Shark IQ RV2402WBUS Vacuum Cleaner Manual

The Shark IQ RV2402WBUS is a self-emptying robot vacuum with Wi-Fi connectivity, smart mapping, home mapping technology, voice control compatibility (Alexa/Google Assistant), multi-surface cleaning, and a self-cleaning brushroll. Powered by a rechargeable lithium-ion battery, it features an auto-empty base that holds up to 30 days of dirt. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Auto-Empty Base, Charging dock, Dual side brushes, Self-cleaning brushroll, HEPA filter, Dust bin, Power adapter.

Feature	Description
Auto-Empty Base	Automatically empties robot's dust bin into base for up to 30 days
Smart Mapping	Creates a map of your home for efficient cleaning
Wi-Fi Connectivity	Connects to SharkClean app for control and scheduling
Voice Control	Works with Alexa and Google Assistant
Self-Cleaning Brushroll	Reduces hair wrap for maintenance-free cleaning
Multi-Surface Cleaning	Adjusts automatically between carpets and hard floors
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
HEPA Filtration	Captures 99.9% of dust and allergens
Boundary Strips	Virtual boundaries to restrict cleaning areas
Spot Cleaning	Intensive cleaning of a concentrated area

Installation & Setup

Unpack and inspect all components. Place Auto-Empty Base on a level surface.

Assemble Auto-Empty Base: Attach bag frame and insert dust bag.
Position the Base: Place against wall with at least 3 feet clearance on each side and 5 feet in front.
Charge the Robot: Place robot on charging contacts; ensure power is connected to base.
Install Side Brushes: Attach left and right side brushes to robot.

WARNING! Keep base away from stairs and high-traffic areas. Ensure charging contacts are clean.

First-Time Use

Power on robot; follow initial setup prompts.

Initial Charge: Allow robot to charge fully (approx. 4 hours) before first use.
Clear the Area: Remove small objects, cords, and loose rugs from floor.
Start Mapping Run: Press CLEAN button on robot or app to begin initial home mapping.
Name Your Rooms: Use SharkClean app to label rooms after mapping is complete.
Set Up Schedule: Create cleaning schedule via app for automated cleaning.

CAUTION! Do not pick up or move robot during initial mapping. Ensure Wi-Fi signal is strong.

Specifications

Model: Shark IQ RV2402WBUS
Type: Self-Emptying Robot Vacuum
Battery: Lithium-ion, rechargeable
Run Time: Up to 90 minutes per charge
Dust Capacity: Auto-Empty Base holds 30 days of dirt
Filtration: HEPA filter system
Connectivity: 2.4 GHz Wi-Fi only
Voice Control: Amazon Alexa, Google Assistant
Cleaning Modes: Auto, Spot, Room, Manual
Power Source: 120V AC, 60Hz
Weight: Robot: 8.6 lbs; Base: 10.4 lbs

Controls and Settings

Access controls via physical buttons, SharkClean app, or voice commands.

Robot Buttons: CLEAN (start/pause), SPOT (spot cleaning), DOCK (return to base), POWER (on/off).

App Controls: Start/stop cleaning, select rooms, set schedules, view cleaning history, adjust suction power, create no-go zones.

Voice Commands: "Alexa, ask Shark to start cleaning" or "Hey Google, tell Shark to clean the living room."

Settings: Suction power (Eco, Normal, Max), cleaning preferences, do-not-disturb mode, software updates.

Connecting to Wi-Fi & App

Connect robot to Wi-Fi for app control and smart features.

Download SharkClean app from Apple App Store or Google Play Store.
Create account or log in to existing Shark account.
Press and hold DOCK and SPOT buttons simultaneously for 3 seconds until Wi-Fi light flashes.
Follow in-app instructions to connect to your 2.4 GHz Wi-Fi network.
Name your robot and complete setup.

Tip: Ensure robot is near router during setup. Disable VPN if connection fails.

Cleaning Modes & Scheduling

Multiple cleaning modes for different needs.

Auto Mode: Robot cleans entire mapped area efficiently.
Room Select: Clean specific rooms via app selection.
Spot Cleaning: Concentrated cleaning in a 3x3 foot area.
Manual Control: Drive robot manually using directional controls in app.
Scheduling: Set daily or weekly cleaning schedules in app.
Recharge & Resume: Robot returns to charge, then resumes cleaning where it left off.
Edge Cleaning: Focuses on cleaning along walls and edges.

WARNING! Remove small objects and cords before cleaning. Use boundary strips for restricted areas.

Maintenance & Care

Regular maintenance ensures optimal performance.

Component	Maintenance Frequency	Procedure
Dust Bin	After each cleaning	Empty bin; rinse with water if needed
HEPA Filter	Every 3 months	Tap to remove dust; rinse every 6 months
Brushroll	Monthly	Remove and clear hair/debris
Side Brushes	Every 6 months	Check for wear; replace if damaged
Sensors & Charging Contacts	Weekly	Wipe with dry cloth
Auto-Empty Base Bag	When full (approx. 30 days)	Replace disposable bag
Wheels	Monthly	Remove debris from wheel axles

CAUTION! Unplug base before maintenance. Allow all parts to dry completely before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dirty contacts/placement	Clean charging contacts; ensure robot is properly docked
Wi-Fi connection issues	Weak signal/wrong network	Move router closer; ensure 2.4 GHz network; restart robot
Poor cleaning performance	Full dust bin/clogged brushroll	Empty dust bin; clear brushroll of debris
Robot getting stuck	Obstacles/cords in path	Clear floor of obstacles; use boundary strips
Auto-Empty not working	Full bag/clog in base	Replace dust bag; check for clogs in base hose
Error sounds/lights	Various issues	Consult app for error code; refer to manual
Map not saving	Robot moved/interrupted	Do not move robot during cleaning; run full mapping cycle

Reset: Hold CLEAN and DOCK buttons for 10 seconds to factory reset.

Service: 1-800-798-7398; sharkclean.com/support