Shark IQROBOT RV1300S3US Vacuum Cleaner Manual

The Shark IQROBOT RV1300S3US is a self-emptying robot vacuum with Wi-Fi connectivity, smart mapping, home mapping technology, voice control compatibility (Alexa & Google Assistant), a self-cleaning brushroll, and a bagless, self-emptying base that holds up to 30 days of dirt and debris. It features multiple cleaning modes, boundary strips, and smart sensors for navigation. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging Dock, Boundary Strips, Power Adapter, Remote Control (if included), Side Brushes, Filter, and User Manual.

Unpacking & Setup

Unpack and inspect all contents. Place on a level, clear floor area.

1. Assemble the Base: Place the Self-Empty Base against a wall, with at least 3 feet of clearance on each side and 5 feet in front. Plug into a standard 120V outlet.
2. Prepare the Robot: Install side brushes by pressing them onto the pins under the robot. Ensure the brushroll and filter are properly seated.
3. Charge the Robot: Place the robot on the charging contacts on the base. Initial charge may take up to 6 hours.
4. Clear the Area: Remove loose cords, small objects, and potential obstacles from the floor.

WARNING! Keep the robot and base away from stairs, heat sources, and water. Do not place on uneven surfaces.

First-Time Configuration

Power on the robot; follow app prompts for setup.

1. Download the SharkClean App: Available on iOS and Android. Create an account.
2. Connect to Wi-Fi: Press and hold the DOCK and MAX buttons on the robot until the Wi-Fi light flashes. Follow in-app instructions to connect to your 2.4 GHz network.
3. Initial Mapping Run: Start a full cleaning cycle from the app. The robot will explore and map your home. Keep doors open and ensure good lighting.
4. Name Your Rooms: In the app, edit the map to label rooms (Living Room, Kitchen, etc.).
5. Set Up No-Go Zones/Boundary Strips: Use the app to draw virtual boundaries or lay down physical boundary strips.

CAUTION! Do not pick up or move the robot during the initial mapping run.

Specifications

• Model: Shark IQ Robot RV1300S3US.
• Type: Self-Emptying Robot Vacuum.
• Dustbin Capacity (Robot): 0.2 quarts.
• Base Capacity: Holds up to 30 days of debris.
• Power Source: Rechargeable Lithium-Ion battery. Base: 120V AC, 60Hz.
• Run Time: Up to 90 minutes (varies by mode).
• Connectivity: 2.4 GHz Wi-Fi, Bluetooth.
• Voice Control: Amazon Alexa, Google Assistant.
• Filter: Washable HEPA-style filter.
• Cleaning Modes: Eco, Normal, Max.
• Included Accessories: Self-Empty Base, 2 Side Brushes, Filter, Boundary Strips, Power Adapter.

Controls and Indicators

Access physical controls on the robot or use the SharkClean app.

Robot Top Buttons: CLEAN (Start/Pause), DOCK (Return to Base), SPOT (Clean a focused area), MAX (Cycle suction power), Wi-Fi (Indicator/Link).

LED Indicators: Power/Charge light, Error alerts (flashing patterns).

App Controls: Start/Stop, Select Rooms, Set Schedules, View Cleaning History, Adjust Suction Power, Set Do-Not-Disturb Times, Manage Maps.

Base Indicator: Light indicates power and status (e.g., full bag alert).

Using the SharkClean App

Central hub for control, scheduling, and customization.

1. Dashboard: View battery, status, and start cleaning.
2. Map Management: View, edit, and save multiple floor maps. Name rooms and set cleaning preferences per room.
3. Scheduling: Set daily or weekly cleaning schedules for the whole home or specific rooms.
4. History: Review past cleaning sessions, including duration and area covered.
5. Settings: Adjust suction power, enable/disable Recharge & Resume, set Do-Not-Disturb hours.
6. Voice Control Setup: Link your Amazon or Google account for voice commands.

Tip: Ensure your robot and phone are on the same Wi-Fi network for optimal performance.

Cleaning Modes & Scheduling

Supports whole-home, room-specific, and spot cleaning.

1. Start a Cleaning Session: Press CLEAN on robot or use app. Select "Clean Entire House" or "Clean Specific Rooms."
2. Select Suction Mode: Eco (quiet, for daily cleaning), Normal (balanced), Max (deep clean for carpets).
3. Spot Cleaning: Press SPOT on robot; it will clean a concentrated 3x3 foot area.
4. Set a Schedule: In app, go to Schedule. Choose days, time, and rooms to clean automatically.
5. Boundary Control: Use physical strips or draw "No-Go Zones" in the app to block off areas.
6. Recharge & Resume: If enabled, robot will return to charge mid-job and resume cleaning.

WARNING! Do not use on wet surfaces. Pick up large debris or cords before cleaning.

Maintenance & Emptying

Regular maintenance ensures optimal performance.

1. Empty the Base: The base will automatically empty the robot. Empty the base dustbin when the indicator light alerts you (approx. every 30 days). Press release button, remove bin, discard debris.
2. Clean Robot Dustbin: Remove and empty the robot's dustbin after each cycle for best suction. Tap filter to dislodge dust.
3. Clean Filter: Remove filter from dustbin. Rinse under cold water until water runs clear. Air dry for 24+ hours completely before reinstalling.
4. Clean Brushes & Sensors: Regularly remove hair and debris from the self-cleaning brushroll, side brushes, and cliff sensors. Use cleaning tool provided.
5. Check Wheels & Casters: Ensure they spin freely and are clean.
6. Wipe Sensors & Charging Contacts: Use a dry cloth.

CAUTION! Do not use the robot without the filter installed. Ensure filter is completely dry before reuse.

Care & Storage

Store robot on its charging dock. Keep base plugged in. Store in a dry, room-temperature location.

CAUTION! Do not expose to extreme temperatures, direct sunlight, or moisture. Do not use harsh chemicals for cleaning.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference acceptance. ICES-003 Compliance: Class B digital apparatus. Copyright © SharkNinja Operating LLC. Shark, Shark IQ, and associated designs are trademarks of SharkNinja. For support, visit sharkclean.com/support or contact 1-888-228-5531.

Troubleshooting

Reset: For persistent issues, perform a factory reset via the app (Settings > Factory Reset).

Service: 1-888-228-5531; sharkclean.com/support