Shark IQROBOT QR1W00SRUS Vacuum Cleaner Manual

The Shark IQROBOT QR1W00SRUS is a Wi-Fi connected, self-emptying robot vacuum with smart mapping, home mapping technology, voice control compatibility (Alexa & Google Assistant), a self-cleaning brushroll, and a bagless base that holds up to 30 days of dirt. It features multiple cleaning modes, obstacle detection, automatic recharge and resume, and is designed for cleaning hard floors and carpets. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Robot Vacuum, Self-Emptying Base, Charging Dock, Side Brushes, Filter, Remote Control (if included), Power Adapter.

Installation & Setup

Unpack and inspect all contents. Place the Self-Emptying Base on a level, hard surface against a wall, with at least 3 feet of clearance on each side and 5 feet in front.

1. Install Side Brushes: Snap the two side brushes onto the bottom of the robot.
2. Charge the Robot: Place the robot on the charging contacts in the base. Ensure the power cord is plugged into the base and a wall outlet.
3. Install the Filter: Remove the dustbin from the robot, open the lid, and insert the filter.
4. Prepare the Area: Clear floor of loose wires, cords, and small objects.

WARNING! The base is heavy; lift with care. Ensure the base is on a stable, level surface to prevent tipping.

First-Time Use

Fully charge the robot before first use (approx. 6 hours).

1. Initial Charge: Leave the robot on the dock until the indicator light is solid blue.
2. Download the App: Search for "SharkClean" in the Apple App Store or Google Play Store.
3. Create a Home Map: Press CLEAN on the robot or in the app for an initial whole-home cleaning run to generate the first map.
4. Name Your Rooms: In the app, edit the generated map to label rooms for targeted cleaning.

CAUTION! Do not pick up the robot during initial mapping. Keep pets and children away during the first run.

Specifications

• Model: Shark IQ Robot QR1W00SRUS.
• Type: Self-Emptying Robot Vacuum.
• Dustbin Capacity (Robot): 0.2 quarts.
• Base Capacity: Holds up to 30 days of dirt (bagless).
• Navigation: Smart Sensor IQ Navigation with room mapping.
• Connectivity: 2.4 GHz Wi-Fi only.
• Voice Control: Compatible with Alexa and Google Assistant.
• Cleaning Modes: Eco, Normal, Max.
• Power Source: Rechargeable Lithium-Ion battery. Base: 120V AC, 60Hz.
• Runtime: Up to 90 minutes (varies by mode).

Controls and Settings

Access controls via the SharkClean app, physical buttons on the robot, or voice commands.

Robot Buttons: CLEAN (start/pause), DOCK (send to base), SPOT (clean a concentrated area).

App Controls: Start/Pause, Select Room, Set Schedule, View Cleaning History, Set No-Go Zones, Adjust Suction Power (Eco/Normal/Max). Base Indicator Lights: Blue (charging/ready), Red (error or full bin). Installation Settings: Language, Wi-Fi setup, Room naming. Voice Setup: Link your Shark account to Alexa or Google Home app.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and smartphone.

1. Power on the base and ensure the robot is charged and on the dock.
2. Download and open the SharkClean app. Create an account or log in.
3. Tap "+" to add a device. Select "Robot Vacuums" then your model.
4. Follow in-app instructions: Press and hold DOCK and SPOT buttons on the robot until you hear a tone, then enter your Wi-Fi password.
5. The app will connect to the robot. This may take a few minutes.

Tip: Ensure your phone is connected to the 2.4 GHz band of your router during setup.

Cleaning Modes & Scheduling

Supports whole-home, room-specific, and zone cleaning.

1. Start Cleaning: Press CLEAN on robot or in app. Use Eco, Normal, or Max mode.
2. Clean Specific Rooms: In the app, tap "Select Rooms" on your map and choose which to clean.
3. Set a Schedule: In the app, go to Schedule, tap "+", set days, time, and rooms.
4. Spot Cleaning: Press the SPOT button on the robot to clean a 3x3 foot area.
5. Set No-Go Zones: In the app map editor, draw lines where the robot should not cross.
6. Recharge & Resume: Enabled by default; robot will return to charge and continue if job is incomplete.

WARNING! Do not run the robot over large debris, liquids, or pet waste. Pick up loose cords.

Self-Emptying Base

The base automatically empties the robot's dustbin after most cleaning jobs.

1. Operation: When the robot docks, the base will activate and empty the contents into its large bin.
2. Emptying the Base: When the "Bin Full" indicator lights, lift the lid, remove the bin, and empty it into the trash. The filter is reusable—tap it clean over a trash can.
3. Maintenance: Wipe the interior of the base with a dry cloth. Do not wash the filter with water.

Note: The base can hold about 30 days of debris for an average home.

Care & Maintenance

Unplug the base before performing maintenance.

• Daily/Weekly: Empty the robot dustbin if needed. Check and clear the brushroll of hair or fibers.
• Monthly: Clean the filter by tapping it gently. Rinse the dustbin with water (air dry completely for 24 hrs before reinserting).
• As Needed: Wipe sensors and charging contacts on robot and base with a dry cloth. Check side brushes for damage.

CAUTION! Do not use the robot or base with wet components. Do not immerse any part in water.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark, Shark IQ Robot, and associated designs are trademarks of SharkNinja. For support, visit sharkclean.com/support or contact 1-888-228-5531.

Troubleshooting

Reset: For major issues, perform a factory reset via the app (Settings > Factory Reset).

Service: 1-888-228-5531; sharkclean.com/support