Shark IZ102ANZ Vacuum Cleaner Manual

The Shark IZ102ANZ is a cordless stick vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal, LED headlights, a detachable pod for handheld cleaning, and a Flexology bendable wand. It includes a charging dock, multi-surface brushroll, crevice tool, dusting brush, and upholstery tool. Powered by a removable Lithium-Ion battery. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, DuoClean PowerFins brushroll, LED headlights, removable battery, charging dock, Flexology wand, and handheld pod.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach the wand: Insert the wand into the main vacuum body until it clicks.
2. Attach the floor nozzle: Connect the DuoClean nozzle to the end of the wand.
3. Install the battery: Insert the battery into the vacuum body until it locks.
4. Mount the charging dock: Use included screws to mount dock on wall near outlet.
5. Place vacuum on dock: Ensure charging contacts align.

WARNING! Ensure vacuum is powered off during assembly. Keep fingers away from brushroll.

First-Time Use

Fully charge battery before first use.

1. Charge: Place vacuum on dock; battery indicator will pulse during charging.
2. Power on: Press POWER button; select desired mode (Eco or Max).
3. Begin cleaning: Push vacuum forward on floor; LED lights will activate.
4. Adjust wand: Press wand release button to bend wand for under-furniture cleaning.
5. Empty dust cup: Press release button over trash bin; close lid securely.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from moving parts.

Specifications

• Type: Cordless stick vacuum with handheld pod.
• Technology: DuoClean PowerFins, Anti-Allergen Complete Seal.
• Power Modes: Eco (standard cleaning), Max (deep cleaning).
• Battery: Removable Lithium-Ion, 40V.
• Charging Time: Approximately 3.5 hours for full charge.
• Run Time: Up to 60 minutes in Eco mode; up to 30 minutes in Max mode.
• Dust Cup Capacity: 0.7 quarts (dry).
• Included Tools: Crevice tool, dusting brush, upholstery tool.
• Weight: 7.5 lbs (with battery).
• Power Source: 100-240V AC, 50/60Hz charging dock.

Controls and Indicators

Main controls located on vacuum body. Indicators show battery status and mode.

Power Button: Press once for Eco mode, twice for Max mode, press again to turn off.

Battery Indicator: 5 LED lights show charge level (all lit = full).

Wand Release Button: Press to bend wand; press again to lock upright.

Handheld Release Button: Press to detach pod for above-floor cleaning.

Brushroll On/Off: Switch on floor nozzle to activate/deactivate brushroll (for delicate rugs).

Using Attachments

Detach pod to use tools for detailed cleaning.

1. Detach pod: Press handheld release button; lift pod off wand.
2. Attach tool: Insert desired tool (crevice, dusting brush, upholstery) into pod nozzle.
3. Clean: Press POWER button on pod; guide tool over surface.
4. Reattach: Align pod with wand and click into place.

Tip: Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.

Cleaning Modes

Two power modes for different cleaning needs.

1. Eco Mode: Standard suction for everyday cleaning; maximizes battery life.
2. Max Mode: Maximum suction for deep cleaning carpets or heavy debris; reduces run time.
3. Brushroll Control: Turn brushroll off for delicate area rugs or hard floors.
4. Flexology Wand: Bend wand to clean under beds, sofas, and tables without stooping.

WARNING! Do not run vacuum over power cords or small objects that could clog nozzle.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup after each use: Press release button over trash.
2. Clean filters: Rinse foam and felt filters monthly; air dry completely before reinserting.
3. Clear brushroll: Cut away wrapped hair or fibers with scissors (unplug vacuum first).
4. Check for clogs: Remove wand and nozzle to clear any blockages.
5. Wipe exterior: Use dry cloth; do not use liquids or abrasive cleaners.

CAUTION! Ensure all parts are completely dry before reassembly. Do not operate with wet filters.

Battery & Charging

Use only Shark-approved battery and charger.

1. Charging: Place vacuum on dock; indicator pulses during charge, stays lit when full.
2. Battery removal: Press battery release button; slide battery out.
3. Storage: Store vacuum and battery in a cool, dry place away from direct sunlight.
4. Disposal: Do not dispose of battery in household trash; recycle according to local regulations.

WARNING! Do not charge battery near heat sources. Use only provided charging dock.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Battery disposal: Follow local regulations for Lithium-Ion batteries.

Troubleshooting

Reset: Remove battery for 10 seconds; reinsert and try again.

Service: 1-800-798-7398; sharkclean.com