Shark IQ ROBOT Self-Empty RV1000S Series Vacuum Cleaner Manual

The Shark IQ ROBOT Self-Empty RV1000S Series is an intelligent robotic vacuum cleaner featuring self-emptying technology, Wi-Fi connectivity, smart home integration, multi-surface cleaning, advanced navigation with room mapping, voice control compatibility, and a high-capacity self-cleaning brushroll. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Operation 8. Maintenance Features 10. Care & Cleaning 11. Regulatory Information 12. Troubleshooting

Features at a Glance

Key components: Robot Vacuum, Self-Empty Base, Charging Dock, Remote Control, Side Brushes, High-Efficiency Filter, Boundary Strips.

Feature	Description
Self-Empty Base	Automatically empties robot's dustbin into a sealed bag
IQ Navigation	Laser-based mapping for efficient room-by-room cleaning
Wi-Fi Connectivity	Connects to SharkClean app for scheduling and control
Voice Control	Works with Amazon Alexa and Google Assistant
Multi-Surface Brushroll	Cleans carpets and hard floors without switching
Boundary Strips	Creates no-go zones for the robot
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Dirt Detect	Focuses cleaning on high-traffic areas
Spot Clean	Intensively cleans a concentrated area
Max Mode	Increases suction power for deep cleaning

Installation & Setup

Unpack and inspect all contents. Place on a level, stable surface.

Assemble Self-Empty Base: Insert bag into base, connect power adapter.
Prepare Robot: Install side brushes, ensure filter is in place.
Charge Robot: Place robot on charging dock; ensure contacts align.
Clear Area: Remove loose cords, small objects, and clutter from floor.

WARNING! Keep base and robot away from stairs and wet areas. Ensure charging contacts are clean and dry.

First-Time Configuration

Power on robot; follow initial setup prompts.

Initial Charge: Allow robot to charge fully (approx. 4 hours) before first use.
Download App: Install SharkClean app from Apple App Store or Google Play.
Connect to Wi-Fi: Use app to connect robot to your 2.4GHz home network.
Create Map: Let robot perform a full cleaning run to map your home.
Set Preferences: In app, name rooms, set no-go zones, and create schedules.

CAUTION! Do not move the robot or base during initial mapping. Ensure Wi-Fi signal is strong in cleaning area.

Specifications

Model Series: RV1000S.
Navigation: LaserSmart IQ Navigation with room mapping.
Suction Power: Adjustable (Eco, Normal, Max).
Dustbin Capacity: Robot: 0.2 quarts; Base Bag: 1.0 gallon (lasts up to 30 days).
Battery: Lithium-ion, up to 90 minutes runtime (Eco mode).
Connectivity: 2.4GHz Wi-Fi, Bluetooth.
Compatibility: Amazon Alexa, Google Assistant, IFTTT.
Filter: High-Efficiency Filtration System (HEPA-style).
Power Source: 120V AC, 60Hz.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Access controls via Physical Buttons, Remote Control, or SharkClean App.

Robot Buttons: CLEAN (Start/Pause), DOCK (Return to Base), SPOT (Spot Clean), MAX (Suction Power).

App Controls: Start/Stop, Schedule, Select Rooms, Set No-Go Zones, View Cleaning History, Adjust Suction, Enable Recharge & Resume.

Voice Commands: "Alexa, ask Shark to start cleaning." "Hey Google, tell Shark to go home."

Settings: Cleaning Mode (Eco/Normal/Max), Do Not Disturb Schedule, Map Saving, Software Updates.

Connecting to Wi-Fi & App

Requires 2.4GHz Wi-Fi network and smartphone/tablet.

Ensure robot is on dock and powered on.
Open SharkClean app, create/log in to account.
Follow in-app instructions to connect robot to Wi-Fi.
Name your robot (e.g., "Living Room Robot") for easy identification.

Tip: If connection fails, restart robot and router, ensure phone Bluetooth is on.

Cleaning Operation

Supports whole-home, room-specific, and spot cleaning.

Start Cleaning: Press CLEAN on robot or app, or use voice command.
Select Mode: Choose Eco (quiet), Normal (balanced), or Max (deep clean).
Room Selection: In app, select specific rooms to clean.
Spot Clean: Press SPOT button for intensive 2x2 ft area cleaning.
Pause/Resume: Press CLEAN to pause; press again to resume.
Send Home: Press DOCK or use app/voice to return to base.
Recharge & Resume: If enabled, robot will recharge and continue unfinished job.

WARNING! Clear floor of pet waste, liquids, cords, and fragile items before cleaning. Not for use on wet surfaces.

Maintenance Features

Self-Emptying: Base automatically empties robot's dustbin after each run. Monitor bag fullness in app. Brushroll Cleaner: Base includes self-cleaning mechanism for brushroll. Filter Alert: App notifies when filter needs cleaning.

Care & Cleaning

Unplug base before maintenance. Regularly empty base bag, clean robot sensors, clear brushroll of hair/debris, and wash filter.

CAUTION! Do not use water on robot or base electronics. Use dry cloth only. Replace filter every 6-12 months.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/obstruction	Place on dock to charge; clear path of obstacles.
Lost Wi-Fi connection	Network issues	Restart robot and router; reconnect in app.
Poor navigation	Dirty sensors/dark room	Clean sensors with dry cloth; ensure adequate lighting.
Self-Empty base not working	Full bag/jam	Replace bag; check for clogs in base chute.
Brushroll not spinning	Tangled hair/debris	Turn off robot, remove and clean brushroll.
Error beeps/flashing light	Various faults	Consult app notification or manual error code chart.

Reset: Hold DOCK and CLEAN buttons for 10 seconds to reset robot.

Service: 1-888-228-5531; sharkclean.com/support