Shark IQ RV2400WXUS Vacuum Cleaner Manual

The Shark IQ RV2400WXUS is a self-emptying robot vacuum with Wi-Fi connectivity, IQ Navigation, home mapping, voice control compatibility, and a self-cleaning brushroll. It features a bagless, self-emptying base that holds up to 30 days of dirt and debris. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Emptying 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot Vacuum, Self-Emptying Base, Power Adapter, Side Brushes, Filter, Charging Dock.

Feature	Description
Self-Emptying Base	Automatically empties robot's dustbin into base canister
IQ Navigation with Mapping	Creates a smart map of your home for efficient cleaning
Wi-Fi Connectivity	Connects to SharkClean app for control and scheduling
Voice Control	Works with Amazon Alexa and Google Assistant
Self-Cleaning Brushroll	Reduces hair wrap for maintenance-free cleaning
High-Efficiency Filter	Captures dust and allergens
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Boundary Strips	Virtual barriers to restrict cleaning areas (in app)
Dustbin Full Sensor	Alerts when robot dustbin needs emptying
Power Button	Turns robot on/off

Installation & Setup

Unpack and inspect contents. Place base on level surface against wall.

Install Side Brushes: Snap onto bottom of robot.
Charge Robot: Place robot on charging contacts in base; ensure power is connected.
Install Filter: Insert filter into robot's dustbin compartment.
Power Base: Plug base into wall outlet (120V).

WARNING! Keep base and robot away from stairs and wet areas. Ensure charging contacts are clean.

First-Time Use

Fully charge robot before first cleaning (approx. 4 hours).

Clear Floor: Pick up cords, small objects, and clutter.
Start Cleaning: Press CLEAN on robot or use app to start first cleaning run.
Initial Mapping: Robot will explore and map your home; this may take multiple runs.
Set Preferences: In app, name rooms, set no-go zones, and create cleaning schedule.

CAUTION! Do not pick up or move robot during initial mapping. Keep pets and children away.

Specifications

Model: Shark IQ RV2400WXUS.
Type: Self-Emptying Robot Vacuum.
Navigation: IQ Navigation with Smart Mapping.
Connectivity: Wi-Fi (2.4 GHz), SharkClean app, Alexa, Google Assistant.
Dust Capacity: Base holds up to 30 days of debris.
Filter: High-efficiency, washable.
Battery: Rechargeable lithium-ion.
Power Source: 120V AC, 60Hz.
Operating Time: Up to 90 minutes per charge.

Controls and Settings

Robot Buttons: POWER, CLEAN, DOCK, SPOT CLEAN. Base: Power indicator, Empty button.

App Controls: Start/Stop, Schedule, Select Rooms, Set Boundaries, View History, Error Alerts.

Cleaning Modes: Auto (whole house), Room Select (specific rooms), Spot Clean (focused area). Settings: Suction Power (Eco, Normal, Max), Recharge & Resume (On/Off), Carpet Boost (Auto). Mapping: Save multiple maps, edit rooms, set no-go zones. Notifications: Dustbin full, filter maintenance, error alerts.

Connecting to Wi-Fi & App

Download SharkClean app from App Store or Google Play.

Enable Robot: Ensure robot is on and near your Wi-Fi router.
Add Device: In app, tap "+", select Shark IQ Robot.
Connect to Wi-Fi: Follow in-app instructions to connect to 2.4 GHz network.
Voice Setup: Link to Alexa or Google Assistant via app.

Tip: Ensure Wi-Fi signal is strong where robot operates. Use 2.4 GHz band only.

Cleaning Modes & Scheduling

Supports scheduled and on-demand cleaning.

Auto Clean: Press CLEAN or use app to clean entire mapped area.
Room Select: In app, choose specific rooms to clean.
Spot Clean: Press SPOT button for intensive 2x2 ft area cleaning.
Schedule: Set daily/weekly cleaning times in app.
Recharge & Resume: Enabled by default; robot returns to dock if battery low, then resumes.
Boundary Setting: Draw no-go zones in app to restrict areas.
History: View cleaning reports in app.

WARNING! Do not use on wet surfaces. Remove small objects that may clog brushroll.

Maintenance & Emptying

Self-Emptying Base: Empties robot automatically after each run. Manually empty base canister when full (monthly). Robot Maintenance: Clean side brushes monthly; check and clear brushroll of debris; wash filter every 3 months.

Care & Cleaning

Unplug base before maintenance. Clean robot sensors and charging contacts with dry cloth. Wash filter with water; air dry completely before reinserting.

CAUTION! Do not immerse robot or base in water. Use only recommended cleaning methods.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dirty contacts/power	Clean charging contacts on robot and base; ensure base is plugged in.
Robot not connecting to Wi-Fi	Network/placement	Ensure 2.4 GHz network; move robot closer to router; restart robot.
Poor navigation	Dirty sensors/mapping	Clean sensors with dry cloth; delete and recreate map in app.
Suction power low	Full dustbin/clog	Empty robot dustbin; check for clogs in brushroll and airpath.
Base not emptying robot	Full canister/blockage	Empty base canister; check hose for blockages; ensure robot is seated properly.

Reset: Hold DOCK and CLEAN buttons for 10 seconds to reset robot.

Service: 1-800-798-7398; sharkclean.com