Shark IR70UK Series Vacuum Cleaner Manual

The Shark IR70UK Series is a versatile upright vacuum cleaner featuring Lift-Away technology, Anti-Hair Wrap brushroll, DuoClean PowerFins, Advanced Swivel Steering, and a HEPA filtration system. It is designed for deep cleaning carpets and hard floors, with multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, DuoClean PowerFins floor head, Advanced Swivel Steering, HEPA filter, Crevice tool, Upholstery tool, Dusting brush, and Power cord.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach floor head: Insert wand into floor head socket until it clicks.
2. Connect wand to pod: Insert wand into the main body pod until it locks.
3. Attach hose: Connect hose to the front of the pod.
4. Install filters: Place foam and felt filters into the dust cup assembly.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; ensure all parts are securely connected.

1. Select surface setting: Use brushroll on/off switch for carpets or hard floors.
2. Adjust suction: Use suction control dial for high or low power.
3. Begin vacuuming: Press power button and push vacuum forward.
4. Use Lift-Away mode: Press release button to detach pod for stairs or furniture.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model Series: IR70UK.
• Technology: Lift-Away, DuoClean PowerFins, Anti-Hair Wrap.
• Filtration: HEPA filter, foam and felt pre-filters.
• Dust Cup Capacity: 1.2 liters.
• Cord Length: 7.6 meters (25 feet).
• Attachments: Crevice tool, upholstery tool, dusting brush.
• Power Source: 220-240V AC, 50-60Hz.
• Weight: 6.8 kg (15 lbs).
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, Suction control dial. Body: Brushroll on/off, Dust cup release, Wand release, Hose release.

Settings: Suction (High/Low), Brushroll (On for carpets, Off for hard floors), Lift-Away mode (detach pod).

Indicator lights: Filter check light (if equipped). Nozzle height: Automatically adjusts on carpets.

Using Attachments

For above-floor cleaning: detach pod or use hose and wand.

1. Detach hose: Press hose release button.
2. Attach tool: Insert crevice, upholstery, or dusting tool into hose end.
3. Select suction: Use high suction for deep cleaning, low for delicate surfaces.
4. Reattach: Press hose back into pod until it clicks.

Tip: Ensure vacuum is off when changing attachments.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Clean brushroll: Remove floor head, cut away wrapped debris with scissors.
2. Wash filters: Rinse foam and felt filters monthly; air dry for 24 hours.
3. Check HEPA filter: Replace every 12 months or as needed.
4. Inspect hose and wand: Clear any blockages.

WARNING! Unplug vacuum before maintenance. Do not use damaged parts.

Emptying the Dust Cup

Empty dust cup when full or after each use.

1. Turn off and unplug vacuum.
2. Press dust cup release button; remove cup.
3. Hold over trash bin; press bottom latch to open door.
4. Close door; reattach dust cup until it clicks.

CAUTION! Empty dust cup outdoors if possible to reduce dust dispersal.

Care & Storage

Unplug and wind cord. Store in a dry, cool place.

CAUTION! Do not store with wet filters. Keep away from heat sources and water.

Regulatory Information

Complies with EU directives for electrical equipment. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.co.uk or contact 0800 862 0453 (UK).

Troubleshooting

Reset: Unplug for 1 hour if motor overheats.

Service: 0800 862 0453; www.sharkclean.co.uk