Shark IZ300 Series Vacuum Cleaner Manual

The Shark IZ300 Series is a cordless, bagless stick vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal, LED headlights, a detachable pod for handheld cleaning, and a Flexology bendable handle. It includes multiple cleaning modes, a large dust cup, and a wall-mounted charging dock. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Modes 6. Attachments & Accessories 7. Cleaning Operation 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean PowerFins floor nozzle, Flexology handle, Detachable handheld pod, LED headlights, Dust cup with Anti-Allergen seal, Wall-mounted charging dock, and various attachments.

FeatureDescription
DuoClean PowerFinsDual-brushroll system for carpets and hard floors
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates debris under furniture
Flexology HandleBends to clean under low furniture without bending over
Detachable PodConverts to a handheld vacuum for above-floor cleaning
Cordless OperationPowered by rechargeable lithium-ion battery
Charging DockWall-mounted for storage and charging
Cleaning ModesEco, Normal, and Max suction power settings
Large Dust CupEasy-empty, washable container
AttachmentsIncludes crevice tool, dusting brush, and upholstery tool

Assembly & Setup

Unpack all components and inspect for damage.

  1. Attach the handle: Insert the Flexology handle into the main body until it clicks.
  2. Attach the floor nozzle: Connect the DuoClean nozzle to the handle or body as directed.
  3. Install the charging dock: Mount on wall using provided screws and anchors; ensure it's near an outlet.
  4. Charge the vacuum: Place vacuum on dock; initial charge time is approximately 3.5 hours.

WARNING! Ensure the vacuum is turned off and not charging during assembly. Keep small parts away from children.

First-Time Use

Fully charge before first use.

  1. Power on: Press the power button on the handle.
  2. Select mode: Use the mode button to cycle through Eco, Normal, and Max.
  3. Begin cleaning: Push vacuum forward on floor; the brushroll will engage automatically.
  4. Use attachments: Detach pod and connect desired tool for above-floor cleaning.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from brushroll.

Specifications

Controls and Modes

Main controls located on handle: Power button, Mode selector, Release buttons for pod and nozzle.

Power Button: Turns vacuum on/off. Mode Button: Cycles through Eco (extended runtime), Normal (balanced), Max (maximum suction). LED indicators show selected mode and battery level.

Release Buttons: Press to detach floor nozzle or handheld pod. Brushroll Switch: On/off for brushroll (on some models). Flexology Handle: Bend handle by pressing button and adjusting angle.

Attachments & Accessories

Attachments store on charging dock or vacuum body.

  1. Crevice Tool: For tight spaces, corners, and along edges.
  2. Dusting Brush: For delicate surfaces, blinds, and keyboards.
  3. Upholstery Tool: For sofas, chairs, and car interiors.
  4. Pet Multi-Tool: (On some models) Combines bristles and crevice tool for pet hair.

Tip: Ensure attachments click securely into place on the handheld pod.

Cleaning Operation

For floors and above-floor surfaces.

  1. Floor cleaning: Use with floor nozzle attached; vacuum in forward and backward motions.
  2. Low furniture: Bend Flexology handle to clean under beds and sofas.
  3. Above-floor cleaning: Detach pod, attach tool, and use as handheld vacuum.
  4. Empty dust cup: Press release button; hold over trash; open bottom lid to empty.
  5. Clean filters: Remove and tap off debris; wash as directed (see Maintenance).

WARNING! Do not vacuum large objects, liquids, or hot ashes. Turn off before emptying dust cup.

Maintenance & Care

Regular maintenance ensures optimal performance.

CAUTION! Always unplug charger and ensure vacuum is off before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of separately from household waste.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery depleted, not docked properlyPlace on charger; ensure dock is powered; check battery indicator.
Reduced suction or runtimeFull dust cup, clog, dirty filtersEmpty dust cup; check for blockages in hose and nozzle; clean filters.
Brushroll not spinningDebris entanglement, switch offTurn off, remove nozzle, clear debris; ensure brushroll switch is on.
Vacuum shuts off during useOverheating, battery protectionTurn off and let cool for 45 minutes; check for clogs; use appropriate mode.
Handheld pod won't detachRelease button not fully pressedPress release button firmly while pulling pod away from handle.
Not charging on dockPoor contact, dirty terminalsClean charging contacts on vacuum and dock with dry cloth; reposition.

Reset: Remove battery for 1 minute, then reinstall.

Service: 1-800-798-7398; sharkclean.com

Shark IZ300 Series Vacuum Cleaner Manual © - All Rights Reserved 2025