Shark IQROBOT RV1100SRUS Vacuum Cleaner Manual

The Shark IQROBOT RV1100SRUS is a self-emptying robot vacuum with smart home connectivity, multi-surface cleaning capabilities, and advanced navigation. It features Wi-Fi connectivity, voice control compatibility (Alexa/Google Assistant), a self-cleaning brushroll, HEPA filtration, and a bagless base that holds up to 30 days of dirt. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Settings 6. Smart Home Integration 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum unit, Self-Empty Base, Charging dock, Remote Control, Side brushes, HEPA filter, Self-cleaning brushroll.

Feature	Description
Self-Empty Base	Automatically empties robot's dustbin into base canister
Smart Navigation	Laser-based mapping and room-by-room cleaning
Wi-Fi Connectivity	Connects to SharkClean app for remote control
Voice Control	Works with Amazon Alexa and Google Assistant
Multi-Surface Cleaning	Automatically adjusts between carpets and hard floors
HEPA Filtration	Captures 99.97% of dust and allergens
Boundary Strips	Virtual no-go zones to restrict cleaning areas
Recharge & Resume	Returns to dock when battery low, resumes cleaning
Spot Cleaning	Intensive cleaning of concentrated areas
Dustbin Full Sensor	Alerts when robot dustbin needs emptying

Installation & Setup

Unpack and inspect all components. Place base on level surface.

Charge the robot: Place robot on charging dock; ensure power indicator lights.
Install side brushes: Attach to bottom of robot until they click into place.
Prepare cleaning area: Remove small objects, cords, and loose rugs.
Connect base power: Plug base into wall outlet; ensure green power light.
Install app: Download SharkClean app from App Store or Google Play.

WARNING! Keep away from stairs and elevated surfaces. Ensure charging contacts are clean and dry.

First-Time Configuration

Power on robot; follow app setup instructions.

Connect to Wi-Fi: In app, select your network and enter password.
Create home map: Allow robot to complete initial whole-home cleaning.
Name rooms: Use app to label rooms on your map.
Set no-go zones: Draw boundaries where robot shouldn't clean.
Schedule cleaning: Set daily or weekly cleaning schedules.

CAUTION! First mapping run may take 60-90 minutes. Ensure robot starts from dock.

Specifications

Model: Shark IQROBOT RV1100SRUS
Suction Power: Advanced digital motor with strong suction
Battery: Lithium-ion, up to 90 minutes runtime
Dust Capacity: Base holds up to 30 days of dirt
Filtration: HEPA filter with anti-allergen seal
Connectivity: 2.4GHz Wi-Fi required
Voice Control: Amazon Alexa, Google Assistant
Dimensions: Robot: 13.8" diameter x 3.6" height
Weight: Robot: 8.6 lbs
Power Source: 120V AC, 60Hz

Controls and Settings

Physical Controls: CLEAN button, DOCK button, SPOT CLEAN button, POWER switch. App Controls: Start/Stop, Schedule, Room Select, No-Go Zones, Cleaning History.

Remote: CLEAN, DOCK, SPOT, MAX, ECO mode selection.

Cleaning Modes: AUTO (smart navigation), ROOM (specific room cleaning), SPOT (concentrated area). Suction Settings: ECO (quiet), NORMAL (balanced), MAX (deep clean). Schedule Settings: Daily/Weekly schedules, specific rooms, cleaning times. Map Management: Save multiple maps, edit room boundaries, set keep-out zones.

Smart Home Integration

Works with Amazon Alexa and Google Assistant for voice commands.

Enable Shark skill in Alexa app or Google Home app.
Link your Shark account when prompted.
Discover devices; robot will appear as "Shark Robot Vacuum."
Use commands: "Alexa, tell Shark to start cleaning" or "Hey Google, ask Shark to dock."

Tip: Ensure robot is online in SharkClean app before voice setup.

Cleaning Modes & Scheduling

Supports multiple cleaning modes and flexible scheduling.

Start cleaning: Press CLEAN button or use app/voice command.
Select rooms: In app, choose specific rooms to clean.
Spot clean: Press SPOT button for intensive 2x2 foot area cleaning.
Schedule: Set daily/weekly schedules for whole home or specific rooms.
Pause/resume: Press CLEAN button to pause; press again to resume.
Return to dock: Press DOCK button or use voice command.
Eco mode: Reduces noise and power consumption for light cleaning.
Max mode: Increases suction for deep carpet cleaning.

WARNING! Clear floor of small objects and cords before cleaning. Empty base when full indicator lights.

Maintenance & Care

Regular maintenance ensures optimal performance.

Component	Maintenance Frequency	Procedure
Brushroll	Weekly	Remove hair and debris; check for wear
Side Brushes	Monthly	Clean and check for damage; replace if bent
HEPA Filter	Monthly	Tap out debris; rinse every 3 months (air dry completely)
Sensors	Weekly	Wipe with dry cloth
Wheels	Monthly	Remove wrapped hair and debris
Charging Contacts	Weekly	Clean with dry cloth
Dustbin	After each use	Empty and rinse (air dry completely)
Base Canister	When full	Empty into trash; wipe interior

CAUTION! Unplug base before maintenance. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit sharkclean.com or contact 1-888-228-5531. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot won't start	Low battery/not docked	Ensure robot is properly seated on dock; charge for 4 hours
Not connecting to Wi-Fi	Network issues	Ensure 2.4GHz network; restart router; reconnect in app
Poor navigation	Dirty sensors	Clean all sensors with dry cloth; clear floor obstacles
Weak suction	Full dustbin/clog	Empty dustbin; check for blockages in air path
Not emptying into base	Base full/clog	Empty base canister; check hose for obstructions
Not returning to dock	Obstructed path	Clear path to dock; ensure dock in open area
Error lights flashing	Various issues	Consult manual error code chart; restart robot
Voice commands not working	Skill not enabled	Re-enable Shark skill; relink account

Reset: Hold CLEAN and DOCK buttons for 10 seconds to reset robot.

Factory Reset: In app, go to Settings > Factory Reset (erases all maps and settings).

Service: 1-888-228-5531; sharkclean.com/support