Shark IQ ROBOT AV993 Series Vacuum Cleaner Manual

The Shark IQ ROBOT AV993 Series is a smart, self-emptying robot vacuum cleaner with Wi-Fi connectivity, voice control compatibility (Alexa/Google Assistant), advanced navigation with IQ Navigation™, home mapping, room-by-room cleaning, and a self-cleaning brushroll. It features a self-empty base that holds up to 30 days of dirt, dual multi-surface brushes, and a high-efficiency filter. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking & Setup 3. First-Time Use 4. Specifications 5. Controls and Indicators 6. Using the SharkClean App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging dock, Power adapter, Dual side brushes, Filter, User manual.

Feature	Description
Self-Empty Base	Automatically empties robot's dustbin into base for up to 30 days
IQ Navigation™	Laser-based navigation for efficient room mapping and cleaning
Wi-Fi Connectivity	Connects to SharkClean app for remote control and scheduling
Voice Control	Works with Amazon Alexa and Google Assistant
Home Mapping	Creates smart map of your home for room-specific cleaning
Self-Cleaning Brushroll	Anti-hair wrap technology prevents hair tangles
Dual Multi-Surface Brushes	Cleans carpets and hard floors effectively
High-Efficiency Filter	Captures 99% of dust and allergens
Recharge & Resume	Automatically returns to dock to recharge, then resumes cleaning
Boundary Strips	Virtual boundaries to keep robot out of specific areas

Unpacking & Setup

Unpack and inspect all contents. Place base on level surface.

Install side brushes: Snap onto bottom of robot at marked locations.
Position charging base: Place against wall in open area, clear of obstacles.
Connect power: Plug base into wall outlet.
Charge robot: Place robot on charging contacts; ensure POWER light illuminates.
Install app: Download SharkClean app from App Store or Google Play.

WARNING! Keep base and robot away from stairs and wet areas. Ensure charging contacts are clean.

First-Time Use

Fully charge robot before first use (approx. 4 hours).

Prepare home: Clear floor of cords, small objects, and fragile items.
Power on: Press CLEAN button on robot or in app.
Initial mapping run: Robot will explore and map your home (may take multiple runs).
Name rooms: Use app to label rooms on the map for targeted cleaning.
Set schedules: Create cleaning schedules for specific rooms or whole home.

CAUTION! Do not pick up robot during cleaning cycle. Allow it to return to dock on its own.

Specifications

Model: Shark IQ ROBOT AV993 Series
Navigation: IQ Navigation™ with laser mapping
Connectivity: Wi-Fi 2.4GHz, Bluetooth
Voice Control: Amazon Alexa, Google Assistant
Dustbin Capacity: 0.2 gallons (robot), 1.0 gallons (base)
Run Time: Up to 90 minutes per charge
Charging Time: Approximately 4 hours
Filter: High-efficiency, washable
Power Source: 120V AC, 60Hz
Operating Temp: 32°F to 104°F (0°C to 40°C)

Controls and Indicators

Robot Top: CLEAN button, SPOT CLEAN button, DOCK button, Wi-Fi indicator light, Battery indicator.

App Controls: Start/Stop, Room Select, Schedule, Map Management, Settings.

Indicator Lights: Solid blue (charging), Flashing blue (cleaning), Solid red (error/attention needed). Base Indicators: Solid white (power on), Flashing white (emptying robot), Solid red (base full or error).

Using the SharkClean App

Connect robot to Wi-Fi via app for full functionality.

Download SharkClean app and create account.
Follow in-app instructions to connect robot to your Wi-Fi network.
Use app to: Start/stop cleaning, select specific rooms, set cleaning schedules, view cleaning history, manage home map, set virtual boundaries, receive notifications.
Enable voice control: Link Shark skill with Alexa or Google Assistant.

Tip: Ensure robot is near Wi-Fi router during initial setup for best connection.

Cleaning Modes & Scheduling

Multiple cleaning modes available through app and robot buttons.

Whole Home Cleaning: Cleans entire mapped area.
Room Cleaning: Select specific rooms in app for targeted cleaning.
Spot Cleaning: Press SPOT button for intensive 2x2 foot area cleaning.
Manual Control: Use directional arrows in app to drive robot manually.
Scheduling: Set daily/weekly schedules for automatic cleaning.
Recharge & Resume: Enabled by default; robot returns to charge then resumes where it left off.
Eco Mode: Quieter operation with slightly reduced suction.

WARNING! Do not use on wet surfaces or to pick up liquids. Keep away from pet accidents.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dustbin: Robot alerts when full; empty into trash.
Clean filter: Remove and tap out debris weekly; wash monthly (air dry 24 hours).
Clean brushes: Remove hair and debris from main brushroll and side brushes weekly.
Clean sensors: Wipe cliff sensors and navigation camera with dry cloth.
Clean charging contacts: Wipe robot and base contacts with dry cloth monthly.
Replace parts: Side brushes (every 6-12 months), filter (every 12 months), battery (as needed).

CAUTION! Unplug base before performing maintenance. Do not use water on electronic components.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-888-228-5531.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot won't charge	Dirty contacts/placement	Clean charging contacts; ensure robot is properly seated on dock.
Robot not connecting to Wi-Fi	Network issues	Ensure 2.4GHz network; restart router; reconnect in app.
Poor navigation	Dirty sensors/obstacles	Clean sensors; clear floor of obstacles; ensure good lighting.
Weak suction	Full dustbin/clog	Empty dustbin; check for clogs in brushroll and airpath.
Robot stuck frequently	Map inaccuracies	Delete and recreate home map; use boundary strips for problem areas.
App not controlling robot	Connection loss	Restart robot and app; check Wi-Fi connection; re-pair if needed.
Error lights flashing	Various issues	Consult app for specific error code; refer to manual for solutions.

Reset: Hold DOCK and SPOT buttons for 10 seconds to factory reset.

Service: 1-888-228-5531; sharkclean.com/support