Shark IZ201EUT Vacuum Cleaner Manual

The Shark IZ201EUT is a cordless stick vacuum cleaner featuring DuoClean PowerFins technology, a self-cleaning brushroll, LED headlights, Anti-Allergen Complete Seal technology, and a removable battery. It includes a docking station for charging and storage, multiple cleaning modes, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum unit with DuoClean PowerFins brushroll, removable battery, docking station, crevice tool, dusting brush, and multi-surface pet tool.

FeatureDescription
DuoClean PowerFinsSelf-cleaning brushroll with fins for deep carpet cleaning and hard floor pickup
LED HeadlightsIlluminates dark areas under furniture
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
Removable BatteryLithium-ion battery for cordless operation; charges on docking station
Docking StationFor charging and storing vacuum and attachments
Cleaning ModesEco, Normal, and Max modes for different cleaning needs
POWER ButtonTurns vacuum on/off and cycles through cleaning modes
Battery IndicatorLED lights show remaining battery charge
Empty Dust CupButton releases dust cup for easy emptying
Wand ReleaseButton detaches wand for handheld use

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach wand: Insert wand into main vacuum body until it clicks.
  2. Attach floor nozzle: Connect floor nozzle to wand until it clicks.
  3. Install battery: Insert battery into vacuum body; ensure it clicks into place.
  4. Set up docking station: Place docking station on a flat, stable surface near a power outlet.
  5. Plug in docking station: Connect power adapter to docking station and wall outlet.

WARNING! Ensure vacuum is turned off during assembly. Keep fingers away from brushroll.

First-Time Use

Charge battery fully before first use.

  1. Charge battery: Place vacuum on docking station; charge until battery indicator shows full (approx. 4 hours).
  2. Power on: Press POWER button to turn on; press again to cycle through Eco, Normal, and Max modes.
  3. Begin cleaning: Push vacuum forward and back over surfaces; use attachments as needed.
  4. Empty dust cup: Press release button to remove dust cup; empty into trash.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from moving parts.

Specifications

Controls and Settings

Main controls located on vacuum handle. Docking station for charging.

Vacuum Handle: POWER button (on/off and mode cycle), battery indicator LEDs, wand release button, dust cup release button.

Cleaning Modes: Eco (quiet, extended run time), Normal (balanced cleaning), Max (maximum suction for tough messes). Battery Indicator: Green (high charge), Yellow (medium), Red (low), Flashing Red (needs charging). Maintenance: Check brushroll for debris; empty dust cup after each use; clean filters regularly.

Using Attachments

Attach tools for above-floor cleaning.

  1. Turn off vacuum.
  2. Remove wand: Press wand release button and detach wand.
  3. Attach tool: Insert desired attachment into wand or directly into handheld vacuum.
  4. Turn on vacuum and begin cleaning.

Tip: Use crevice tool for tight spaces, dusting brush for shelves, and pet tool for upholstery.

Cleaning Modes

Select mode based on cleaning need.

  1. Eco Mode: For light cleaning and extended run time. Press POWER once to turn on, then press to cycle to Eco (indicated by one LED).
  2. Normal Mode: For everyday cleaning. Cycle to Normal (two LEDs).
  3. Max Mode: For deep cleaning and high-pile carpets. Cycle to Max (three LEDs).
  4. Battery Saver: Vacuum automatically reduces power when battery is low to extend run time.

WARNING! Max mode reduces run time significantly. Use only when needed.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup after each use.
  2. Clean brushroll: Turn off vacuum; remove debris from brushroll with scissors or tool.
  3. Wash filters: Rinse foam and felt filters under water monthly; air dry completely before reinstalling.
  4. Check for blockages: Remove wand and inspect hose for clogs.
  5. Store on docking station to keep battery charged.

CAUTION! Do not use vacuum without filters. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery must be recycled or disposed of separately from household waste.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery not chargedPlace on docking station; charge for 4 hours. Ensure battery is properly inserted.
Reduced suctionFull dust cup or clogEmpty dust cup; check hose and brushroll for blockages; clean filters.
Brushroll not spinningDebris wrapped around brushrollTurn off vacuum; remove debris from brushroll.
Battery drains quicklyUsing Max mode; old batteryUse Eco or Normal mode for longer run time. Replace battery if older than 2 years.
Vacuum won't chargeDirty contacts; faulty dockClean charging contacts on vacuum and dock with dry cloth. Ensure dock is plugged in.

Reset: Remove and reinsert battery. Ensure vacuum is turned off.

Service: 1-800-798-7398; sharkclean.com

Shark IZ201EUT Vacuum Cleaner Manual © - All Rights Reserved 2025