Shark IQ ROBOT SELF EMPTY XL UR1005AE Series Vacuum Cleaner Manual

The Shark IQ ROBOT SELF EMPTY XL UR1005AE Series is an advanced robotic vacuum cleaner featuring self-emptying technology, Wi-Fi connectivity, smart home integration, powerful suction with XL dust bin capacity, multi-surface cleaning, intelligent navigation with room mapping, voice control compatibility, and a self-cleaning brushroll. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Operation 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging dock, Remote Control, Dual side brushes, HEPA filter, Self-cleaning brushroll.

FeatureDescription
Self-Empty BaseAutomatically empties robot's dust bin into sealed bag
Wi-Fi ConnectivityConnects to SharkClean app for scheduling and control
IQ NavigationSmart sensor mapping for efficient room coverage
Voice ControlWorks with Amazon Alexa and Google Assistant
XL Dust BinHolds more debris between empty cycles
Multi-Surface CleaningAutomatically adjusts between carpets and hard floors
Boundary StripsMagnetic strips to define no-go zones
Recharge & ResumeReturns to dock to recharge, then resumes cleaning
HEPA FiltrationCaptures 99.9% of dust and allergens
Self-Cleaning BrushrollPrevents hair wrap during cleaning

Installation & Setup

Unpack and inspect all components. Place on level surface.

  1. Assemble Self-Empty Base: Insert disposable bag into base compartment.
  2. Position charging dock: Place against wall with 3 feet clearance on each side.
  3. Charge robot: Place robot on dock; ensure charging contacts align.
  4. Install side brushes: Snap onto bottom of robot.
  5. Power on: Plug base into wall outlet (120V AC).

WARNING! Keep away from stairs and ledges. Ensure charging area is dry and free of obstacles.

First-Time Configuration

Power on robot; follow initial setup prompts.

  1. Initial charge: Allow robot to charge fully (approx. 4 hours) before first use.
  2. Download SharkClean app: Available on iOS and Android.
  3. Connect to Wi-Fi: Use app to connect robot to your 2.4GHz network.
  4. Create home map: Let robot perform initial mapping run of your space.
  5. Set cleaning preferences: Adjust suction power, scheduling, and room labels in app.

CAUTION! Remove small objects, cords, and fragile items from floor before mapping.

Specifications

Controls and Settings

Access controls via physical buttons, remote, or app.

Robot Buttons: CLEAN (start/pause), DOCK (return to base), SPOT (clean concentrated area), Wi-Fi (connection indicator).

Remote: CLEAN, DOCK, SPOT, EDGE, MAX, SCHEDULE, CLOCK.

App Features: Schedule cleaning, Select rooms, View cleaning history, Adjust suction, Set no-go zones, Monitor filter life, Check bag status, Firmware updates.

Voice Commands: "Alexa, ask Shark to start cleaning" or "Hey Google, tell Shark to dock."

Connecting to Wi-Fi & App

Required for smart features and scheduling.

  1. Ensure robot is on dock and powered.
  2. Download SharkClean app from app store.
  3. Create account or log in.
  4. Follow in-app instructions to connect to 2.4GHz Wi-Fi network.
  5. Name your robot for easy identification.

Tip: Keep robot within range of your Wi-Fi router during setup. 5GHz networks are not supported.

Cleaning Operation

Multiple cleaning modes available.

  1. Start cleaning: Press CLEAN button or use app/voice command.
  2. Cleaning modes: Auto (whole house), Room (specific room), Spot (focused area), Edge (along walls).
  3. Suction settings: Eco (quiet), Normal (balanced), Max (deep clean).
  4. Scheduling: Set daily or weekly cleaning schedules in app.
  5. Self-empty: Robot returns to base when bin is full; base empties contents into bag.
  6. Recharge & resume: If battery runs low, robot docks, charges, then resumes where it left off.

WARNING! Do not pick up or move robot during cleaning cycle. Clear floor of small objects and cords.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust bin: Robot bin empties into base automatically; replace base bag every 30 days.
  2. Clean brushes: Remove and clean side brushes monthly; clear self-cleaning brushroll of debris weekly.
  3. Clean sensors: Wipe cliff sensors and charging contacts with dry cloth.
  4. Replace filter: HEPA filter should be replaced every 3-6 months.
  5. Clean wheels: Remove hair and debris from wheels regularly.

CAUTION! Unplug base before performing maintenance. Use only Shark brand replacement parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-888-228-5531. Disposal: Follow local regulations for electronic waste and battery disposal.

Troubleshooting

SymptomPossible CauseCorrective Action
Robot won't startLow battery/not dockedPlace on dock to charge; ensure power outlet is working.
Wi-Fi connection issuesNetwork/router problemsEnsure 2.4GHz network; restart robot and router; check app for updates.
Poor cleaning performanceFull bin/clogged brushEmpty dust bin; clean brushroll and filters; check for blockages.
Robot gets stuckObstacles/floor conditionsClear floor of cords and small objects; use boundary strips.
Self-empty base not workingFull bag/connection issueReplace bag; ensure robot is properly seated on base; check for blockages.
Error lights flashingVarious system errorsConsult manual error code chart; reset robot; contact support.

Reset: Hold CLEAN and DOCK buttons for 10 seconds to factory reset.

Service: 1-888-228-5531; sharkclean.com/support

Shark IQ ROBOT SELF EMPTY XL UR1005AE Series Vacuum Cleaner Manual © - All Rights Reserved 2025