Shark IQ Self-Empty Vacuum Cleaner Manual

The Shark IQ Self-Empty Vacuum Cleaner is a robotic vacuum with self-emptying base, Wi-Fi connectivity, smart home integration, multi-surface cleaning, and advanced navigation. It features a self-cleaning brushroll, allergen capture, and voice control compatibility. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging dock, Remote Control, Dual side brushes, HEPA filter, Dust bag.

Feature	Description
Self-Empty Base	Automatically empties robot dustbin into sealed bag
Wi-Fi Connectivity	Connects to SharkClean app for remote control
Smart Mapping	Creates home map for room-specific cleaning
Multi-Surface Cleaning	Adjusts automatically for carpets and hard floors
Self-Cleaning Brushroll	Prevents hair wrap
Voice Control	Works with Alexa and Google Assistant
Allergen Capture	HEPA filtration system
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Boundary Strips	Virtual no-go zones
Spot Cleaning	Targeted cleaning for concentrated messes

Installation & Setup

Unpack and inspect contents. Place base on level surface.

Assemble base: Insert dust bag into base compartment.
Position charging dock: Place against wall with 3 feet clearance on each side.
Charge robot: Place robot on dock; ensure charging contacts align.
Install side brushes: Attach to bottom of robot.
Power on: Plug base into AC power outlet.

WARNING! Keep base away from stairs and heat sources. Ensure charging area is free of obstacles.

First-Time Use

Fully charge robot before first cleaning (approx. 4 hours).

Clear floor area: Remove small objects, cords, and loose rugs.
Start cleaning: Press CLEAN button on robot or use app.
Map creation: Allow robot to complete full home mapping run.
Set up app: Download SharkClean app and connect to Wi-Fi.
Name rooms: Use app to label mapped rooms for targeted cleaning.

CAUTION! Do not pick up or move robot during initial mapping.

Specifications

Model: Shark IQ Self-Empty Robot Vacuum.
Navigation: Smart Sensor Navigation 2.0.
Battery: Lithium-ion, rechargeable.
Dust Capacity: Base holds up to 30 days of debris.
Filtration: HEPA filter captures 99.9% of allergens.
Connectivity: 2.4 GHz Wi-Fi required.
Voice Control: Compatible with Amazon Alexa, Google Assistant.
Power Source: 120V AC, 60Hz.
Operating Time: Up to 90 minutes per charge.

Controls and Settings

Robot buttons: CLEAN, DOCK, SPOT. App controls: Start/Stop, Schedule, Room Select, History.

App Features: Cleaning reports, filter replacement reminders, bag full alerts, error notifications.

Cleaning Modes: Auto, Eco, Max. Scheduling: Set daily or weekly cleaning schedules. Virtual Walls: Set no-go zones in app. Voice Commands: "Alexa, ask Shark to start cleaning." Maintenance Alerts: App notifies when to empty bin, clean filter, replace brushroll.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and SharkClean app.

Download SharkClean app from App Store or Google Play.
Create account or log in.
Press and hold DOCK and SPOT buttons on robot until Wi-Fi light flashes.
Follow in-app instructions to connect to home network.
Name your robot (e.g., "Living Room Vacuum").

Tip: Ensure robot is near router during setup. Disable VPN if connection fails.

Cleaning Modes & Scheduling

Supports whole-home, room-specific, and spot cleaning.

Auto Mode: Robot cleans entire mapped area.
Room Select: Choose specific rooms to clean via app.
Spot Cleaning: Robot spirals outward from selected spot.
Eco Mode: Quieter operation with extended battery life.
Max Mode: Maximum suction for deep cleaning.
Scheduling: Set daily schedule (time, rooms, mode).
Recharge & Resume: Enabled by default; robot returns to dock if battery low, then resumes.
Manual Control: Use directional arrows in app to drive robot.

WARNING! Do not use on wet surfaces. Pick up pet bowls and small objects before cleaning.

Maintenance & Care

Regular maintenance ensures optimal performance.

Task	Frequency	Instructions
Empty robot bin	After each cleaning	Press bin release; empty into trash.
Replace base bag	When full (app alert)	Pull tab to remove full bag; insert new bag.
Clean filter	Monthly	Tap gently; rinse with cold water; air dry 24 hrs.
Clear brushroll	Weekly	Remove brushroll; cut away wrapped hair/debris.
Wipe sensors	Monthly	Use dry cloth on cliff and bumper sensors.
Clean charging contacts	Monthly	Use dry cloth on robot and dock contacts.

CAUTION! Unplug base before maintenance. Do not use damaged brushroll or filter.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. Wi-Fi module complies with FCC RF exposure limits. This device may not cause harmful interference and must accept any interference received.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dock misaligned	Ensure robot is properly seated on dock; clean charging contacts.
Wi-Fi connection lost	Router issues	Restart router and robot; ensure 2.4 GHz network.
Poor cleaning performance	Full bin/clog	Empty robot bin; check for blockages in brushroll and suction path.
Robot stuck frequently	Obstacles	Clear floor of cords, socks, and small objects; use boundary strips.
Error beeps/lights	Various	Refer to app error code; common fixes: clear jam, reset robot.
Self-empty not working	Full bag/blockage	Replace bag; check hose for clogs; ensure base is powered.

Reset: Hold DOCK and CLEAN buttons for 10 seconds to reset robot.

Service: 1-800-798-7398; sharkclean.com/support