Shark IR142 Vacuum Cleaner Manual

The Shark IR142 is a lightweight, corded upright vacuum cleaner featuring a Lift-Away pod for portable cleaning, a motorized brushroll for carpets, a HEPA filter, multiple cleaning modes, and various attachments for above-floor cleaning. It is designed for home use with a 25-foot power cord and swivel steering. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with handle, Lift-Away pod, motorized brushroll, dust cup, HEPA filter, crevice tool, dusting brush, upholstery tool, and 25-foot power cord.

Feature	Description
Lift-Away Technology	Detachable pod for portable cleaning above floors
Motorized Brushroll	Deep cleans carpets and agitates debris
HEPA Filter	Captures 99.9% of dust and allergens
Swivel Steering	Maneuvers easily around furniture
Cord Length	25-foot power cord for extended reach
Cleaning Modes	Upright, Lift-Away, and handheld modes
Attachments	Crevice tool, dusting brush, upholstery tool included
Dust Cup Capacity	0.9 dry quarts; easy-empty design
Power Switch	On/off control on handle
Brushroll On/Off	Switch for hard floors and delicate rugs

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into main body until it clicks into place.
Install wand: Insert wand into hose connector on the vacuum body.
Attach floor nozzle: Connect floor nozzle to the wand or Lift-Away pod.
Install filter: Place HEPA filter into the filter compartment at the back of the dust cup.
Store attachments: Hang crevice tool and dusting brush on the provided hooks.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in power cord; select cleaning mode.

Select mode: Choose upright for floors or press Lift-Away release for above-floor cleaning.
Adjust brushroll: Set brushroll to ON for carpets, OFF for hard floors.
Begin vacuuming: Press power switch on handle; push vacuum forward on floor.
Empty dust cup: Press release button to remove and empty cup when full.

CAUTION! Keep cord away from brushroll and moving parts. Do not vacuum large objects.

Specifications

Model: Shark IR142.
Type: Corded upright vacuum with Lift-Away.
Power Cord: 25 feet.
Dust Cup Capacity: 0.9 dry quarts.
Filtration: HEPA filter.
Cleaning Modes: Upright, Lift-Away, handheld.
Attachments:Crevice tool, dusting brush, upholstery tool.
Brushroll: Motorized with on/off control.
Weight: 12.5 lbs.
Power Source: 120V AC, 60Hz.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, brushroll on/off button. Body: Lift-Away release button, dust cup release, hose connector.

Settings: Brushroll on for carpets; off for hard floors or delicate rugs. Mode selection: Upright for floors; detach pod for stairs and furniture. Suction control: Automatic based on floor type.

Using Attachments

Attach tools to wand or hose for above-floor cleaning.

Detach pod: Press Lift-Away button to separate pod from floor nozzle.
Connect tool: Insert crevice tool, dusting brush, or upholstery tool into wand or hose end.
Select suction: Brushroll automatically turns off in handheld mode.
Clean: Use tool on furniture, stairs, blinds, or tight spaces.

Tip: Ensure attachments click securely into place before use.

Cleaning Modes

Three primary modes for versatile cleaning.

Upright Mode: For carpets and bare floors. Keep pod attached to floor nozzle.
Lift-Away Mode: Press release button to detach pod; clean stairs, furniture, and above-floor areas.
Handheld Mode: Remove wand and attach tool for spot cleaning.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty after each use.
Clean filter: Remove HEPA filter every month; tap gently to remove dust.
Check brushroll: Regularly remove hair and debris wrapped around brushroll.
Inspect hose: Clear clogs if suction decreases.

CAUTION! Unplug vacuum before performing any maintenance.

Care & Storage

Store in a cool, dry place. Wrap cord around cord hooks.

CAUTION! Do not store vacuum with a wet filter. Keep away from heat sources.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Debris/switch	Clear hair and debris from brushroll; ensure brushroll switch is ON.
Vacuum overheating	Clog/filter	Turn off and unplug; clear clogs; clean filter; let cool for 60 minutes.
Unusual noise	Object in brushroll/hose	Turn off and inspect brushroll and hose for foreign objects.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com