Shark IQ RV2410WXUS Vacuum Cleaner Manual

The Shark IQ RV2410WXUS is a self-emptying robot vacuum with Wi-Fi connectivity, IQ Navigation, home mapping, voice control compatibility, and a self-cleaning brushroll. It features a bagless, self-emptying base that holds up to 30 days of dirt and debris. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking & Contents 3. First-Time Setup 4. Specifications 5. Controls and Indicators 6. Using the SharkClean App 7. Cleaning & Maintenance 8. Emptying the Base 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot Vacuum, Self-Emptying Base, Power Cord, Side Brushes, Filter, Charging Dock.

FeatureDescription
Self-Emptying BaseAutomatically empties robot's dustbin into base for up to 30 days
IQ NavigationLaser-based mapping for efficient room-by-room cleaning
Wi-Fi ConnectivityControl via SharkClean app or voice assistants (Alexa, Google Assistant)
Home MappingCreates and saves smart maps of your home for targeted cleaning
Self-Cleaning BrushrollAnti-hair wrap technology prevents hair tangles
Power ButtonTurns robot on/off manually
CLEAN ButtonStarts a cleaning cycle
DOCK ButtonSends robot back to base to charge or empty
Wi-Fi IndicatorShows connection status
Battery IndicatorDisplays charge level

Unpacking & Contents

Unpack and inspect all contents. Place base on a level surface against a wall.

  1. Remove all packaging materials from the robot and base.
  2. Install side brushes: Snap onto the bottom of the robot.
  3. Place charging dock: Ensure 3 feet of clearance on each side and 5 feet in front.
  4. Connect base power: Plug into a standard 120V AC outlet.

WARNING! Keep loose clothing, long hair, and fingers away from brushroll and openings during operation.

First-Time Setup

Charge robot fully before first use; set up via app.

  1. Charge robot: Place on dock; charge for 4 hours until battery indicator is solid.
  2. Download app: Install SharkClean app from iOS App Store or Google Play.
  3. Connect to Wi-Fi: Follow in-app instructions to connect robot to your 2.4 GHz network.
  4. Create map: Let robot complete a full cleaning run to map your home.

CAUTION! Ensure base is on a hard, level surface and not in direct sunlight.

Specifications

Controls and Indicators

Robot Top: POWER, CLEAN, DOCK, Wi-Fi LED, Battery LED. Base: Empty Bin Indicator, Power LED.

App Controls: Start/Stop, Schedule, Select Rooms, No-Go Zones, View Cleaning History.

Cleaning Modes: Quiet, Normal, Max. Mapping: Edit map, Name rooms, Set keep-out zones. Settings: Voice prompts (On/Off), carpet boost, filter reset, factory reset.

Using the SharkClean App

Control cleaning, set schedules, and customize maps.

  1. Open app and ensure robot is online.
  2. Tap CLEAN to start a whole-home cleaning.
  3. Tap ROOMS to select specific areas to clean.
  4. Tap SCHEDULE to set daily or weekly cleaning times.
  5. Use VOICE CONTROL to start/stop via Alexa or Google Assistant.

Tip: For best mapping, clear floors of clutter before first run.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

  1. Empty dustbin: Remove and empty after each run (if not using self-empty base).
  2. Clean filter: Tap out debris weekly; rinse with cold water every 3 months.
  3. Clear brushroll: Remove hair and debris weekly.
  4. Clean sensors: Wipe cliff and navigation sensors with dry cloth.
  5. Check side brushes: Remove and clean if tangled.
  6. Clean charging contacts: On robot and dock with dry cloth.

WARNING! Unplug base before performing any maintenance. Ensure all parts are dry before reassembly.

Emptying the Base

The base holds up to 30 days of debris; indicator light turns red when full.

  1. Press latch on top of base to release dustbin.
  2. Remove bin and empty into trash.
  3. Reinsert bin until it clicks into place.
  4. Indicator light will turn off.

CAUTION! Empty base in a well-ventilated area to minimize dust exposure.

Care & Storage

Unplug base for extended storage. Store robot and base in a cool, dry place.

CAUTION! Do not store with a fully charged battery for long periods; charge to 50% if storing for months.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-888-228-5531.

Troubleshooting

SymptomPossible CauseCorrective Action
Robot not chargingPoor contact/powerEnsure robot is properly seated on dock; check outlet power.
Robot not connecting to Wi-FiNetwork/rangeEnsure 2.4 GHz network; move router closer; restart robot.
Robot gets stuckClutter/cordsClear area of obstacles, loose cords, and high-pile rugs.
Poor suctionFull dustbin/clogEmpty dustbin; check for clogs in brushroll and airpath.
Base not emptying robotFull bin/alignmentEmpty base bin; ensure robot is aligned correctly on dock.

Reset: Hold DOCK and CLEAN buttons for 10 seconds to reset Wi-Fi.

Service: 1-888-228-5531; sharkclean.com

Shark IQ RV2410WXUS Vacuum Cleaner Manual © - All Rights Reserved 2025