Shark IQ UR2410WXUS Vacuum Cleaner Manual

The Shark IQ UR2410WXUS is a self-emptying robot vacuum with smart navigation, Wi-Fi connectivity, and a self-cleaning brushroll. It features a bagless, self-emptying base that holds up to 30 days of dirt and debris, voice control compatibility with Alexa and Google Assistant, home mapping, room select, and zone cleaning. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking & Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Emptying 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging dock, Side brushes, Filter, Remote control (if included), Power adapter.

Feature	Description
Self-Empty Base	Automatically empties robot's dustbin into base canister
Smart Navigation	Uses sensors to map and navigate your home
Wi-Fi Connectivity	Connects to SharkClean app for control and scheduling
Voice Control	Works with Amazon Alexa and Google Assistant
Home Mapping	Creates a map of your home for room-specific cleaning
Room Select & Zone Cleaning	Clean specific rooms or areas via the app
Self-Cleaning Brushroll	Reduces hair wrap automatically
High-Efficiency Filter	Captures dust and allergens
Recharge & Resume	Returns to base to recharge, then resumes cleaning
Boundary Strips	Virtual boundaries to restrict cleaning areas

Unpacking & Setup

Unpack and inspect all contents. Place base on a level surface against a wall.

Install side brushes: Align and press onto robot's bottom until they click.
Charge the robot: Place robot on charging contacts in base. Ensure power is connected to base.
Prepare your home: Clear floor of cords, small objects, and fragile items.
Install filter: Insert filter into robot's dustbin compartment.

WARNING! Keep base and robot away from stairs and heated surfaces. Ensure charging contacts are clean and unobstructed.

First-Time Use

Fully charge robot before first use (approx. 6 hours).

Power on: Press CLEAN button on robot or use app.
Initial mapping run: Allow robot to run until it creates a full home map.
Set up Wi-Fi: Download SharkClean app and follow in-app instructions to connect.
Name your rooms: Use app to label rooms on the map for targeted cleaning.

CAUTION! Do not pick up or move robot during initial mapping. Ensure base is plugged in and in a permanent location.

Specifications

Model: Shark IQ UR2410WXUS.
Type: Self-emptying robot vacuum.
Dust Capacity: Base holds up to 30 days of debris.
Navigation: Smart sensor array with room mapping.
Connectivity: 2.4 GHz Wi-Fi, SharkClean app, Alexa, Google Assistant.
Battery: Rechargeable lithium-ion.
Filter: HEPA-style filter, washable.
Brushroll: Self-cleaning, anti-hair wrap technology.
Power Source: 120V AC, 60Hz.
Operating Time: Up to 90 minutes per charge.

Controls and Indicators

Robot Top: CLEAN (power/start), DOCK (return to base), SPOT (clean concentrated area). Base: Power indicator, Empty button.

App Controls: Start/Stop, Schedule, Room Select, Zone Cleaning, History, Map View.

Indicator Lights: Robot - Blue (cleaning), Red (error/low battery), Green (charging/docked). Base - White (power on), Flashing (emptying/error).

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and SharkClean app.

Download SharkClean app from iOS App Store or Google Play.
Create account or log in.
Press and hold DOCK and SPOT buttons on robot for 5 seconds until Wi-Fi light flashes.
Follow in-app prompts to connect robot to your network.
Name your robot and set up voice control if desired.

Tip: Ensure robot is near your Wi-Fi router during setup. Disable VPN on your phone if connection fails.

Cleaning Modes & Scheduling

Supports whole-home, room-specific, and zone cleaning.

Start cleaning: Press CLEAN on robot or use app.
Room select: In app, select specific rooms to clean.
Zone cleaning: Draw a rectangle on map to clean a specific area.
Schedule: Set daily or weekly cleaning schedules in app.
Spot cleaning: Press SPOT button for intense clean of a 3x3 foot area.
Recharge & resume: Enabled by default; robot returns to base if battery low, then resumes.

WARNING! Do not use on wet surfaces. Pick up loose cables and secure rug tassels to avoid tangling.

Maintenance & Emptying

Regular maintenance ensures optimal performance.

Empty base: Base automatically empties robot; manually press EMPTY button on base if needed.
Clean filter: Remove and tap filter monthly; rinse every 3 months (air dry 24 hrs).
Clear brushroll: Remove brushroll monthly to cut away wrapped debris.
Clean sensors: Wipe cliff and navigation sensors with dry cloth.
Check side brushes: Remove and clean if tangled.
Replace parts: Filter and side brushes as needed (purchased separately).

CAUTION! Unplug base before maintenance. Do not use damaged brushes or filters.

Care & Storage

Store robot on base. Keep in dry, room-temperature area.

CAUTION! Do not store with wet filter. Avoid direct sunlight and extreme temperatures.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/not docked	Place on charger; ensure contacts are clean; wait for full charge.
Not connecting to Wi-Fi	Network/robot issue	Ensure 2.4 GHz network; restart robot and router; redo setup in app.
Poor navigation	Dirty sensors/obstacles	Clean sensors; clear floor of obstacles; ensure good lighting.
Base not emptying	Full canister/blockage	Empty base canister; check for clogs in hose; press EMPTY button.
Brushroll not spinning	Tangled debris	Remove brushroll and clear hair/wrap; reinstall securely.
Error beeps/lights	Various issues	Refer to app error guide; restart robot; contact support if persistent.

Reset: Hold DOCK and SPOT for 10 seconds to reset Wi-Fi. Factory reset via app settings.

Service: 1-888-228-5531; sharkclean.com