Shark IQROBOT QR1G00SRUS Vacuum Cleaner Manual

The Shark IQROBOT QR1G00SRUS is a self-emptying robot vacuum with Wi-Fi connectivity, smart mapping, home mapping technology, voice control compatibility (Alexa & Google Assistant), multi-surface cleaning, and a self-cleaning brushroll. It features a high-efficiency filter, cliff sensors, and a rechargeable lithium-ion battery. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging dock, Remote Control, High-efficiency filter, Side brushes, Self-cleaning brushroll.

FeatureDescription
Self-Empty BaseAutomatically empties robot's dustbin into base for up to 30 days
Smart MappingCreates a map of your home for efficient cleaning
Wi-Fi ConnectivityConnects to SharkClean app for control and scheduling
Voice ControlWorks with Amazon Alexa and Google Assistant
Multi-Surface CleaningTransitions between carpets and hard floors
Self-Cleaning BrushrollReduces hair wrap for maintenance-free cleaning
Cliff SensorsPrevents falls from stairs and ledges
Recharge & ResumeAutomatically returns to dock to recharge and resumes cleaning
High-Efficiency FilterCaptures 99% of dust and allergens
Spot CleaningIntensive clean of a concentrated area

Installation & Setup

Unpack and inspect all contents. Place base on a level surface against a wall.

  1. Assemble the base: Connect power cord to base and plug into wall outlet.
  2. Prepare the robot: Remove protective films from sensors and brushes.
  3. Charge the robot: Place robot on charging contacts at base. Initial charge takes about 4 hours.
  4. Clear the area: Remove loose cords, small objects, and potential obstacles from floor.

WARNING! Keep base and robot away from heat sources and water. Ensure charging area is dry.

First-Time Use

Power on robot; follow setup prompts in app or using buttons.

  1. Initial charge: Ensure robot is fully charged before first cleaning cycle.
  2. Download app: Install "SharkClean" from App Store or Google Play.
  3. Create map: Allow robot to run a full cleaning cycle to map your home.
  4. Set preferences: Use app to name rooms, set no-go zones, and create cleaning schedules.

CAUTION! Do not pick up or move robot during initial mapping process.

Specifications

Controls and Settings

Access controls via physical buttons, remote, or SharkClean app.

Robot Buttons: POWER/CLEAN, SPOT CLEAN, DOCK, Wi-Fi indicator.

Remote: POWER, DOCK, SPOT, ROOM SELECT, EDGE CLEAN, MAX MODE.

App Controls: Start/Stop cleaning, Schedule, Select rooms, Set no-go zones, View cleaning history, Battery status, Filter replacement reminder. Settings: Suction power (Eco, Normal, Max), Cleaning mode (Auto, Edge, Spot), Do Not Disturb mode.

Connecting to Wi-Fi & App

Connect robot to 2.4 GHz Wi-Fi network for app control.

  1. Ensure robot is powered on and near your Wi-Fi router.
  2. Open SharkClean app and follow in-app setup instructions.
  3. Press and hold DOCK and SPOT buttons simultaneously until Wi-Fi light blinks blue.
  4. Select your network and enter password in app.
  5. Wait for connection confirmation (solid blue light).

Tip: For best connectivity, place base in an open area away from thick walls.

Cleaning Modes & Scheduling

Multiple cleaning modes for different needs.

  1. Auto Mode: Robot cleans entire mapped area efficiently.
  2. Room Select: Clean specific rooms via app or remote.
  3. Edge Clean: Focuses on cleaning along walls and edges.
  4. Spot Clean: Concentrated cleaning in a 3x3 foot area.
  5. Max Mode: Maximum suction for deep cleaning.
  6. Scheduling: Set daily or weekly cleaning schedules in app.
  7. Recharge & Resume: Automatically returns to dock when battery is low, then resumes cleaning.

WARNING! Always empty dustbin when full indicator lights up for optimal performance.

Maintenance & Care

Regular maintenance ensures optimal performance.

ComponentMaintenance FrequencyProcedure
DustbinAfter each cleaningEmpty and rinse with water (air dry completely)
FilterEvery 3 monthsTap to remove dust; rinse every 3 months (air dry 24 hrs)
BrushrollMonthlyRemove and clear debris/hair wrap
Side BrushesEvery 6 monthsCheck for wear; replace if damaged
Sensors & Charging ContactsWeeklyWipe with dry cloth
WheelsMonthlyRemove debris from wheel axles

CAUTION! Do not use robot with wet components. Ensure all parts are completely dry before reassembly.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. ICES-003 Compliance: Class B digital apparatus. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com/support or contact 1-888-228-5531.

Troubleshooting

SymptomPossible CauseCorrective Action
Robot won't power onBattery not chargedPlace on charging dock; ensure contacts are clean; charge for 4 hours.
Not connecting to Wi-FiWrong network/weak signalUse 2.4 GHz network only; move robot closer to router; restart robot.
Poor cleaning performanceFull dustbin/clogged filterEmpty dustbin; clean filter; check brushroll for obstructions.
Robot getting stuckObstacles/cluttered floorClear floor of cords, small objects; use virtual wall barriers.
Not returning to dockBlocked path/dirty sensorsClear path to dock; clean sensors on robot and base.
Error beeps/lightsVarious issuesConsult app for specific error code; refer to manual chart.

Reset: Hold DOCK and SPOT buttons for 10 seconds to reset Wi-Fi settings.

Service: 1-888-228-5531; sharkclean.com/support

Shark IQROBOT QR1G00SRUS Vacuum Cleaner Manual © - All Rights Reserved 2025