Shark IQ ROBOT 1000AE Series Vacuum Cleaner Manual

The Shark IQ ROBOT 1000AE Series is a smart, self-emptying robot vacuum with Wi-Fi connectivity, voice control compatibility, home mapping technology, and a self-cleaning brushroll. It features a high-efficiency filter, cliff sensors to prevent falls, and a bagless, self-emptying base that holds up to 30 days of dirt. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking & Setup 3. First-Time Configuration 4. Specifications 5. Controls and Indicators 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Emptying 10. Care & Storage 11. Regulatory Information 12. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging dock, Side brushes, High-efficiency filter, Remote control (if included), Power adapter.

Feature	Description
Self-Empty Base	Automatically empties robot's dustbin into base for up to 30 days
Smart Mapping	Creates a map of your home for efficient cleaning
Wi-Fi Connectivity	Connects to SharkClean app for control and scheduling
Voice Control	Works with Amazon Alexa and Google Assistant
Self-Cleaning Brushroll	Reduces hair wrap for maintenance-free cleaning
Cliff Sensors	Prevents falls down stairs and drops
High-Efficiency Filter	Captures dust and allergens
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Spot Cleaning	Intensively cleans a concentrated area
Boundary Strips	Virtual barriers to restrict cleaning zones

Unpacking & Setup

Unpack and inspect all contents. Place base on a level surface.

Install side brushes: Align and press onto robot's bottom until they click.
Position the base: Place on hard floor against wall, with 3 feet clearance on each side and 5 feet in front.
Charge the robot: Place robot on dock contacts; ensure POWER light on base is solid blue.
Install filter: Insert filter into robot's dustbin compartment.

WARNING! Keep base away from stairs, direct sunlight, and heat sources. Ensure charging contacts are clean.

First-Time Configuration

Power on robot; follow initial setup prompts.

Initial charge: Allow robot to charge fully (approx. 4 hours) before first use.
Clear the area: Remove small objects, cords, and loose rugs from floor.
Download app: Install SharkClean app from Apple App Store or Google Play.
Create map: Let robot perform a full cleaning run to map your home.
Set preferences: In app, name rooms, set no-go zones, and create cleaning schedules.

CAUTION! Do not pick up or move robot during initial mapping. Ensure cliff sensors are clean.

Specifications

Model Series: Shark IQ ROBOT 1000AE.
Power Source: Rechargeable lithium-ion battery.
Run Time: Up to 90 minutes per charge (varies by floor type).
Dust Capacity: Self-Empty Base holds up to 30 days of debris.
Connectivity: 2.4 GHz Wi-Fi required.
Compatibility: Amazon Alexa, Google Assistant.
Filter Type: High-efficiency, washable.
Cleaning Modes: Auto, Room, Spot, Manual control via app.
Operating Temp: 32°F to 104°F (0°C to 40°C).
Input Voltage: 120V AC, 60Hz.

Controls and Indicators

Robot Top: CLEAN button, SPOT CLEAN button, DOCK button, Wi-Fi indicator light, Battery indicator. Self-Empty Base: POWER light (blue), STATUS light, EMPTY button.

App Controls: Start/Pause, Dock, Room select, Schedule, Map editing, History. Voice: "Alexa, ask Shark to start cleaning."

Indicator Lights: Solid blue = Charging/Ready; Flashing blue = Error/Attention needed; Solid red = Critical error; Flashing green = Wi-Fi setup mode.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network (not 5 GHz).

Enable robot's Wi-Fi: Press and hold DOCK and SPOT buttons for 5 seconds until Wi-Fi light flashes green.
Open SharkClean app: Follow in-app instructions to connect robot to your network.
Name your robot: Assign a unique name for voice control.
Update firmware: App will prompt if update is available.

Tip: Ensure robot is near router during setup. Disable VPN on mobile device.

Cleaning Modes & Scheduling

Supports multiple cleaning modes for different needs.

Auto Clean: Robot cleans entire mapped area efficiently.
Room Clean: Select specific rooms in app for targeted cleaning.
Spot Clean: Robot spirals outward from a 3-foot diameter spot.
Manual Control: Use app as virtual joystick to drive robot.
Scheduling: Set daily or weekly cleaning times in app.
Recharge & Resume: Enabled by default; robot returns to dock if battery low, then resumes.
Boundary Setting: Use app to draw no-go zones or use physical boundary strips.

WARNING! Remove fragile items from floor. Keep pets away during cleaning cycles.

Maintenance & Emptying

Regular maintenance ensures optimal performance.

Task	Frequency	Instructions
Empty Base Bin	When full indicator lights	Press EMPTY button on base; remove and empty bin.
Clean Robot Dustbin	After each cleaning cycle	Remove dustbin, empty debris, tap filter clean.
Wash Filter	Every month	Rinse under cold water; air dry 24 hours completely.
Clean Side Brushes	Weekly	Remove and clear wrapped hair/debris.
Clean Sensors & Charging Contacts	Monthly	Wipe with dry cloth.
Check Main Brushroll	Weekly	Remove brushroll, clear hair and debris.
Replace Parts	As needed	Side brushes (every 6-12 months), filter (every year).

CAUTION! Do not use robot with wet filter. Ensure all parts are dry before reassembly.

Care & Storage

Store in a cool, dry place. For long-term storage, charge battery to 50% and power off.

CAUTION! Do not store near water or in extreme temperatures. Keep away from children and pets.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com/support or contact 1-888-228-5531.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dirty contacts/dock issue	Clean robot and dock contacts; ensure dock plugged in; reposition robot.
Robot not connecting to Wi-Fi	Network/Setup error	Ensure 2.4 GHz network; restart robot and router; redo setup in app.
Poor cleaning performance	Full bin/blocked brush	Empty dustbin and base; clean brushroll and filter; check for blockages.
Robot getting stuck	Obstacles/cliff sensors	Clear floor of cords/objects; clean cliff sensors; use boundary strips.
Error lights flashing	Various errors	Consult app for specific error code; restart robot; check manual.
Self-Empty Base not working	Full bin/jam	Empty base bin; check for clogs in hose; press EMPTY button again.
Map not saving	Interrupted cleaning	Allow complete mapping run; ensure consistent Wi-Fi.

Reset: Press and hold CLEAN button for 10 seconds to reboot. Factory reset via app.

Service: 1-888-228-5531; sharkclean.com/support