The Shark IQ RV2402WXUS is a self-emptying robot vacuum with Wi-Fi connectivity, smart mapping, home mapping technology, voice control compatibility (Alexa/Google Assistant), anti-allergen complete seal technology, and a self-cleaning brushroll. It features a high-efficiency filter, XL-capacity dust bin, and recharge/resume functionality. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: Robot vacuum, Self-Empty Base, Charging dock, Side brushes, Filter, Remote control (if included), Power adapter.
| Feature | Description |
|---|---|
| Self-Empty Base | Automatically empties robot's dust bin into base for up to 30 days |
| Smart Mapping & Navigation | Creates a map of your home for efficient cleaning |
| Wi-Fi Connectivity | Connects to SharkClean app for control and scheduling |
| Voice Control | Works with Amazon Alexa and Google Assistant |
| Anti-Allergen Complete Seal | Traps 99.9% of dust and allergens inside the vacuum |
| Self-Cleaning Brushroll | Reduces hair wrap for maintenance-free cleaning |
| Recharge & Resume | Automatically returns to dock to recharge, then resumes cleaning |
| XL Dust Bin | Large capacity for fewer emptyings |
| High-Efficiency Filter | Captures fine dust and allergens |
| Boundary Strips | Virtual barriers to restrict cleaning areas (in app) |
Unpack and inspect all contents. Place base on a level surface against a wall.
WARNING! Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Unplug before servicing.
Fully charge the robot before first use (approx. 4 hours).
CAUTION! Ensure the charging base is placed on a hard, level surface with at least 3 feet of clearance on either side and 5 feet in front.
Access controls via physical buttons, remote (if included), or SharkClean app.
Robot Buttons: CLEAN (Start/Pause), DOCK (Return to base), SPOT (Clean a concentrated area).
App Controls: Start/Pause, Dock, Room Select, Schedule, History, Map Management, Settings.
Cleaning Modes: Auto (whole house), Room (specific room), Spot (focused clean).
Settings: Suction power (Eco, Normal, Max), Do Not Disturb mode, Recharge & Resume toggle, Voice Assistant setup.
Requires 2.4 GHz Wi-Fi network and smartphone/tablet.
Tip: Ensure your robot is within range of your Wi-Fi router during setup.
Supports automated and manual cleaning.
WARNING! Do not pick up or move the robot while it is cleaning. This can disrupt the map.
Regular maintenance ensures optimal performance.
| Component | Frequency | Action |
|---|---|---|
| Robot Dust Bin | After each run (if not self-emptying) | Empty debris into trash |
| Self-Empty Base Bag | Every 30 days (or when full) | Replace disposable bag |
| Filter | Every 3 months | Tap to clean; rinse every 6 months (air dry 24 hrs) |
| Side Brushes | Every 6 months | Check for wear; replace if damaged |
| Self-Cleaning Brushroll | Monthly | Remove and clear any debris |
| Sensors & Charging Contacts | Weekly | Wipe with a dry cloth |
| Wheels | Monthly | Remove hair or string wrapped around axles |
CAUTION! Unplug the base before performing any maintenance. Do not use the vacuum without the filter installed.
FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. ICES-003: Complies with Canadian ICES-003. Copyright © SharkNinja Operating LLC. Shark and Shark IQ are trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com/support or contact 1-888-228-5531.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Robot won't turn on | Not charged / No power | Ensure robot is on dock; check if base is plugged in. |
| Not connecting to Wi-Fi | Wrong network / Signal weak | Use 2.4 GHz network; move router closer; restart robot & app. |
| Poor cleaning performance | Full bin / Clogged brushroll | Empty dust bin; clean filter; clear brushroll of debris. |
| Robot gets stuck frequently | Obstacles / Loose cables | Clear floor before running; use boundary strips in app. |
| Robot not returning to dock | Obstructed dock / Low battery | Clear area around dock; ensure dock is on level surface. |
| Error beeps or lights | Wheel stuck / Brushroll jam | Check for obstructions; clear wheels and brushroll. |
| Map lost or inaccurate | Robot was moved / Interrupted | Allow a new mapping run; do not move robot during cleaning. |
Reset: Press and hold CLEAN and DOCK buttons for 10 seconds to reset Wi-Fi and clear map.
Service: 1-888-228-5531; sharkclean.com/support