights, a removable battery, and multiple cleaning modes. It includes a docking station, crevice tool, and dusting brush. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Cleaning Modes & Operation 8. Maintenance & Care 9. Battery & Charging 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: DuoClean PowerFins brushroll, LED headlights, removable battery, docking station, crevice tool, dusting brush, and multi-surface cleaning modes.

Feature	Description
DuoClean PowerFins	Self-cleaning brushroll for carpets and hard floors
LED Headlights	Illuminates debris under furniture
Removable Battery	Lithium-ion battery for cordless operation
Docking Station	For storage and charging
Crevice Tool	For tight spaces and corners
Dusting Brush	For delicate surfaces and dusting
POWER Button	Turns vacuum on/off
Mode Selector	Switches between Eco, Normal, and Max modes
Battery Indicator	LED lights show remaining battery life
Wand Release	Converts to handheld vacuum

Assembly & Setup

Unpack and inspect contents. Assemble components as follows.

Attach wand to vacuum body: Align arrows and push until click.
Install battery: Insert battery into slot until locked.
Attach floor nozzle: Connect to wand until secure.
Place on docking station: Ensure charging contacts align.

WARNING! Ensure vacuum is off during assembly. Keep fingers clear of moving parts.

First-Time Use

Charge battery fully before first use.

Charge: Place vacuum on docking station; LED indicator will glow.
Power on: Press POWER button; select cleaning mode (Eco recommended).
Test on floor: Vacuum a small area to ensure proper suction.
Empty dust cup: Press release button and empty after use.

CAUTION! Do not use on wet surfaces. Keep hair and loose objects away from brushroll.

Specifications

Model: Shark IZ320 Series.
Technology: DuoClean PowerFins brushroll.
Battery: Removable lithium-ion, up to 60 minutes runtime (Eco mode).
Charging Time: Approximately 4 hours.
Dust Cup Capacity: 0.7 quarts.
Weight: 7.5 lbs.
Attachments: Crevice tool, dusting brush, docking station.
Power Source: 120V AC, 60Hz charging dock.
Warranty: 5-year limited warranty.

Controls and Settings

Access controls via buttons on handle. Front Panel: POWER, Mode Selector, Battery Indicator.

Modes: Eco (extended runtime), Normal (balanced cleaning), Max (maximum suction for deep cleaning).

Battery Indicator: Green (high), Amber (medium), Red (low). Wand Release: Press button to detach wand for handheld use. Dust Cup Release: Press button to remove and empty dust cup.

Attachments & Accessories

Crevice Tool: For corners, edges, and tight spaces. Dusting Brush: For upholstery, blinds, and delicate surfaces.

Turn off vacuum before changing attachments.
Align attachment with wand or nozzle; push until click.
Select appropriate mode for attachment (e.g., Eco for dusting).

Tip: Store attachments on docking station for easy access.

Cleaning Modes & Operation

Supports multi-surface cleaning on carpets, hard floors, and above-floor areas.

Select mode: Use Mode Selector (Eco, Normal, Max).
Begin cleaning: Push vacuum forward on floor; LED lights illuminate debris.
Switch to handheld: Press wand release; attach crevice tool or dusting brush.
Empty dust cup: Press release button; empty contents into trash.
Clean brushroll: Turn off vacuum; remove debris from brushroll as needed.

WARNING! Do not vacuum sharp objects, liquids, or hot ashes. Keep rotating brushroll away from cords.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup after each use.
Clean filter monthly: Rinse under cold water; air dry 24 hours.
Check brushroll for tangles: Remove hair and debris regularly.
Wipe exterior with dry cloth.

CAUTION! Do not use vacuum without filter. Ensure all parts are dry before reassembly.

Battery & Charging

Use only Shark-approved battery and charger.

Charging: Place vacuum on docking station; LED will glow red, then green when fully charged.
Battery removal: Press battery release button; slide out.
Storage: Store in cool, dry place; charge every 6 months if not in use.

WARNING! Do not expose battery to fire or extreme temperatures. Use only provided charger.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery/charging	Ensure battery is charged; check docking station connection.
Reduced suction	Full dust cup/clog	Empty dust cup; check hose and nozzle for blockages.
Brushroll not spinning	Tangles/obstruction	Turn off vacuum; remove debris from brushroll.
Battery not charging	Contacts/dock	Clean charging contacts; ensure dock is plugged in.
LED lights not working	Battery/low power	Recharge battery; if persists, contact support.

Reset: Remove battery for 30 seconds; reinsert and charge.

Service: 1-800-798-7398; www.sharkclean.com