Shark IQROBOT RV1000 Vacuum Cleaner Manual

The Shark IQROBOT RV1000 is a smart, self-emptying robot vacuum featuring Wi-Fi connectivity, voice control compatibility (Alexa/Google Assistant), home mapping with room select, self-cleaning brushroll, anti-allergen complete seal technology, and a self-empty base that holds up to 30 days of dirt. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging dock, Side brushes, Filter, Remote Control, Power adapter.

Feature	Description
Self-Empty Base	Automatically empties robot's dustbin into base; holds 30 days of dirt
Smart Mapping	Creates map of your home for room-by-room cleaning
Wi-Fi Connectivity	Connects to SharkClean app for control and scheduling
Voice Control	Works with Amazon Alexa and Google Assistant
Self-Cleaning Brushroll	Anti-hair wrap technology prevents tangles
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
Home Mapping	IQ Navigation 2.0 with room select and no-go zones
Battery	Lithium-ion, up to 90 minutes runtime
Dustbin Capacity	0.4 quarts (robot), 1.0 gallon (base)
Charging Time	Approximately 4 hours

Installation & Setup

Unpack and inspect contents. Place base on level surface against wall.

Install side brushes: Attach to bottom of robot until they click into place.
Charge robot: Place robot on charging dock; ensure power is connected to base.
Install filter: Remove dustbin, insert filter, and replace dustbin.
Power on: Press POWER button on robot or use remote.

WARNING! Keep base and robot away from stairs and high-traffic areas. Ensure charging contacts are clean.

First-Time Use

Fully charge robot before first use; follow app prompts for setup.

Clear floor: Remove cords, small objects, and clutter from cleaning area.
Start mapping run: Press CLEAN on robot or app to begin initial home mapping.
Set up Wi-Fi: Download SharkClean app, follow instructions to connect robot to your network.
Create schedule: Use app to set daily or weekly cleaning schedules.

CAUTION! Do not pick up or move robot during mapping. Allow it to complete the process.

Specifications

Model: Shark IQROBOT RV1000.
Type: Self-emptying robot vacuum.
Navigation: IQ Navigation 2.0 with smart sensors.
Connectivity: Wi-Fi (2.4 GHz), Bluetooth.
Voice Control: Amazon Alexa, Google Assistant.
Dustbin: Robot: 0.4 quarts; Base: 1.0 gallon.
Battery: Lithium-ion, 90 min runtime, auto-recharge.
Cleaning Modes: Auto, Room Select, Spot Clean, Manual Control.
Power Source: 120V AC, 60Hz.
Weight: Robot: 7.5 lbs; Base: 10.2 lbs.

Controls and Settings

Access controls via robot buttons, remote, or SharkClean app. Robot Buttons: POWER, CLEAN, DOCK, SPOT CLEAN.

Remote: POWER, CLEAN, DOCK, SPOT, ROOM SELECT, MAX, directional arrows.

App Settings: Schedule cleaning, set no-go zones, select rooms, view cleaning history, check filter status. Robot Settings: Auto-clean, eco mode, carpet boost. Base Settings: Self-empty frequency (Every time, Every 2-3 times, Manual).

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and SharkClean app.

Download SharkClean app from App Store or Google Play.
Create account or log in.
Press and hold DOCK and SPOT buttons on robot until Wi-Fi light flashes.
Follow in-app instructions to connect robot to your network.
Name your robot and set up voice control if desired.

Tip: Ensure robot is near router during setup. Restart router if connection fails.

Cleaning Modes & Scheduling

Supports multiple cleaning modes for different needs.

Auto Clean: Robot cleans entire mapped area using smart navigation.
Room Select: Choose specific rooms to clean via app or remote.
Spot Clean: Robot cleans a 3x3 foot area around starting point.
Manual Control: Use directional arrows on remote to drive robot manually.
Schedule: Set daily or weekly cleaning times in app.
Max Mode: Increases suction for deep cleaning on carpets.
Eco Mode: Reduces suction to extend battery life.

WARNING! Do not use on wet surfaces. Keep away from water and liquids.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty base bag: Replace when full indicator light turns on (approx. every 30 days).
Clean filter: Remove and tap gently monthly; replace every 3 months.
Clear brushroll: Remove hair and debris weekly.
Clean sensors: Wipe cliff and navigation sensors with dry cloth.
Check side brushes: Remove and clean monthly; replace if damaged.
Clean charging contacts: Wipe with dry cloth monthly.

CAUTION! Unplug base before maintenance. Use only Shark-approved replacement parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dirty contacts/power	Clean charging contacts on robot and base; ensure power cord is plugged in.
Robot not connecting to Wi-Fi	Network/router issues	Ensure 2.4 GHz network; restart robot and router; check app for updates.
Poor suction	Full dustbin/clog	Empty dustbin; check for clogs in brushroll, filter, or airways.
Robot getting stuck	Obstacles/clutter	Clear floor of cords, small objects; use virtual wall or no-go zones.
Error lights flashing	Various issues	Refer to manual error code chart; reset robot by holding POWER for 10 seconds.
Self-empty base not working	Full bag/clog	Replace bag; check for clogs in base hose; ensure robot is properly docked.

Reset: Hold POWER button for 10 seconds to reset robot.

Service: 1-800-798-7398; sharkclean.com