Shark IQ ROBOT SELF-EMPTY UR1000SR Vacuum Cleaner Manual

The Shark IQ ROBOT SELF-EMPTY UR1000SR is an intelligent robotic vacuum cleaner featuring self-emptying technology, Wi-Fi connectivity, smart mapping, voice control compatibility, multi-surface cleaning, and a high-efficiency filter system. It is designed for automated home cleaning with scheduled routines and obstacle avoidance. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Self-Emptying Base 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Emptying Base, Charging dock, Remote Control, Side brushes, High-efficiency filter, Dust bin.

Feature	Description
Self-Emptying Base	Automatically empties robot's dust bin into a sealed bag
Smart Mapping	Creates a map of your home for efficient cleaning
Wi-Fi Connectivity	Connects to SharkClean app for remote control
Voice Control	Works with Amazon Alexa and Google Assistant
Multi-Surface Cleaning	Adjusts automatically for carpets and hard floors
Obstacle Avoidance	Uses sensors to navigate around furniture and objects
DOCK	Returns to base for charging or emptying
CLEAN	Starts a cleaning cycle
SPOT	Cleans a concentrated area
POWER	Turns robot on/off

Installation & Setup

Unpack and inspect all components. Place base on a level surface.

Charge the robot: Place robot on charging dock until battery is full.
Install side brushes: Attach to the bottom of the robot.
Set up Self-Emptying Base: Ensure it is plugged into power and has a bag installed.
Clear the area: Remove small objects, cords, and clutter from floors.

WARNING! Keep base away from stairs or ledges. Ensure charging contacts are clean and dry.

First-Time Configuration

Power on robot; follow app prompts for setup.

Download SharkClean app: Available on iOS and Android.
Connect to Wi-Fi: Use app to connect robot to your home network.
Create smart map: Allow robot to clean and map your home.
Set up voice control: Link with Alexa or Google Assistant.
Schedule cleaning: Set daily or weekly routines in the app.

CAUTION! Do not place base on uneven surfaces. Keep robot away from water.

Specifications

Model: Shark IQ ROBOT SELF-EMPTY UR1000SR.
Battery: Lithium-ion, up to 90 minutes runtime.
Dust Bin Capacity: 0.2 quarts (robot), 30 days (base bag).
Connectivity: 2.4 GHz Wi-Fi, Bluetooth.
Compatibility: SharkClean app, Alexa, Google Assistant.
Cleaning Modes: Auto, Spot, Edge, Max.
Filter: High-efficiency anti-allergen filter.
Power Source: 120V AC, 60Hz.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Access controls via physical buttons, remote, or app. Robot Buttons: POWER, DOCK, CLEAN, SPOT.

Remote: POWER, DOCK, CLEAN, SPOT, EDGE, MAX, directional arrows.

App Settings: Schedule, No-Go Zones, Room Select, Cleaning History, Filter reset. Robot Settings: Suction power (Eco, Normal, Max), carpet boost, obstacle sensitivity. Base Settings: Emptying frequency, bag full alerts.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and SharkClean app.

Ensure robot is on and near your router.
Open app and follow in-app instructions to connect.
Select your Wi-Fi network and enter password.
Wait for connection confirmation.

Tip: If connection fails, restart robot and router, ensure Wi-Fi is 2.4 GHz.

Cleaning Modes & Scheduling

Supports multiple cleaning modes for different needs.

Auto: Cleans entire mapped area efficiently.
Spot: Concentrates on a 3x3 foot area.
Edge: Focuses on walls and edges.
Max: Maximum suction for deep cleaning.
Schedule: Set daily or weekly cleanings in app.
Room Select: Choose specific rooms to clean via app.
No-Go Zones: Mark areas to avoid in the app.

WARNING! Remove small objects and cords before cleaning to prevent jams.

Self-Emptying Base

Base automatically empties robot's dust bin into a sealed bag.

Ensure base is plugged in and has a bag installed.
Robot returns to base after cleaning or when bin is full.
Base empties bin in about 30 seconds.
Replace bag when full indicator lights up (lasts about 30 days).

CAUTION! Only use Shark-branded bags. Do not use with wet debris.

Care & Maintenance

Regular maintenance ensures optimal performance.

Empty dust bin: After each cleaning if not using self-empty base.
Clean brushes: Remove hair and debris from brush roll weekly.
Clean sensors: Wipe cliff and navigation sensors with dry cloth.
Replace filter: Every 3 months or as needed.
Clean charging contacts: Ensure they are free of dust.

CAUTION! Unplug base before maintenance. Do not use water on robot.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This device complies with Industry Canada license-exempt RSS standard(s).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dirty contacts/base placement	Clean charging contacts; ensure robot is properly docked.
Robot not connecting to Wi-Fi	Network issues	Restart robot and router; ensure 2.4 GHz network.
Poor cleaning performance	Full bin/clogged brushes	Empty dust bin; clean brush roll and filters.
Robot getting stuck	Obstacles/clutter	Clear floor of cords and small objects; use No-Go Zones.
Self-Emptying Base not working	Full bag/blockage	Replace bag; check for blockages in base hose.

Reset: Hold DOCK and CLEAN buttons for 10 seconds to reset robot.

Service: 1-800-798-7398; sharkclean.com