Shark IQ ROBOT SELF-EMPTY UR1300S3US Vacuum Cleaner Manual

The Shark IQ ROBOT SELF-EMPTY UR1300S3US is an advanced robotic vacuum cleaner featuring self-emptying technology, Wi-Fi connectivity, smart home integration, multi-surface cleaning, and powerful suction. It includes the robot vacuum, a self-emptying base, charging dock, filters, side brushes, and a remote control. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unboxing & Contents 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the SharkClean App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Self-Emptying Base, Shark IQ Robot, Charging Dock, Dual Side Brushes, High-Efficiency Filter, Boundary Strips.

Feature	Description
Self-Emptying Base	Automatically empties robot's dustbin into a sealed bag
Wi-Fi Connectivity	Connects to SharkClean app for remote control and scheduling
Smart Home Integration	Works with Amazon Alexa and Google Assistant
Multi-Surface Cleaning	Adjusts suction for carpets and hard floors
Boundary Strips	Creates no-go zones for the robot
Recharge & Resume	Automatically returns to dock to recharge and resumes cleaning
Dirt Detect Technology	Focuses on dirtier areas with increased suction
HEPA Filter	Captures 99.9% of dust and allergens
Voice Control	Start/stop cleaning with voice commands
Auto-Empty Indicator	LED alerts when base bag needs replacement

Unboxing & Contents

Unpack and inspect all contents. Ensure all parts are present and undamaged.

Shark IQ Robot Vacuum (UR1300S3US)
Self-Emptying Base with power adapter
Charging Dock
Dual Side Brushes (2)
High-Efficiency Filter (installed)
Boundary Strips (2)
User Manual & Quick Start Guide

WARNING! The robot and base are heavy; lift with care to avoid injury. Keep packaging away from children and pets.

First-Time Setup

Prepare the robot for its first cleaning cycle.

Place the Self-Emptying Base: Position on a level surface against a wall, with at least 3 feet of clearance on each side and 5 feet in front.
Install Side Brushes: Attach to the bottom of the robot until they click into place.
Charge the Robot: Place robot on the charging dock. Initial charge takes approximately 4 hours.
Download SharkClean App: Available on iOS and Android. Follow in-app instructions to connect robot to your Wi-Fi network.
Set Up Boundary Strips: Place strips to block off areas where the robot should not go.

CAUTION! Ensure the base is on a stable, level surface. Do not place in direct sunlight or near heat sources.

Specifications

Model: Shark IQ Robot Self-Empty UR1300S3US
Suction Power: Advanced multi-surface brushroll with powerful suction
Battery: Lithium-ion, up to 90 minutes runtime
Dustbin Capacity: Robot: 0.2 quarts; Base Bag: 1.2 gallons (lasts up to 30 days)
Connectivity: 2.4 GHz Wi-Fi only
Compatibility: Amazon Alexa, Google Assistant
Filter: HEPA-style, washable
Dimensions (Robot): 13.8" diameter x 3.6" height
Weight: 8.6 lbs
Power Source: 120V AC, 60Hz

Controls and Settings

Robot Top Buttons: CLEAN (start/pause), DOCK (return to base), SPOT (clean a focused area), WiFi (indicator).

SharkClean App: Start/Stop cleaning, schedule cleanings, view cleaning history, set no-go zones, adjust suction power, check filter/battery status.

Cleaning Modes: AUTO (default), ECO (quiet, longer runtime), MAX (deep clean). Scheduling: Set daily or weekly cleaning schedules. Voice Control: "Alexa, ask Shark to start cleaning." Maintenance Alerts: App notifies when to empty bin, clean filter, or replace brushes.

Using the SharkClean App

Control and monitor your robot remotely.

Download & Install: Search "SharkClean" in App Store or Google Play.
Create Account: Register with email address.
Add Robot: Follow in-app prompts to connect robot to Wi-Fi (2.4 GHz network required).
Features: Start/stop cleaning, schedule, view map of cleaned areas, set virtual boundaries, adjust settings, receive notifications.

Tip: Ensure robot is near your Wi-Fi router during setup. Restart router if connection fails.

Cleaning Modes & Scheduling

Supports multiple cleaning modes and automated scheduling.

Start Cleaning: Press CLEAN button on robot or use app.
Select Mode: In app, choose AUTO, ECO, or MAX.
Spot Clean: Press SPOT button for concentrated 3-foot diameter cleaning.
Schedule: In app SCHEDULE tab, set days/times for automatic cleaning.
Recharge & Resume: If battery runs low, robot returns to dock, recharges, then resumes cleaning where it left off.
Boundary Control: Use physical strips or set virtual boundaries in app (if supported).

WARNING! Clear floor of cords, small objects, and fragile items before cleaning. Keep robot away from water and wet floors.

Maintenance & Care

Regular maintenance ensures optimal performance.

Task	Frequency	Instructions
Empty Robot Dustbin	After each cleaning	Press release button, remove bin, empty into trash.
Replace Base Bag	When indicator light turns red	Open base door, remove full bag, insert new bag.
Clean Filter	Every month	Remove filter, tap to remove dust, rinse with water (air dry 24 hrs).
Clean Brushes & Wheels	Every 2 weeks	Remove hair and debris from brushroll, side brushes, and wheels.
Clean Sensors	Monthly	Wipe cliff sensors and charging contacts with dry cloth.

CAUTION! Unplug base before maintenance. Do not use damaged filters or brushes. Allow filter to dry completely before reinstalling.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-888-228-5531.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/not docked	Place on charger; ensure charging contacts are clean.
Wi-Fi connection lost	Router issues/out of range	Restart robot and router; ensure within Wi-Fi range.
Poor cleaning performance	Full dustbin/clogged filter	Empty dustbin; clean filter; clear brushroll of debris.
Robot getting stuck	Obstacles/cluttered floor	Clear floor of cords and small objects; use boundary strips.
Self-Empty base not working	Full bag/blockage	Replace bag; check hose for clogs; ensure base is plugged in.
Error lights flashing	Various faults	Consult manual error code chart; reset robot (hold CLEAN + DOCK for 10s).

Reset: In app, go to Settings > Robot Settings > Reset Robot.

Service: 1-888-228-5531; sharkclean.com