Shark IQ ROBOT SELF-EMPTY QR1000S Series Vacuum Cleaner Manual

The Shark IQ ROBOT SELF-EMPTY QR1000S Series is an intelligent robotic vacuum cleaner featuring self-emptying technology, Wi-Fi connectivity, smart home integration, laser-based navigation, multi-surface cleaning, and a high-efficiency filter system. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Self-Emptying Base 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot Vacuum, Self-Emptying Base, Charging Dock, Remote Control, Side Brushes, High-Efficiency Filter, Dust Bin.

Feature	Description
Self-Emptying Base	Automatically empties robot's dust bin into base bag
LaserSmart™ Navigation	Precision mapping and room recognition
Wi-Fi Connectivity	Connects to SharkClean app for remote control
Multi-Surface Cleaning	Adjusts suction for carpets and hard floors
Voice Control	Works with Amazon Alexa and Google Assistant
High-Efficiency Filter	Traps 99% of dust and allergens
Boundary Strips	Virtual no-go zones via app
Recharge & Resume	Returns to dock to recharge and resumes cleaning
Dual Side Brushes	Sweeps debris into vacuum path
Power Button	Turns robot on/off

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

Assemble Self-Emptying Base: Insert bag into base compartment.
Position Charging Dock: Place against wall with 3 feet clearance on each side.
Charge Robot: Place robot on dock; ensure charging contacts align.
Install Side Brushes: Snap brushes onto bottom of robot.
Install Filter: Insert filter into dust bin compartment.

WARNING! Keep away from stairs and high thresholds. Ensure area is clear of loose wires and small objects.

First-Time Configuration

Power on robot; follow app prompts for setup.

Download SharkClean App: Available on iOS and Android.
Connect to Wi-Fi: Press Wi-Fi button on robot; select network in app.
Name Your Robot: Assign a unique name for identification.
Initial Mapping Run: Allow robot to clean entire area to create map.
Set Preferences: Configure cleaning modes, schedules, and no-go zones.

CAUTION! Ensure firmware is updated for optimal performance.

Specifications

Model Series: QR1000S.
Navigation: LaserSmart™ Mapping.
Suction Power: Adjustable via app (Eco, Normal, Max).
Battery: Lithium-ion, up to 90 minutes runtime.
Dust Bin Capacity: 0.5 liters (robot), 30 days (base bag).
Connectivity: 2.4 GHz Wi-Fi, Bluetooth.
Compatibility: iOS 11+, Android 7+, Amazon Alexa, Google Assistant.
Filter Type: HEPA-style high-efficiency filter.
Power Source: 100-240V AC, 50/60Hz.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Access controls via physical buttons, remote, or SharkClean app.

Robot Buttons: POWER, CLEAN, SPOT CLEAN, DOCK, Wi-Fi.

App Controls: Start/Stop, Schedule, Select Room, Set No-Go Zones, Suction Power, History.

Cleaning Modes: Auto (whole house), Room Select (specific rooms), Spot Clean (focused area), Manual (remote control).

Settings: Voice prompts (On/Off), Carpet Boost (Auto/Off), Do Not Disturb schedule, Filter reset reminder.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and SharkClean app.

Ensure robot is powered on and near router.
Press and hold Wi-Fi button until light flashes blue.
Open SharkClean app; follow in-app instructions.
Select your Wi-Fi network and enter password.
Wait for connection confirmation (solid blue light).

Tip: If connection fails, restart robot and router, ensure correct Wi-Fi band.

Cleaning Modes & Scheduling

Supports multiple cleaning modes and smart scheduling.

Auto Clean: Robot cleans entire mapped area.
Room Select: Choose specific rooms via app map.
Spot Clean: Concentrates on 3x3 foot area.
Manual Control: Use app as virtual remote.
Schedule: Set daily/weekly cleaning times.
Recharge & Resume: Enabled by default; robot returns to dock if battery low, then resumes.
History: View cleaning reports in app.

WARNING! Clear floor of obstacles before cleaning. Keep away from wet areas.

Self-Emptying Base

Base automatically empties robot's dust bin after cleaning.

Ensure base is plugged in and bag properly installed.
Robot returns to base after cleaning cycle.
Base activates, emptying contents into bag.
Bag full indicator light alerts when replacement needed.
Replace bag every 30 days or when full.

CAUTION! Use only Shark-branded replacement bags. Do not use with wet debris.

Care & Maintenance

Regular maintenance ensures optimal performance.

Empty Dust Bin: After each cleaning cycle (if not using self-empty).
Clean Filter: Tap gently monthly; replace every 6-12 months.
Clean Brushes: Remove hair and debris from main brush and side brushes weekly.
Clean Sensors: Wipe laser window and cliff sensors with dry cloth.
Clean Charging Contacts: On robot and dock with dry cloth.

CAUTION! Unplug base before maintenance. Do not wash filter; tap clean only.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com/support or contact 1-888-228-5531.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/obstruction	Place on dock to charge; clear path; ensure POWER is on.
Not connecting to Wi-Fi	Network/band issues	Ensure 2.4 GHz network; restart robot/router; check password.
Poor navigation	Dirty sensors/bright light	Clean laser window and sensors; avoid direct sunlight on sensors.
Self-empty not working	Full bag/clog	Replace bag; check for clogs in base hose; ensure robot is docked properly.
Suction power low	Full bin/clogged filter	Empty dust bin; clean filter; check for blockages in air path.

Reset: Hold DOCK and SPOT CLEAN buttons for 10 seconds to reset Wi-Fi.

Service: 1-888-228-5531; sharkclean.com/support