Shark IQ ROBOT SELF-EMPTY UR1100S1US Vacuum Cleaner Manual

The Shark IQ Robot Self-Empty UR1100S1US is an intelligent robotic vacuum cleaner featuring self-emptying technology, Wi-Fi connectivity, voice control compatibility, smart home integration, multi-surface cleaning, and advanced navigation with room mapping. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Self-Emptying Base 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Emptying Base, Charging dock, Remote Control, Side brushes, HEPA filter, Dust bin.

FeatureDescription
Self-Emptying BaseAutomatically empties robot's dust bin into a sealed bag
IQ NavigationLaser-based mapping for efficient room coverage
Wi-Fi ConnectivityConnects to SharkClean app for control and scheduling
Voice ControlWorks with Amazon Alexa and Google Assistant
Multi-Surface CleaningAutomatically adjusts between carpets and hard floors
Boundary StripsVirtual no-go zones to restrict cleaning areas
HEPA FiltrationCaptures 99.9% of dust and allergens
Recharge & ResumeReturns to dock to recharge, then resumes cleaning
Spot CleaningIntensive cleaning of a concentrated area
Dock ButtonSends robot back to charging base

Installation & Setup

Unpack and inspect all contents. Place base on a level surface.

  1. Install Self-Emptying Base: Place against wall with 3 feet clearance on each side and 5 feet in front.
  2. Charge robot: Place robot on charging contacts at base; ensure power cord is connected.
  3. Install side brushes: Attach by pressing until they click into place.
  4. Install filter: Insert HEPA filter into dust bin compartment.
  5. Power on: Press POWER button on robot or dock.

WARNING! Keep base away from stairs and high-traffic areas. Ensure charging contacts are clean.

First-Time Use

Fully charge robot before first use (approx. 4 hours).

  1. Clear floor area: Remove small objects, cords, and loose rugs.
  2. Map your home: Allow robot to run a full cleaning cycle to create a map.
  3. Set up Wi-Fi: Download SharkClean app and follow in-app instructions.
  4. Name rooms: Use app to label rooms in your map for targeted cleaning.
  5. Set schedule: Program cleaning times via app or voice command.

CAUTION! Do not pick up or move robot during initial mapping cycle.

Specifications

Controls and Settings

Physical Controls: POWER, DOCK, SPOT CLEAN, CLEAN on robot. Base: POWER, EMPTY button.

App Controls: Start/Stop, Schedule, Select Rooms, Set Boundaries, View History, Battery Status.

Cleaning Modes: Auto (whole home), Room Select (specific rooms), Spot (concentrated area). Settings: Suction Power (Eco, Normal, Max), Carpet Boost (On/Off), Do Not Disturb (schedule quiet hours). Mapping: Save multiple maps, edit room dividers, set no-go zones.

Connecting to Wi-Fi & App

Requires 2.4GHz Wi-Fi network and SharkClean app.

  1. Download SharkClean app from Apple App Store or Google Play Store.
  2. Create account or log in.
  3. Press and hold DOCK and SPOT buttons on robot for 3 seconds until Wi-Fi light flashes.
  4. Follow in-app prompts to connect robot to your network.
  5. Name your robot and sync with voice assistant if desired.

Tip: Ensure robot is near your Wi-Fi router during setup. Disable VPN if connection fails.

Cleaning Modes & Scheduling

Supports automated and manual cleaning cycles.

  1. Start cleaning: Press CLEAN on robot or use app/voice command.
  2. Select mode: Choose Auto, Room Select, or Spot Clean via app.
  3. Set schedule: In app, set daily or weekly cleaning times for specific rooms.
  4. Pause/Resume: Press CLEAN button to pause; press again to resume.
  5. Send to dock: Press DOCK button or use "Go to dock" voice command.
  6. Check status: App shows cleaning progress, battery level, and error alerts.
  7. Boundary strips: Place physical strips or set virtual boundaries in app.

WARNING! Remove pet bowls, cables, and small objects before cleaning. Not for wet pickup.

Self-Emptying Base

Base holds up to 30 days of dirt in sealed bag.

  1. Automatic emptying: Robot returns to base after cleaning; base empties dust bin.
  2. Manual empty: Press EMPTY button on base to trigger emptying cycle.
  3. Replace bag: When full indicator lights, open lid, remove and replace bag.
  4. Bag disposal: Seal bag and discard; use genuine Shark replacement bags.

CAUTION! Do not use vacuum without bag installed. Keep base on level surface.

Care & Maintenance

Regular maintenance ensures optimal performance.

CAUTION! Unplug base before maintenance. Do not wash filter; tap clean only.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-888-228-5531. This device complies with Industry Canada license-exempt RSS standard(s).

Troubleshooting

SymptomPossible CauseCorrective Action
Robot not chargingDirty contacts/misalignmentClean charging contacts on robot and base; ensure proper alignment.
Poor navigationDirty sensors/obstaclesClean sensors; clear floor of obstacles; remap area.
Wi-Fi connection lostNetwork issuesRestart robot and router; reconnect in app; ensure 2.4GHz network.
Self-empty not workingFull bag/clogReplace bag; check for clogs in base hose; ensure bin is seated.
Weak suctionFull bin/clogged filterEmpty dust bin; clean filter; clear brush roll of debris.
Error lights flashingVarious faultsConsult manual error code chart; restart robot; contact support.

Reset: Hold CLEAN and DOCK buttons for 10 seconds to factory reset.

Service: 1-888-228-5531; sharkclean.com/support

Shark IQ ROBOT SELF-EMPTY UR1100S1US Vacuum Cleaner Manual © - All Rights Reserved 2025