Shark IQROBOT QR1100SRUS Vacuum Cleaner Manual

The Shark IQROBOT QR1100SRUS is a self-emptying robot vacuum with smart mapping, Wi-Fi connectivity, voice control compatibility, and a self-cleaning brushroll. It features a high-efficiency filter, multi-surface cleaning, cliff sensors for fall prevention, and a recharge & resume function. The robot pairs with the SharkClean app for scheduling, no-go zones, and cleaning history. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Emptying 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging dock, Side brushes, High-efficiency filter, Power adapter.

Feature	Description
Self-Empty Base	Holds up to 30 days of dirt; automatically empties robot bin
Smart Mapping	Creates a map of your home for efficient cleaning
Wi-Fi Connectivity	Connects to SharkClean app for control and scheduling
Voice Control	Works with Amazon Alexa and Google Assistant
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Cliff Sensors	Prevents falls down stairs
Multi-Surface Brushroll	Cleans carpets and hard floors; anti-hair wrap technology
DOCK	Sends robot to charging base
CLEAN	Starts or pauses cleaning cycle
SPOT	Cleans a concentrated area

Installation & Setup

Unpack and inspect all components. Place base on level surface against wall.

Assemble base: Insert bag into self-empty base; ensure bag is seated properly.
Charge robot: Place robot on charging contacts at base; ensure power is connected.
Prepare area: Clear floor of cords, small objects, and loose rugs.
Install side brushes: Snap brushes onto underside of robot.

WARNING! Keep base away from stairs. Ensure charging area is dry and free of obstructions.

First-Time Use

Fully charge robot before first use (approx. 4 hours).

Power on: Press CLEAN button on robot or in app.
Initial mapping: Allow robot to complete a full cleaning cycle to map your home.
Set up app: Download SharkClean app; follow in-app instructions to connect.
Schedule cleaning: Use app to set daily or weekly schedules.

CAUTION! Do not pick up or move robot during initial mapping cycle.

Specifications

Model: Shark IQROBOT QR1100SRUS.
Dustbin Capacity: 0.5 liters (robot), 30 days (base).
Battery: Lithium-ion, rechargeable.
Connectivity: 2.4 GHz Wi-Fi, Bluetooth.
Compatibility: SharkClean app, Amazon Alexa, Google Assistant.
Cleaning Modes: Auto, Room Clean, Spot Clean, Manual Control.
Filter: High-efficiency foam and felt filter (washable).
Power Source: 120V AC, 60Hz.
Operating Time: Up to 90 minutes per charge.

Controls and Indicators

Robot buttons: CLEAN (start/pause), DOCK (return to base), SPOT (spot clean). Base indicator: Blue (power), Red (bag full/error).

App Controls: Start/Pause, Schedule, Select Rooms, Set No-Go Zones, Cleaning History, Battery Status.

Robot LEDs: Power (solid blue = on, flashing = charging, red = error). Voice Control: Use commands like "Alexa, ask Shark to start cleaning." Maintenance alerts: App notifications for full bin, tangled brush, filter replacement.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and smartphone.

Download SharkClean app from App Store or Google Play.
Create account or log in.
Press and hold DOCK and SPOT buttons on robot until Wi-Fi light flashes.
Follow in-app prompts to connect robot to your network.

Tip: Ensure robot is near router during setup. Disable VPN if connection fails.

Cleaning Modes & Scheduling

Auto: Cleans entire mapped area. Room Select: Clean specific rooms via app. Spot: Concentrated cleaning in a 3x3 ft area.

Start cleaning: Press CLEAN on robot or app.
Pause: Press CLEAN again to pause; robot stops and waits.
Send to dock: Press DOCK or use app command.
Schedule: In app, tap Schedule, set days/times.
No-Go Zones: Draw boundaries in app to restrict areas.
Manual control: Use directional arrows in app to steer robot.

WARNING! Do not use on wet surfaces. Keep away from pet bowls and loose cables.

Maintenance & Emptying

Regular maintenance ensures optimal performance.

Empty base: Replace bag when base indicator turns red (approx. every 30 days).
Clean robot bin: Remove and empty bin after each cycle; wash monthly.
Clean brushes: Remove brushroll and side brushes; clear hair and debris weekly.
Clean filter: Tap out dust; rinse with water every 2-3 months (air dry completely).
Clean sensors: Wipe cliff and charging sensors with dry cloth.

CAUTION! Unplug base before maintenance. Ensure filter is completely dry before reinserting.

Care & Storage

Store robot on charging base. Keep in dry, room-temperature area.

CAUTION! Do not expose to extreme temperatures or direct sunlight. Do not use harsh chemicals.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Poor contact/power	Ensure robot is properly seated on base; check power outlet; clean charging contacts.
Robot not connecting to Wi-Fi	Network/placement	Ensure 2.4 GHz network; move robot closer to router; restart robot and router.
Robot getting stuck	Obstacles/cliffs	Clear floor of cords and small objects; set no-go zones near problem areas.
Poor suction	Full bin/clog	Empty robot bin and base; check for blockages in brushroll and airpath.
Error beeps/lights	Brush tangle/sensor issue	Clean brushroll; wipe sensors; restart robot.

Reset: Hold DOCK and SPOT for 10 seconds to reset Wi-Fi.

Service: 1-800-798-7398; sharkclean.com