Shark IW3000 Series Vacuum Cleaner Manual

The Shark IW3000 Series is a versatile cordless stick vacuum cleaner featuring powerful suction, a self-cleaning brushroll, multiple cleaning modes, a detachable pod for handheld cleaning, LED headlights, and a long-lasting rechargeable battery. It includes various attachments for floors, carpets, upholstery, and hard-to-reach areas. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Modes 6. Using Attachments 7. Cleaning & Maintenance 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized floor nozzle with self-cleaning brushroll, Detachable cleaning pod, LED headlights, Power button, Mode selector, Battery indicator, Charging dock, Crevice tool, Upholstery tool, Dusting brush.

FeatureDescription
Self-Cleaning BrushrollAutomatically removes hair wrap during use
Detachable PodConverts to a handheld vacuum for above-floor cleaning
LED HeadlightsIlluminates debris under furniture and in dark areas
Power/Mode ButtonTurns vacuum on/off and cycles through cleaning modes
Battery IndicatorShows remaining battery charge level
Charging DockStores and charges the vacuum when not in use
Crevice ToolFor tight spaces like between cushions and along edges
Upholstery ToolGentle cleaning for furniture, stairs, and car interiors
Dusting BrushSoft brush for delicate surfaces like blinds and lampshades
Multi-Surface CleaningAutomatically adjusts suction for carpets and hard floors

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach the handle: Insert the handle into the main body until it clicks securely into place.
  2. Install the floor nozzle: Align the nozzle with the connector on the body and push until it clicks.
  3. Charge the battery: Place the vacuum on the charging dock and plug the charger into a standard 120V AC outlet.
  4. Attach accessories: Store tools on the dock or attach to the vacuum as needed.

WARNING! Ensure all parts are securely connected before use. Do not force connections.

First-Time Use

Fully charge the vacuum before initial use.

  1. Power on: Press the Power button on the handle.
  2. Select mode: Press the Mode button to cycle through Eco, Normal, and Max suction settings.
  3. Begin cleaning: Push the vacuum forward on floors; the brushroll will engage automatically.
  4. Empty dust cup: Press the release button to detach and empty the dust cup after use or when full.

CAUTION! Keep hair, loose clothing, and fingers away from moving parts and openings.

Specifications

Controls and Modes

Main controls located on the handle. Power Button: Turns vacuum on/off. Mode Button: Cycles through Eco (extended run time), Normal (balanced cleaning), Max (maximum suction for tough messes).

Indicator Lights: Battery status LED shows charge level (green=high, amber=medium, red=low). Brushroll Indicator: Flashes if brushroll is clogged or needs attention.

To detach handheld pod: Press release button near dust cup and lift pod away from stick. To reattach: Align and push until it clicks.

Using Attachments

For above-floor cleaning, detach the pod and attach desired tool.

  1. Turn off vacuum before changing attachments.
  2. Press accessory release button on pod and remove current tool.
  3. Align new tool and push firmly until it clicks into place.
  4. Turn vacuum back on and begin cleaning.

Tip: Use the crevice tool for corners and edges, upholstery tool for furniture, and dusting brush for delicate surfaces.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

  1. Empty dust cup: After each use, detach and empty into trash.
  2. Clean brushroll: Regularly remove hair and debris wrapped around brushroll.
  3. Wash filters: Rinse foam and felt filter under cold water every 1-3 months; air dry completely before reinstalling.
  4. Check for blockages: Inspect hose, nozzle, and attachments if suction decreases.
  5. Wipe surfaces: Use a dry cloth to clean vacuum exterior.

WARNING! Unplug charger and ensure vacuum is off before maintenance. Do not use water on electrical parts.

Battery & Charging

Use only the provided charging dock.

  1. Place vacuum on dock; charging indicator will light up.
  2. Full charge takes approximately 4 hours; battery indicator shows green when complete.
  3. For storage, charge fully and store in a cool, dry place.
  4. If not using for extended periods, charge every 3 months to maintain battery health.

CAUTION! Do not expose battery to extreme temperatures or fire. Use only Shark-approved chargers.

Care & Storage

Store vacuum on charging dock in a dry area. Keep away from heat sources and direct sunlight.

CAUTION! Do not store with a wet filter or damp dust cup. Ensure all parts are dry before storage.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery depleted/not chargedPlace on charger; ensure dock is plugged in; wait for charge.
Reduced suctionFull dust cup/clogged filter/blockageEmpty dust cup; clean filter; check hose and nozzle for obstructions.
Brushroll not spinningHair/debris wrapTurn off and unplug; remove brushroll and clear debris.
Battery not chargingPoor contact/faulty outletEnsure vacuum is properly seated on dock; try different outlet.
Vacuum turns off unexpectedlyOverheating/battery protectionAllow to cool for 45 minutes; check for blockages; recharge.

Reset: Turn off, remove from charger, wait 10 seconds, then place back on charger.

Service: 1-800-798-7398; sharkclean.com

Shark IW3000 Series Vacuum Cleaner Manual © - All Rights Reserved 2025