Shark IP3251UKT Vacuum Cleaner Manual

The Shark IP3251UKT is a cordless stick vacuum cleaner featuring powerful suction, a lightweight design, a removable battery, multiple cleaning modes, a motorized brushroll for carpets and hard floors, a large dust cup, HEPA filtration, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body, Motorized floor nozzle, Removable battery and charger, Crevice tool, Dusting brush, Upholstery tool, Wall mount.

Assembly & Parts Identification

Unpack and inspect all contents. Assemble before first use.

1. Attach the wand: Insert the wand into the main vacuum body until it clicks.
2. Attach the floor nozzle: Connect the wand to the motorized floor nozzle until it locks.
3. Insert the battery: Slide the battery into the slot on the vacuum body until it clicks.
4. Attach accessories: Store tools on the wall mount or attach directly to the wand as needed.

WARNING! Ensure the vacuum is turned off and the battery is not inserted during assembly to avoid accidental start-up.

First-Time Setup & Charging

Charge the battery fully before first use.

1. Plug the charger into a standard wall outlet.
2. Connect the charger to the charging port on the battery or dock.
3. Charge until the battery indicator shows a solid green light (approx. 4 hours).
4. Install the fully charged battery into the vacuum.
5. Press the power button to begin use.

CAUTION! Use only the provided Shark charger. Do not charge near water or heat sources.

Specifications

• Model: Shark IP3251UKT Cordless Stick Vacuum.
• Power Source: Rechargeable Lithium-Ion Battery.
• Run Time: Up to 40 minutes (varies by power mode).
• Charging Time: Approximately 4 hours.
• Dust Cup Capacity: 0.7 Liters.
• Filtration: HEPA Filter, Washable.
• Attachments: Motorized floor nozzle, Crevice tool, Dusting brush, Upholstery tool.
• Weight: 2.7 kg (approx.).
• Noise Level: Standard for household vacuum cleaners.

Controls and Settings

Main controls located on the handle. Power Button: Press once for standard mode, press again for boost mode, press a third time to turn off. Battery Indicator: LED lights show charge level (Green=High, Amber=Medium, Red=Low/Charging).

Cleaning Modes: Standard (for everyday cleaning), Boost (for maximum suction on tough messes).

Brushroll Control: Automatically engages on carpets and retracts on hard floors. Manual brushroll shut-off may be available for delicate rugs.

Using Attachments

For above-floor cleaning, detach the wand from the floor nozzle.

1. Press the wand release button to separate the wand from the floor nozzle.
2. Attach the desired tool (crevice, dusting brush, upholstery) directly to the wand or handle.
3. Use the power button to activate suction.
4. To return to floor cleaning, reattach the wand to the floor nozzle until it clicks.

Tip: Ensure attachments are clicked firmly into place to maintain suction power.

Cleaning Modes & Operation

Optimize cleaning for different surfaces.

1. For carpets: Use with motorized floor nozzle engaged. The brushroll will spin automatically.
2. For hard floors: The brushroll typically retracts to prevent scattering debris.
3. For high-pile rugs: Consider using the standard mode; if needed, manually turn off the brushroll if the feature exists.
4. For above-floor cleaning: Use appropriate attachment as described in section 7.
5. Emptying the dust cup: Press the release button, remove the cup, and empty contents into trash. Reinstall until it clicks.

WARNING! Do not vacuum large, hard, or wet objects (coins, paperclips, liquids) as they may damage the vacuum.

Maintenance & Care

Regular maintenance ensures optimal performance.

• Empty Dust Cup: Empty after each use or when full.
• Clean Filters: Rinse the HEPA filter and pre-motor filter with cold water every 3 months. Allow to dry completely for 24 hours before reinstalling.
• Clear Brushroll: Regularly remove hair and fibers wrapped around the brushroll. Use scissors if necessary.
• Check for Blockages: Inspect the wand, floor nozzle, and dust cup inlet if suction power decreases.
• Battery Care: Store and charge at room temperature. For long-term storage, charge to 50%.

CAUTION! Always turn off and remove the battery before performing any maintenance. Do not use the vacuum with wet filters.

Regulatory Information

This appliance complies with relevant EU directives and UK regulations. The crossed-out wheelie bin symbol indicates separate collection for electrical waste (WEEE). Do not dispose of with household waste. For proper recycling, contact your local council or retailer. Copyright © SharkNinja Operating LLC. Shark is a registered trademark. For support, visit www.sharkclean.co.uk or contact customer service.

Troubleshooting

Reset: Remove and reinsert the battery. For persistent issues, perform a full system reset as per manual (if applicable).

Service: For warranty service or parts, contact Shark Customer Service: www.sharkclean.co.uk