Shark IQ ROBOT SELF-EMPTY RV1100SRCA Series Vacuum Cleaner Manual

The Shark IQ ROBOT SELF-EMPTY RV1100SRCA Series is an intelligent robotic vacuum cleaner featuring self-emptying technology, Wi-Fi connectivity, smart home integration, multi-surface cleaning, advanced navigation with room mapping, and a high-efficiency filter system. It is designed for automated cleaning schedules and hands-free maintenance. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Self-Emptying Base 10. Care & Maintenance 11. Regulatory Information 12. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Emptying Base, Charging Dock, Side Brushes, High-Efficiency Filter, Remote Control, Power Adapter.

Feature	Description
Self-Emptying Base	Automatically empties robot's dustbin into a sealed bag
IQ Navigation	Laser-based mapping for efficient room coverage
Wi-Fi Connectivity	Connects to SharkClean app for remote control
Multi-Surface Cleaning	Adjusts suction for carpets and hard floors
Voice Control	Works with Amazon Alexa and Google Assistant
High-Efficiency Filter	Traps 99% of dust and allergens
Boundary Strips	Virtual barriers to restrict cleaning areas
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Dirt Detect	Focuses cleaning on high-traffic areas
Spot Cleaning	Intensive clean of a concentrated area

Installation & Setup

Unpack and inspect all components. Place on a level, stable surface.

Assemble Self-Emptying Base: Insert disposable bag into base compartment.
Position Charging Dock: Place against wall with at least 3 feet clearance on each side and 5 feet in front.
Charge Robot: Place robot on dock; ensure charging contacts align. Initial charge takes ~4 hours.
Install Side Brushes: Attach brushes to bottom of robot until they click into place.

WARNING! Keep base away from stairs and high-traffic areas. Ensure power cord is not a tripping hazard.

First-Time Configuration

Power on robot; follow initial setup prompts via app or robot buttons.

Download SharkClean App: Available on iOS and Android.
Connect to Wi-Fi: Press and hold CLEAN button on robot until Wi-Fi light flashes, then follow app instructions.
Create Home Map: Allow robot to perform initial whole-home cleaning to generate a map.
Set Preferences: In app, label rooms, set no-go zones, and adjust suction settings.

CAUTION! Clear floor of small objects, cords, and fragile items before first run.

Specifications

Model: RV1100SRCA Series.
Power Source: Rechargeable lithium-ion battery.
Run Time: Up to 90 minutes per charge.
Dustbin Capacity: 0.2 quarts (robot), 1.2 gallons (base bag).
Filter Type: High-Efficiency Filtration System.
Connectivity: 2.4 GHz Wi-Fi only.
Compatibility: Amazon Alexa, Google Assistant.
Operating Noise: ≤ 65 dB.
Weight: 8.6 lbs (robot).
Input Voltage: 120V AC, 60Hz.

Controls and Settings

Access controls via physical buttons, remote, or SharkClean app.

Robot Buttons: CLEAN (start/pause), DOCK (return to base), SPOT (spot clean), Wi-Fi (connection).

App Settings: Cleaning schedules, room-specific cleaning, suction power (Eco, Normal, Max), mapping preferences, history.

Voice Commands: "Alexa, ask Shark to start cleaning," "Hey Google, tell Shark to go home."

Connecting to Wi-Fi & App

Ensure robot is charged and within range of your 2.4 GHz Wi-Fi network.

Open SharkClean app and create an account.
Press and hold CLEAN and DOCK buttons simultaneously for 5 seconds until voice prompt says "Wi-Fi ready."
Follow in-app instructions to connect robot to your network.
Update firmware if prompted.

Tip: If connection fails, restart robot and router, ensure Wi-Fi password is correct.

Cleaning Modes & Scheduling

Supports whole-home, room-specific, and spot cleaning.

Start Cleaning: Press CLEAN on robot or app, or use voice command.
Select Mode: Choose Eco (quiet), Normal (balanced), or Max (deep clean).
Schedule: In app, set daily or weekly cleaning times for specific rooms.
Manual Control: Use directional arrows in app to drive robot manually.
Pause/Resume: Press CLEAN button to pause; press again to resume.
Return to Dock: Press DOCK button or use app/voice command.

WARNING! Do not pick up robot during cleaning; allow it to return to dock on its own.

Self-Emptying Base

Base automatically empties robot's dustbin after each cleaning cycle.

Ensure base is plugged in and bag is properly installed.
Robot returns to base; emptying process begins automatically (audible suction).
Replace bag when full (indicator light on base turns red).
To manually empty, press button on base to release dustbin compartment.

CAUTION! Use only Shark-branded replacement bags. Do not operate with full or missing bag.

Care & Maintenance

Unplug base before maintenance. Regular upkeep ensures optimal performance.

Empty Robot Dustbin: After each cycle, remove and empty dustbin.
Clean Filter: Tap filter gently to remove dust; rinse every 3 months (air dry completely).
Clean Brushes: Remove hair and debris from main brush and side brushes weekly.
Clean Sensors: Wipe cliff and navigation sensors with dry cloth.
Clean Charging Contacts: Wipe robot and dock contacts with dry cloth.

CAUTION! Do not use water on robot body or base electronics. Allow all parts to dry completely before reassembly.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-888-228-5531.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dirty contacts/misalignment	Clean charging contacts; ensure robot is properly seated on dock.
Poor navigation	Dirty sensors/obstacles	Clean sensors; clear floor of clutter and cords.
Wi-Fi connection lost	Network issues	Restart robot and router; reconnect via app.
Weak suction	Full dustbin/clogged filter	Empty dustbin; clean filter and brushes.
Self-Empty base not working	Full bag/blockage	Replace bag; check for blockages in hose and port.
Robot stuck frequently	Complex obstacles	Use boundary strips; clear problematic areas before scheduling.

Reset: Hold CLEAN and DOCK buttons for 10 seconds to reset robot.

Service: 1-888-228-5531; sharkclean.com/support