Shark IQRobot SELF-EMPTY XL AV1010AE Series Vacuum Cleaner Manual

The Shark IQRobot SELF-EMPTY XL AV1010AE Series is a smart robotic vacuum with self-emptying base, Wi-Fi connectivity, home mapping, voice control compatibility, multi-surface cleaning, and XL dustbin capacity. It features advanced navigation, allergen capture, and scheduled cleaning. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Self-Emptying Base 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Emptying Base, Charging Dock, Dual Side Brushes, Filter, Remote Control, Power Adapter.

Feature	Description
Self-Emptying Base	Automatically empties robot dustbin into base bag
Wi-Fi Connectivity	Connects to SharkClean app for control and scheduling
Home Mapping	Creates smart map of your home for efficient cleaning
Voice Control	Works with Alexa and Google Assistant
Multi-Surface Cleaning	Adjusts automatically for carpets and hard floors
XL Dustbin Capacity	Holds more debris between empty cycles
Boundary Strips	Virtual barriers to restrict cleaning areas
Auto-Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Allergen Capture	Sealed system with anti-allergen complete seal
Spot Cleaning	Intensive clean of concentrated areas

Installation & Setup

Unpack and inspect all components. Place base on level surface.

Install Self-Emptying Base: Place against wall, plug into outlet, ensure clear space around.
Charge Robot: Place robot on charging contacts at base; LED indicates charging.
Install Side Brushes & Filter: Attach brushes; insert filter into dustbin.
Prepare Cleaning Area: Remove small objects, cords, and clutter from floor.

WARNING! Keep base and robot away from stairs and wet areas. Ensure proper ventilation around base.

First-Time Configuration

Power on robot; follow initial setup prompts.

Initial Charge: Allow robot to charge fully (approx. 4 hours) before first use.
Download App: Install SharkClean app from App Store or Google Play.
Connect to Wi-Fi: Use app to connect robot to your 2.4GHz Wi-Fi network.
Create Home Map: Start cleaning run to allow robot to map your home.
Set Preferences: Configure cleaning modes, schedules, and no-go zones in app.

CAUTION! Do not move base during initial mapping. Ensure Wi-Fi signal is strong.

Specifications

Model Series: AV1010AE
Type: Robotic Vacuum with Self-Emptying Base
Navigation: Smart Sensor Navigation with Home Mapping
Connectivity: Wi-Fi (2.4GHz), Bluetooth
Voice Control: Amazon Alexa, Google Assistant compatible
Dustbin Capacity: Robot: 0.5L; Base Bag: 1.5L
Run Time: Up to 90 minutes per charge
Charging Time: Approximately 4 hours
Power Source: 100-240V AC, 50/60Hz
Operating Temp: 32°F to 104°F (0°C to 40°C)

Controls and Settings

Access controls via physical buttons, remote, or SharkClean app.

Robot Buttons: POWER/CLEAN, SPOT, DOCK, Wi-Fi.

App Controls: Start/Stop, Schedule, Select Room, Set No-Go Zones, View History, Adjust Suction Power.

Cleaning Modes: Auto (default), Eco (quiet), Max (deep clean), Spot.

Settings: Suction Power (Eco/Max), Carpet Boost (On/Off), Scheduling (Daily/Weekly), Do Not Disturb (schedule quiet hours), Map Management (save/edit maps).

Connecting to Wi-Fi & App

Requires 2.4GHz Wi-Fi network and SharkClean app.

Ensure robot is powered on and near router.
Open SharkClean app, tap "+" to add device.
Follow in-app instructions to connect robot to Wi-Fi.
Name your robot and assign to home location.

Tip: If connection fails, restart robot and router, ensure correct Wi-Fi password.

Cleaning Modes & Scheduling

Supports multiple cleaning modes and customizable schedules.

Start Cleaning: Press CLEAN on robot or Start in app.
Select Mode: Choose Auto, Eco, Max, or Spot in app.
Room Select: In app, select specific rooms to clean from saved map.
Schedule: Set daily or weekly cleaning schedules in app.
Voice Control: Use "Alexa, ask Shark to start cleaning" or similar.
Boundary Setting: Use virtual walls or no-go zones in app to restrict areas.
Pause/Resume: Press CLEAN button to pause; press again to resume.
Return to Dock: Press DOCK button or select in app.

WARNING! Remove pet waste, liquids, and large objects before cleaning. Do not use on wet surfaces.

Maintenance & Self-Emptying Base

Regular maintenance ensures optimal performance.

Robot Maintenance: Empty dustbin after each run; clean filter weekly; check and clear brushes monthly; clean sensors with dry cloth.

Self-Emptying Base: Base automatically empties robot dustbin when docked. Replace base bag every 30-60 days (indicator light alerts when full).

Reset: Hold DOCK and SPOT buttons for 10 seconds to reset Wi-Fi settings.

Care & Cleaning

Unplug base before maintenance. Use dry cloth to clean robot and base exterior.

CAUTION! Do not use water or liquids on robot or base. Do not wash filter; tap to clean. Keep charging contacts clean and dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/obstruction	Ensure robot is charged; clear debris from wheels/sensors.
Not connecting to Wi-Fi	Network issues	Check 2.4GHz network; restart robot/router; reinstall app.
Poor navigation	Dirty sensors/dark room	Clean sensors with dry cloth; ensure adequate lighting.
Self-empty not working	Full bag/clog	Replace base bag; check for clogs in hose; ensure proper dock alignment.
Suction power low	Full dustbin/clogged filter	Empty robot dustbin; clean filter; check for blockages.

Reset to Factory: In app, go to Settings > Robot Settings > Reset Robot.

Service: 1-800-798-7398; sharkclean.com